• Journal of Oral Medicine and Pain
• /
• 제44권2호
• /
• pp.59-64
• /
• 2019

Purpose: The aim of this study was to analyse and evaluate the morphology of the articular eminence of temporomandibular joint in young Korean adults using cone-beam computed tomography (CBCT). Methods: One hundred seventy-one subjects (59 males, 112 females) in the 20s were examined using CBCT. Width and height of articular eminence, top-roof line angle, best-fit line angle, joint space were measured. For the group comparisons, independent t-test was used with the level of significance established at $p{\leq}0.05$. Results: In asymptomatic young Korean adults, average eminence width was $9.49{\pm}1.62mm$ in males and $9.33{\pm}1.36mm$ in females. Average eminence height was $7.23{\pm}1.81mm$ in males and $6.82{\pm}1.31mm$ in females. Average eminence inclination of measured by top-roof line angle was $37.09^{\circ}{\pm}7.74^{\circ}$ in males and $36.12^{\circ}{\pm}5.65^{\circ}$ in females. Average eminence inclination measured by best-fit line angle was $50.79^{\circ}{\pm}11.49^{\circ}$ in males and $48.43^{\circ}{\pm}9.05^{\circ}$ in females. Average joint space was $3.03{\pm}0.67mm$ in males and $2.63{\pm}0.68mm$ in females. Conclusions: Increasing age did not affect the morphology of the articular eminence in asymptomatic young Korean adults. Males had slightly larger eminence width, height, top-roof line angle, best-fit line angle and joint space, but no statistical significance (p>0.05) was observed only in the joint space (p=0.001). There was no side-to-side difference in morphology (p>0.05).

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.9-12
• /
• 2002

A parametric study has been conducted to investigate the effect of the geometry on the strength of an unidirectional and fabric hybrid laminated composite joint. Tests are conducted for the specimens with nine different edge-to-hole diameter or width-to-hole diameter ratios. For the finite element analysis, the characteristic length method is used, and the tests for determining the characteristic length are performed additionally. Nonlinear contact problem between the pin and laminate is modeled by the gap element in MSC/NASTRAN. Tsai-Wu failure criteria is applied to the stress on the characteristic curve. The finite element and experimental results shows good agreement in strength of composite joint. Results of the parametric study shows the effect of the geometry is remarkable in the specimens with width-to-hole diameter ratio less than 2.8 and edge-to-hole diameter ratio less than 1.4.

• 대한토목학회논문집
• /
• 제35권1호
• /
• pp.19-29
• /
• 2015

반두께 프리캐스트 콘크리트 바닥판의 적용이 증가함에 따라, 프리캐스트 구조물 간의 연결에 대한 연구가 증가하고 있다. 또한, 프리캐스트 패널을 갖는 합성바닥판에서 패널간에는 횡방향 이음부의 연속적인 거동이 요구된다. 이 논문에서는 루프이음 방식을 적용하여 교축방향 패널과 패널사이의 이음부에 구조적 연속성과 성능을 평가하였다. 실험결과로부터 바닥판의 연속성 확보를 위한 루프철근 이음부의 휨강도 및 균열제어의 연속성을 확인하였다. 실험결과 루프이음 철근 간격을 좁게 한 경우의 휨강도가 1.52배 증진되는 효과를 보였다. 또한, 루프이음부에 횡방향 철근은 균열제어에 매우 효율적임을 확인하였다.

• 한국콘텐츠학회논문지
• /
• 제15권8호
• /
• pp.556-563
• /
• 2015

본 연구의 목적은 스탠스 폭에 따른 신체의 좌우방향 이동에 대한 동작을 비교, 분석하는데 있다. 이를 위해 남자 대학생 7명(평균 신장 $174.9{\pm}4.8cm$, 평균 체중 $70.9{\pm}6.6kg$)이 실험에 참여하였다. 실험을 위해 고속카메라 9대와 지면반력기 2대가 이용되었으며, 두 가지의 스탠스 폭은 좁은 보폭(평균 42.9cm)과 넓은 보폭(평균 65cm)으로 제한하여 실시하였다. 실험을 통해 다음과 같은 결론을 얻었다. 첫째, 좁은 보폭이 양발이 착지 후 오른발이 이지하는 순간까지, 즉 추진 구간의 소요시간에서 유의하게 짧은 시간이 소요되었다. 둘째, 스플릿 스텝 후 오른발 이동 변위는 좁은 보폭이 유의하게 길게 나타났다. 셋째, 신체무게중심 속도는 오른 발 이지 시와 최대 속도에서 두 보폭 간에 유의한 차이가 나타나지 않았다. 넷째, 오른발 이지시 엉덩관절과 무릎관절의 각도는 좁은 보폭의 각도가 유의하게 더 크게 나타났다. 다섯째, 오른발 이지시 지면반력 값은 두 보폭 간에 유의한 차이가 나타나지 않았다.

• Journal of Welding and Joining
• /
• 제32권4호
• /
• pp.46-54
• /
• 2014

In this study, the effect of bonding temperature and bonding pressure on deformation and tensile properties of diffusion bonded joint of STS304 compact heat exchanger was investigated. The diffusion bonds were prepared at 700, 800 and $900^{\circ}C$ for 30, 60 and 90 min in pressure of 3, 5, and 7 MPa under high vacuum condition. The height deformation of joint decreased and the width deformation of joint increased with increasing bonding pressure at $900^{\circ}C$. The ratio of non-bonded layer and void observed in the joint decreased with increasing bonding temperature and bonding pressure. Three types of the fracture surface were observed after tensile test. The non-bonded layer was observed in diffusion bonded joint preformed at $700^{\circ}C$, the non-bonded layer and void were observed at $800^{\circ}C$. On the other hand, the ductile fracture occurred in diffusion bonded joint preformed at $900^{\circ}C$. Tensile load of joint bonded at $800^{\circ}C$ was proportional to length of bonded layer and tensile load of joint bonded at $900^{\circ}C$ was proportional to minimum width of pattern. The tensile strength of joint was same as base metal.

• 대한치과교정학회지
• /
• 제49권2호
• /
• pp.81-88
• /
• 2019

Objective: The aim was to assess the intraobserver and interobserver reliabilities of temporomandibular joint linear measurements and condylar shape classifications performed with cone-beam computed tomography (CBCT). Methods: CBCT images of 30 patients were measured at two different time points by two orthodontists using the Dolphin 3D program (n = 60). Anterior, posterior, and superior joint space measurements and sagittal joint morphology classification in the sagittal view and medial and lateral joint space and mediolateral width measurements and coronal joint morphology classification in the coronal view were recorded. Intraclass-interclass correlation coefficients (ICC) and kappa statistics were used to assess intraobserver and interobserver reliability for the measurements and morphology classifications, respectively. Results: The ICC values were good for measurements of the posterior joint space by observer I and for measurements of the posterior, medial, and lateral joint spaces by observer II, while the other intraobserver measurements were excellent. Only the mediolateral width measurements showed excellent interobserver ICC values, while the other measurements showed good interobserver ICC values. Intraobserver agreement for the sagittal morphology classifications was moderate (${\kappa}=0.479$) and almost perfect (${\kappa}=0.858$) for observers I and II, respectively, while the corresponding agreement for the coronal morphology classifications was substantial for both observers. The interobserver agreement values for sagittal and coronal morphology classifications were slight (${\kappa}=0.181$) and fair (${\kappa}=0.265$), respectively. Conclusions: Linear temporomandibular joint measurements were reproducible and reliable in both intraobserver and interobserver evaluations. However, interobserver agreement for assessments of condylar shape was low.

• 대한가정학회지
• /
• 제24권3호
• /
• pp.43-50
• /
• 1986

This study is toidentify what makes people uncomfortable when people wear new shoes and to gain fundamental data for establishing shoe sizes. Data materal from the 16 measurement investigation conducted on 796 college girl students shows the following. 1) More than 96% of the subjects have experienced footache when they wore new shoes. It is significant that 45.76% of the subjects answered shoe width, especially pump-lining part cause them to feel more pain in their feet than any other measurement elements. 2) According to multiple correlation analysis to know which parts of feet determine shoe size, both multiple correlation coefficient of feet length to other parts of foot and joint girth to other parts of foot show the highest of R=0.93. 3) According to the ANOVA-tested result of estimated function when both foot-length-joint girth and foot length-joint girth-foot width are independent variables in each case, the level of α〈0.001 is very significant. 4) The comparision between KS G3116 adult women's shoe size establishment table and my table in this study reveals that the cases of more increased joint girth measurements than standard joint girth measurements in KS G 3116 table are easy to find.

• 한국전문물리치료학회지
• /
• 제26권1호
• /
• pp.60-66
• /
• 2019

Background: Knee osteoarthritis (OA) is a single most arthritic disease. Knee joint space width (JSW) is commonly used for grading severity of knee OA. However, previous studies did not established criterion validity and test-retest reliability of ultrasound (US) image for measuring JSW. Objects: The aim of this study was to establish criterion validity and test-retest reliability of US measurement of medial and lateral knee JSW. Methods: Twenty-nine subjects with knee OA were participated. The US and X-ray were used to measure knee JSW. One sample Kolmogorov-Smirnov test was used to confirm the data normal distribution. Pearson correlation coefficient and ICC were used to calculated and establish criterion validity and test-retest reliability, respectively. Results: US measurement of medial and lateral knee JSW was highly correlated with radiographic imaging measure (r=.714 and .704, respectively). Test-retest reliabilities of medial and lateral knee JSW were excellent correlated (ICC=.959 for medial side and .988 for lateral side, respectively). Conclusion: US may be valid tool to measure knee JSW.

• 한국강구조학회 논문집
• /
• 제14권2호
• /
• pp.311-318
• /
• 2002

본 논문은 냉간성형 각형강관 T형 접합부의 최대내력과 변형제한치에 대한 연구이다. 전회의 실험적 연구로부터, T형 접합부는 주관폭에 대한 지관폭의 비(${\beta}$) 0.8이하의 범위에서 변형의 증가와 함께 내력이 계속적으로 증가하는 양상을 나타내었다. 따라서, 일정한 변형량(주관플랜지에서의 변위)에 대응하는 하중을 T형 접합부의 최대내력으로 정의할 수 있을 것이다. 폭비(${\beta}$)와 주관 두께에 대한 폭의 비(B/T)가 주관 플랜지 파괴모드에 미치는 영향을 검토하였다. 기존의 Kato에 의해 수행된 실험을 포함한 실험결과로부터 $16.7{\leq}B/T{\leq}41.6$ 이고 $0.27{\leq}{\beta}{\leq}0.8$ 인 범위의 T형 접합부에 대하여, 최대내력을 정의를 위한 변형제한치는 주관폭의 3% 변형량(3%B)으로 제안하였다. CIDECT의 설계식 및 기존의 제안내력식과 실험결과를 비교하였고, 최종적으로 항복선이론에 근거한 내력식을 제안하였다.

• Clinics in Shoulder and Elbow
• /
• 제24권2호
• /
• pp.66-71
• /
• 2021

Background: Extra-articular distal humerus locking plates (EADHPs) are precontoured anatomical plates widely used to repair distal humeral extra-articular diaphyseal fractures. However, EADHPs frequently cause distal protrusion and resulting skin discomfort. The purpose of this study was to predict the occurrence of anatomic fit mismatch. We hypothesized that the smaller the humerus size, the greater the anatomic fit mismatch with EADHP. Methods: Twenty humeri were analyzed in this study. Humeral length and distal humeral width were used as parameters of humeral size. Plate protrusion was measured between the EADHP distal tip and the distal humerus. We set the level of unacceptable EADHP anatomic fit mismatch as ≥10 mm plate protrusion. Results: A significant negative linear correlation was also confirmed between humeral size and plate protrusion, with a coefficient of determination of 0.477 for humeral length and 0.814 for distal humeral width. The cutoff value of humeral length to avoid ≥10 mm plate protrusion was 293.6 mm (sensitivity, 88.9%; specificity, 81.8%) and for distal humeral width was 60.5 mm (sensitivity, 100%; specificity, 81.8%). Conclusions: Anatomic fit mismatch in distal humeral fractures after EADHP fixation has a negative linear correlation with humeral length and distal humeral width. For patients with a distal humeral width <60.5 mm, ≥10 mm plate protrusion will occur when an EADHP is used, and an alternative implant or approach should be considered.