• Communications for Statistical Applications and Methods
• /
• v.3 no.2
• /
• pp.13-19
• /
• 1996

Cook's distance(Cook, 1997) is one of the most widely used influence measures to assess the influence of single observations or sets of observations in the linear regression model. After computing Cook(1977) suggested guidelines based on a confidence ellipsoid for the regression parameter ${\beta}$. In this paper, we suggest cutoff values for Cook's distance cia Monte Carlo simulation, and compare them with Cook's guidelines. An example based on a real data set is given.

• Fashion & Textile Research Journal
• /
• v.11 no.4
• /
• pp.621-632
• /
• 2009

The purpose of this study was to analyze the physical characteristic of the wheelchair users by directly measuring the disabled men who use a wheelchair and to classify body types. The subjects were 178 male wheelchair users 20-69 years range of age. The results of this study were as follows. The cause of disability was classified into four groups; Poliomyelitis(P), Spinal Cord Injury(S), Cerebral Palsy(C), Amputee(A). There was a remarkable difference in the physical characteristic of the wheelchair users due to their cause of disability. A have greater values in all the dimensions. P have the largest drop values and smaller values in the lower body dimensions. S have greater values in the height of upper body trunk, back interscye length, and chest circumference, whereas smaller values in waist front length and thigh circumference. C have smaller values in most body dimensions except circumference of lower limb. By the factor analysis on the anthropometric data came out the result to be eight factors. The result of cluster analysis using factor scores shows the body types of wheelchair users can be divided into four body types; PY, RBB, TBP, RA. PY type is short and has the largest drop values, whereas RBB type tends to have the smallest drop values. TBP type is tall and the torso tends to be larger than those of the other types. RA type has smaller values in front body dimensions and moderate values in other dimensions. The diversity in body types should be considered among the wheelchair users.

• Journal of the Korean Home Economics Association
• /
• v.49 no.9
• /
• pp.99-109
• /
• 2011

The purpose of this study was to characterize the new women, modern girls and modern boys from the 1920's to the 1930's as a modern new generation, the primary consumer of modern consumption culture, and to examine their values, lifestyles, consumption culture and clothing attitudes. The data were obtained from the magazines and newspapers published from 1920's to 1930's and previous literatures, and analyzed by qualitative content analysis. The results were as follows: A modern new generation meant the new women, modern girls, and modern boys seeking for the western looks and cultural tastes. The values of a new generation people were individualism, materialism, and modernism which was the same as Americanism. They enjoyed western lifestyles and sports and consumed new mass media and popular culture. Their clothing attitudes were fashion orientation, conformity, symbolism, conspicuous consumption, aesthetic value, individuality, and practicality.

• Journal of the Korean Chemical Society
• /
• v.56 no.2
• /
• pp.188-194
• /
• 2012

The interaction of 4-alkylbenzoic acid isomers with the micellar system of TTAB (tetradecyltrimethylammonium bromide) was studied by the UV/Vis spectrophotometric method. The solubilization constants ($K_s$) of 4-alkylbenzoic acid isomers into the TTAB micellar system and the critical micelle concentration (CMC) of TTAB have been measured with the change of temperature. Various thermodynamic parameters have been calculated and analyzed from those measurements. The results show that the values of ${\Delta}G^o{_s}$ for the solubilization of all the isomers are negative and the values of ${\Delta}H^o{_s}$ and ${\Delta}S^o{_s}$ are all positive within the measured temperature range. The effects of additives (n-butanol and NaCl) on the solubilization of 4-alkylbenzoic acid isomers have been also measured. There was a great change on the values of $K_s$ and CMC simultaneously with these additives. From these changes we can postulate that the solubilization sites of 4-alkylbenzoic acids are the core or deep palisade region of the TTAB micelle.

• Journal of Applied Reliability
• /
• v.16 no.4
• /
• pp.305-312
• /
• 2016

Purpose: The purpose of this study is to provide a sensitivity analysis of system reliability for recognizing effectiveness of changing of BD mode failures using reliability growth projection model based on NHPP. Methods: Crow extended reliability projection model (CERPM) is used to analyze the changing of two factors 1) the number of BD mode failures, 2) fix effectiveness factor (FEF) values. Results: The system reliability has increased in accordance with the number of BD mode failures and FEF values have increased. Conclusion: It is necessary to design failure modes and FEF values to supervise the reliability.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.4
• /
• pp.10-14
• /
• 2013

In this study, we have numerically investigated the hydraulic efficiency with various values of discharge angle($11^{\circ}$, $12^{\circ}$, $14^{\circ}$, $15^{\circ}$, $17^{\circ}$, $18^{\circ}$, $20^{\circ}$) in the Francis turbine of hydropower generation under 15MW with fixed values of head range of 151m and flow rate($10.97m^3/s$). We also conducted the numerical analysis with constant inlet angle in the Francis turbine using the commercial code, ANSYS CFX. Hydraulic characteristics for different values of the runner blade angle are investigated. The results showed that the change of discharge angles significantly influenced on the performance of the turbine hydraulic efficiency.

• Water Engineering Research
• /
• v.3 no.4
• /
• pp.247-258
• /
• 2002

This paper presents a non-isotropic turbulence modeling of flows over bedforms. The Reynolds stress model is used for the turbulence closure. In the model, Launder, Reece, and Rodi's model and Hanjalic and Launder's model are employed f3r the pressure strain correlation term and the diffusion term, respectively. The mean flow and turbulence structures are simulated and compared with profiles measured in the experiments. The numerical solutions from two-equation turbulence models are also provided for comparisons. The Reynolds stress model yields the separation length of eddy similar to the other numerical results. Using the developed model, the resistance coefficients are also estimated for the flows at different Froude numbers. Karim's (1999) relationship is used to determine the bedform geometry. It is found that the values of the form drag and the skin friction are very similar to those obtained by the other turbulence models. meaning higher values of the form drag and lower values of the skin friction compared with the empirical formulas.

• International Journal of Railway
• /
• v.7 no.1
• /
• pp.8-15
• /
• 2014

Recently, in the total railroad construction field, concrete slab tracks have been adapted in place of ballast tracks. Because ballast tracks need frequent maintenance and are difficult to handle due to increasing maintenance costs, eventually concrete slab tracks were selected as an alternative. However, owing to the hydration heat reactions and temperature-affected shrinkage of the concrete, a variety of studies to solve maintenance problems related to concrete slab tracks are underway. This study analyzed characteristics of TQI values evaluating track irregularity, investigated the relationship between crack progress and TQI, and then evaluated the correlation between the two values. Through our analysis, we found that there is a need to supplement the problems of the current method and develop a track evaluation index which takes cracking into account. We also concluded that TQI is the main decision-making tool in track maintenance.

• Bulletin of the Korean Chemical Society
• /
• v.5 no.3
• /
• pp.112-117
• /
• 1984

The association constants (K) of 3,5,N-trimethyl pyridinium iodide in 95 volume percent ethanol-water mixed solvent were determined by a modified UV and conductance method at $25^{\circ},\;30{\circ},\;40{\circ}\;and\;50{\circ}C$ over the pressure range 1 to 2000 bars. The association process is enhanced with increasing pressure and decreasing temperature. From K values, we obtained the total partial molar volume change (${\Delta}V$) and some thermodynamic parameters. The electrostriction volume (${\Delta}V_{el}$) and intrinsic volume (${\Delta}V_{in}$) were also evaluated. The values of ${\Delta}V,\;{\Delta}V_{el},\;{\Delta}V_{in}$ are negative, negative and positive, respectively, and the absolute values of all these three decrease with increasing pressure and temperature. The ion-pair size (a) were varied 3 to 6 ${\AA}$, with pressure and temperature. The solvation number (n) decreased from 2 to 0.5 with increasing temperature.

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.203-212
• /
• 2012

This study aims to test presence of spatial autocorrelation of burn severity in Uljin and Youngduk areas burned in 2011. SPOT satellite images were used to compute the NDVI representing burn severity, and NDVI values were sampled for 5,000 randomly dispersed points for each site. Spatial autocorrelations of sampled NDVI values were analyzed with Moran's I and Variogram models. Moran's I values of burn severity in Uljin and Youngduk areas were 0.7745 and 0.7968, respectively, indicating presence of strong spatial autocorrelations. On the basis of Variogram and changes of Moran's I values by lag class, ideal sampling distance were proposed, which were 566-2,151 m for Uljin and 272-402 m for Youngduk. It was recommended to apply these ranges of sampling distance in flexible corresponding to Anisotropic characteristics of burned areas.