• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.173-178
• /
• 1998

An automatic Q. C. tester for a production line of electric grinder is developed using vibration signals. The methods of measuring and analyzing the vibration signals are found through several experiments at laboratory and production line. The experiments show that checking a vibration signal at running condition only, without any sound signal, is enough to judge whether the product is good or not. The Q. C. tester is made of accelerometer and PC. Measured vibration signal using accelerometer is transmitted to PC through A/D board. Vibration level are calculated using FFT algorithm in PC for already selected five frequency bands, which can specify the cause of fault. The Judging criteria of vibration levels of each bands are decided through a lot of experiment with the comparison of manual judgement.

• 한국해양학회지
• /
• v.8 no.2
• /
• pp.61-67
• /
• 1973

The small shrimp of the genus Acetes which is abundantly distributed in shallow waters along the western coast of Korea has long been considered as Acetes japonicus Kishinouye. In the other hand Liu(1956) has suggested that A. chinensis was possibly distributed in Korean waters, judging from the information from Yoshida(1941), but none of the specimen was collected from this area. After careful examination of the specimens of Acetes collected from the station (37$^{\circ}$39'N, 126$^{\circ}$23'E) in Sokmo channel, central part of Korea authors agreed that the population distributed in this area is consists of Acetes chinensis Hansen. In the present paper the diagnosis of Korean species of Acetes chinensis has first described with taxonomic revision and it is the new record for Korean waters.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.1
• /
• pp.22-30
• /
• 2004

A micro-fluidic oscillator is used to control a linear actuator in a dynamic microsystem. The pressure difference at its two output ports causes the linear actuator to move, and it is a standard of judging the performance of the oscillator. The performance can be improved by optimizing the geometry of the oscillator, which has to enable fluid jet to switch at low inlet velocity. For this, in this study the relationship between the pressure coefficient (difference) and geometric parameters is obtained through the analysis using the software FLUENT. From the results the optimized model that maximize the output pressure difference is obtained by using a cyclic coordinate method that is one of optimization methods. As a result not only the performance is improved, but also the working range is more widen.

• Economic and Environmental Geology
• /
• v.23 no.1
• /
• pp.11-23
• /
• 1990

Pyrophyllite, kaolinite, and alunite deposits distributing in Southwestern parts of Cheonnam are classified into three types of minerals assemblages by the results of X-ray diffraction analysis etc. The first mineral assemblages contains pyrophyllite, kaolinite, dickite, quartz, diaspore and/or corundum, the second one contains alunite inseads of corundum, and the third one contains alunite without pyrophyllite and diaspore. It is can be considered that the depoSits which consist mainly of pyrophyllite are formed higher temperature than the other deposits. Judging form the chemical analyses the chemical compositions of hydrothermal solutions acting to the deposits seem to be relatively simple. But the hydrothermal solutions which generated Dogcheon, Jugjcon, Ogmaesan, and Seongsan mine contain rather somewhat higher $K_2O$. The values of the Trace Elements and REE analysis of the host rocks of deposits suggest that the host rocks are these deposits are the last products of magmatic differentiation.

• Korean System Dynamics Review
• /
• v.10 no.2
• /
• pp.81-102
• /
• 2009

Based on various employment and technology data in the cultural sector from the mid-1990s to the mid-2000s in Seoul, Korea, this research examines whether technology- and human resource-oriented programs exert significant impact on creative manpower, R&D technology level and tolerance. After briefly introducing Seoul's trends in the culture industry, it tries to explain major reinforcing and balancing loops. The stock-flow diagram of the culture industry in Seoul is applied to estimate relative effectiveness of technology- and human resource-oriented cultural programs cultural programs. Judging from a series of simulated experiments, technology-oriented cultural programs are essential to increase creative manpower and R&D technology level in the short term. For the first half of research period, this research finds that human resource-oriented cultural programs put forth minimal impact, if they even exist at all. The trends, however, are reversed in the long term: Both size of creative manpower and R&D technology level absolutely depend on human resource-oriented cultural programs in the second half.

• Journal of the Korean Society of Food Culture
• /
• v.1 no.3
• /
• pp.279-294
• /
• 1986

In order to survey the traditional salt production at the eastern coast, Young-Hae, in Yi-dynasty, data of salt production were collected through interviewing with whom had received the skill from ancestors and analyzed the data. The results obtained were as follows. Salt-producer take the salt water containing much salt and then he transported the salt-water by having water buckets an back in with using the water-toting device (Mul ji ge). Finally he carried out the irrigation (Mul dae gi) to a ditch (Dorang). It is noteworthy that the East-sea salt production method was not selecting a method of salt-pond style with a bank for salt production but using the salt water transportation fashion without a bank for that. Judging from these facts, we could conclude that traditional salt production method was handed down into the Yi-dynasty from ancient times.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.54-59
• /
• 2011

LED lightings typically do not fail catastrophically during use. However, over time the light output will gradually depreciate. Even if there are same LED lighting, they are so different at all. because of dissimilar the use and environment of each LED lighting. In this paper, we make a description of reliability analysis procedures for the degradation data using collected field data. Reliability analysis procedures are consisted of estimating degradation models and failure time, verification of distribution and parameters of the distribution, and reliability measures estimation. At some point in time, the light emitted from an LED lightings depreciates to a level where it is no longer considered adequate for a specific application.

• Smart Structures and Systems
• /
• v.17 no.5
• /
• pp.795-817
• /
• 2016

A non-contact, in-situ and non-invasive technique for health monitoring of submerged fiber reinforced polymers (FRP) laminates has been developed using ultrasonic guided waves. A pair of mobile transducers at specific angles of incidence to the submerged FRP specimen was used to excite Lamb wave modes. Lamb wave modes were used for comprehensive inspection of various types of manufacturing defects like air gaps and missing epoxy, introduced during manufacturing of FRP using Vacuum Assisted Resin Infusion Molding (VARIM). Further service induced damages like notches and surface defects were also studied and evaluated using guided waves. Quantitative evaluation of transmitted ultrasonic signal in defect ridden FRPs $vis-{\grave{a}}-vis$ healthy signal has been used to relate the extent of damage in FRPs. The developed technique has the potential to develop into a quick, real time health monitoring tool for judging the service worthiness of FRPs.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.2
• /
• pp.1-9
• /
• 1998

The rate constants of hydrolysis of N-tert-butyl-${\alpha}$-phenylnitrone and its derivatives have been determined by UV spectrophotometry at $25^{\circ}C$ and a rate equation which can be applied over a wide pH range was obtained. On the basis of rate equations derived and judging from the hydrolysis products obtained and general base and substituent effects, plausible mechanism of hydrolysis in various pH range have been proposed. Below pH 4.5, the hydrolysis was initiated by the protonation and followed by the addition of water to ${\alpha}-carbon$. Above pH 10.0, the hydrolysis was proceeded by the addition of hydroxides ion to ${\alpha}-carbon$. In the range of 4.5${\sim}$10.0 the addition of water to nitrone was rate controlling step.

• Structural Engineering and Mechanics
• /
• v.26 no.2
• /
• pp.151-162
• /
• 2007

Rigorous analytical solutions are obtained for the plane stress problem of a rectangular plate subjected to non-linearly distributed bending loads on two opposite edges. They are then used in a Galerkin type solution to obtain the corresponding convergent buckling loads. It is shown that the critical bending moment depends significantly on the actual edge load distribution and further the number of nodal lines of the buckled configuration can also be different from that corresponding to a linear antisymmetric distribution of the bending stresses. Results are tabulated for future use while judging approximate numerical solutions.