• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1758-1764
• /
• 2012

A large number of wire rope has been used in various inderstiries as Cranes and Elevators from expanding the scale of the industrial market. But now, the management of wire rope is used as manually operated by rope replacement from over time or after the accident.It is caused to major accidents as well as economic losses and personal injury. Therefore its time to need periodic fault diagnosis of wire rope or supply of real-time monitoring system. Currently, there are several methods has been reported for fault diagnosis method of the wire rope, to find out the feature point from extracting method is becoming more common compared to time wave and model-based system. This method has implemented a deterministic modeling like the observer and neural network through considering the state of the system as a deterministic signal. However, the out-put of real system has probability characteristics, and if it is used as a current method on this system, the performance will be decreased at the real time. And if the random noise is occurred from unstable measure/experiment environment in wire rope system, diagnostic criterion becomes unclear and accuracy of diagnosis becomes blurred. Thus, more sophisticated techniques are required rather than deterministic fault diagnosis algorithm. In this paper, we developed the fault diagnosis of the wire rope using probability density estimation techniques algorithm. At first, The steady-state wire rope fault signal detection is defined as the probability model through probability distribution estimate. Wire rope defects signal is detected by a hall sensor in real-time, it is estimated by proposed probability estimation algorithm. we judge whether wire rope has defection or not using the error value from comparing two probability distribution.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1978-1984
• /
• 2016

This paper proposes a robust vehicle detecting method by using Adaboost and CLAHE(Contrast-Limit Adaptive Histogram Equalization). We propose two method to detect vehicle effectively. First, we are able to judge rainy and night by converting RGB value to brightness. Second, we can detect a taillight, designate a ROI(Region Of Interest) by using CLAHE. And then, we choose an Adaboost algorithm by comparing traditional vehicle detecting method such as GMM(Gaussian Mixture Model), Optical flow and Adaboost. In this paper, we use proposed method and get better performance of detecting vehicle. The precision and recall score of proposed method are 0.85 and 0.87. That scores are better than GMM and optical flow.

• Ocean and Polar Research
• /
• v.36 no.3
• /
• pp.277-288
• /
• 2014

The Korean government is considering the implementation of a project to develop a deep-sea human-operated vehicle (HOV) to improve the level of deep-sea research. Information on the scientific benefits from the project is urgently needed in order to come to a decision about whether to implement the project. This paper measures the conservation value of developing nine attributes associated with HOV by using the choice experiment (CE). A survey of about 356 experts was undertaken and 132 experts completely responded to the survey. To deal with the CE data from the survey, we employed a multinomial logit model. All the coefficient estimates are statistically significant and consistent with prior expectations. Therefore, we can judge that the respondents' works required in the CE survey were within their cognitive abilities and they reported responsible and significant values. Each marginal willingness to pay for each attribute associated with the HOV is statistically significant and provides good information on the scientific values with regard to developing the HOV. The results can be utilized in evaluating and planning several alternatives related to developing the HOV.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.6
• /
• pp.1063-1079
• /
• 2010

Vehicle ad hoc networks (VANET) are one of the most important technologies to provide various ITS services. While VANET requires rapid and reliable transmission, packet transmission in VANET is unstable because of high mobility. Many routing protocols have been proposed and assessed to improve the efficiency of VANET. However, topology-based routing protocols generate heavy overhead and long delay, and position-based routing protocols have frequent packet loss due to inaccurate node position. In this paper, we propose a position-based routing repair algorithm to improve the efficiency of VANET. This algorithm is proposed based on the premise that AODV (-PGB) can be used effectively in VANET, if the discovery, maintenance and repair mechanism of AODV is optimized for the features of VANET. The main focus of this algorithm is that the relay node can determine whether its alternative node exits and judge whether the routing path is disconnected. If the relay node is about to swerve from the routing path in a multi-hop network, the node recognizes the possibility of path loss based on a defined critical domain. The node then transmits a handover packet to the next hop node, alternative nodes and previous node. The next node repairs the alternative path before path loss occurs to maintain connectivity and provide seamless service. We simulated protocols using both the ideal traffic model and the realistic traffic model to assess the proposed algorithm. The result shows that the protocols that include the proposed algorithm have fewer path losses, lower overhead, shorter delay and higher data throughput compared with other protocols in VANET.

• Journal of Families and Better Life
• /
• v.32 no.5
• /
• pp.15-30
• /
• 2014

This study aims to analyze what factors are associated with child care accreditation in Chungbuk province. This study examined three questions about which factors influence the accreditation of childcare centers: 1) if they passed the accreditation criteria, 2) the total score on the accreditation criteria, and 3) the domain scores for the six domains of environment, management, process, interaction and teaching, health and nutrition, and safety. The characteristics of 1,212 childcare centers, the independent variables, were commit management, type, specialized service, maximum capacity of children, registration ratio, target age groups of children, duration, and city size. The formal expert committee evaluated objective scores for 952 childcare centers. I derived the data for this study from the i-sarang Childcare Information Portal site (http://info.childcare. go.kr/). Frequency, descriptive statistics, binary logit model, and OLS model analysis were used to examine the accreditation and scores by factors of childcare centers. The findings of the present study are as follows. First, about 80% of the 1,212 childcare centers in Chungbuk province were accredited. Second, the accreditation of the child care center was affected by the specialized service, registration ratio, and duration. Finally, the total score of accredited childcare centers was associated with the maximum capacity of children, registration ratio, and duration. The factors of childcare centers influencing sub-area scores were different by environment, interaction and teaching, health and nutrition, and safety. The present study is important because it offers preliminary data identifying accreditation characteristics that can judge problems related to the quality of service of childcare centers and suggest childcare policy implications.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.97-103
• /
• 2008

This study is to present a fainting motion recognizing method by using fish-eye lens images to sense emergency situations. The camera with fish-eye lens located at the center of the ceiling of the living room sends images, and then the foreground pixels are extracted by means of the adaptive background modeling method based on the Gaussian complex model, which is followed by tracing of outer points in the foreground pixel area and the elliptical mapping. During the elliptical tracing, the fish-eye lens images are converted to fluoroscope images. the size and location changes, and moving speed information are extracted to judge whether the movement, pause, and motion are similar to fainting motion. The results show that compared to using fish-eye lens image, extraction of the size and location changes. and moving speed by means of the conversed fluoroscope images has good recognition rates.

• Journal of Digital Contents Society
• /
• v.5 no.4
• /
• pp.251-256
• /
• 2004

The flatness of a silicon wafer concerned with ULSI chip is one of the most critical parameters ensuring high yield of wafers. That is necessary to constitute the circuit with high quality for he surface of silicon wafer, which comes to be base to make the direct circuit of the semiconductor, Flatness, therefore, is the most important factor to guarantee it wafer with high quality. The process of polishing is one of the most crucial production line among 10 processing stages to change the rough surface into the flatnees with best quality. Currently at this process, it is general for an engineer in charge to observe, judge and control the model of wafer from the monitor of measuring equipment with his/her own eyes to enhance the degree of flatness. This, however, is quite a troublesome job for someone has to check of process by one's physical experience. The purpose of this study is to approach the model of wafer with digital contents and to apply the result of the research for an algorithm which enables to control the polishing process by means of measuring the degree of flatness automatically, not by person, but by system. In addition, this paper shows that this algorithm proposed for the whole wafer flatness enables to draw an estimated algorithm which is for the thickness of sites to measure the degree of flatness for each site of wafer.

• Korean Journal of Community Nutrition
• /
• v.7 no.2
• /
• pp.266-276
• /
• 2002

In this study, a computerized nutritional and health guide program for workers was developed. The dietitian at the work site could utilize periodically conducted medical examination data to develop an effective health care counseling model based on the developed Nutritional and Health Guide Program. A personal computer (Pentium II PC MMX-150, 32MB RAM, 2.95 GB HDD) with Microsoft Visual Basic 6.0 Enterprise Edition and Microsoft Access 97 installed, was used. The Nutritional and Health Guide Program consisted of seven main menus and 43 sub-menus. Included in the main menu were Basic Information, Periodic Health Check-ups, Visitors' Consultations, Nutritional/Health Tips, Nutritional Education according to Diseases, Help and Exit. In the Periodic Health Check-up menu, dieticians could input the health examination data of employees and touch for the recommended treatments for diseases such as obesity, diabetes, high cholesterol, hypertension and hepatitis. The Visitors'Consultation menu has been designed to compile health information about the employees who sought consultations. The Nutritional/Health Tips menu was designed to provide 14 kinds of programmed nutritional educational media and information. In the Nutritional Education According to Diseases menu, the dietitian could judge the subject's willingness to obtain treatment based on the Stage of Change Model. According, the content of the administered respective nutritional education was classified by stages. The Help menu, provide a chart of the method and procedure used as nutritional guidelines, by which the results of the health examination were classified as people in good health and those requiring special medical attention. The results of the evaluation of this program showed highly positive rates for usefulness (4.09), convenience (4.04), lettering size (4.02), interest (3.93), design (3.49). It also showed that 97.5% of the subjects thought that this program would be helpful for implementation of their company's nutritional educational program. Therefore, this menu could help dietitians plan, conduct, and evaluate their nutritional guidelines for employees. It is expected that The Nutritional and Health Guide Program developed in this study will play a role as a scientific and effective guide in conjunction with health examination results.

• Journal of Engineering Education Research
• /
• v.24 no.6
• /
• pp.67-78
• /
• 2021

This study is an analysis of the life of Max Planck (1858-1947), the in view of engineering literacy education. Some expressions describing Planck include "the father of German science", "the namer of Quantum". Furthermore, he is the scientist who permanently engraved his name in a scientific invariant called the Planck Constant. Planck had already made remarkable scientific achievements in his mid-ages, which became the springboard of quantum mechanics, but he went on to achieve much more in his old age. Between 1910s and 1930s, he was the director of the Kaiser-Wilhelm Gesellschaft, the Berlin Academy, and the German Physics Society, which is the German core research group. In the 1910s, he endured the terrible personal suffering of losing his three children and then succeeded in rebuilding German science in the 1920s in his golden age of 70s. His achievement was great not only as a scientist but also as a science administrator. His life was contradictory in several ways. While fundamentally being a conservative, he initiated a great scientific revolution. While making efforts to preserve traditional values, he was in the center of great many upheavals and destruction. While being the incarnation of honesty, he was also given to extremely delicate political positions. In his long career, Planck lived with all his might as a leader of the German science organizations and permanently left his name on the institute representing Germany. Planck succeeded in his work for the institutional development of science, philosophical understanding of science, and as a role model of exemplary scientist. His long life was accompanied by both achievements and failures, intangible and difficult to judge. Today, as research and development management and scientific leadership have become increasingly important, Planck's life may be a good example of engineering literacy education.

• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.891-898
• /
• 2022

Purpose: There is not much time left for mandatory BIM implementation for all sectors and stages of the construction industry. Therefore, it is necessary to find a way to secure technology to substantially improve the productivity of BIM work. In the research, we proposed a method to automatically verify related construction standards for major objects produced by BIM modeling procedures so that engineers can verify construction standards in the BIM-based design process. Method: We defined a modeling work procedure for BIM-based road design work and prepared a method for constructing related design standards in a database. In addition, a process map for developing a BIM-based design basis review automation system was also presented. Result: A BIM-based design standard review automation module was developed using Civil3D and Dynamo. And it was confirmed by the test application that it is possible to quickly judge whether the BIM object manufactured in the design process conforms to the construction design standard. Conclusion: BIM-based design standard review automation technology can improve the productivity of BIM model production work and secure the quality of the BIM model.