• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.1976-1985
• /
• 2015

The amount of packets in palyout buffer of video streaming receiver can be changed by network condition, and saturated and exhausted by the delay and jitter. Especially, if the amount of incoming video traffic exceeds the maximum allowed playout buffer, buffer overflow problem can be generated. It makes the deterioration of video image and the discontinuity of playout by skip phenomenon. Also, if the incoming packets are delayed by network confusion, the stop phenomenon of video image is made by buffering due to buffer underflow problem. To solve these problems, this paper proposes the video streaming receiver with token bucket scheme which automatically establishes the important parameters like token generation rate r and bucket maximum capacity c adapting to the pattern of video packets. The simulation results using network simulator-2 (NS-2) and joint scalable video model (JSVM) show that the proposed token bucket scheme with automatic establishment parameter provides better performance than the existing token bucket scheme with manual establishment parameter in terms of the generation number of overflow and underflow, packer loss rate, and peak signal to noise ratio (PSNR) in three test video sequences.

• Journal of Oral Medicine and Pain
• /
• v.23 no.3
• /
• pp.289-294
• /
• 1998

본 증례는 측두하악관절의 퇘행성 변화를 보이는 환자에서 악교정 수술의 시행 전에 중심위교합장치를 통해 측두하악관절의 안정화를 유도하고, 또한 골스캔을 이용하여 장치의 치료효과를 평가한 임상증례이다. 환자는 24세의 여성으로 5년 전부터 전치부 개교합이 발생되기 시작하였고, 고형식 저작시 좌측 전이부에 간헐적인 통증이 발생한다는 주소로 본원에 내원하였다. 임상검사상 촉진시 양측 관절낭 후방부에 압통을 호소하였으며, 각각 50, 45mm의 최대개구량 및 최대무통성 개구량을 보였다. 좌측 악관절부에서 단순 관절 잡음, 우측 악관절부에서 염발음이 청취되었으며, 저항검사 및 부하 검사에서는 특기할 반응을 보이지 않았다. 약 7mm의 전치부 개교합의 소견을 보였으며, 파노라마 사진과 횡두개 방사선 사진 소견상 양측 과두의 크기 및 하악지의 높이가 다소 작은 소견이 관찰되었고 자기공명영상 소견상 양측성 비정복성 관절원판의 전방전위가 관찰되었다. 1997년 10월 27일 첫 번째 골스캔 소견상 양측성 비정복성 관절원판의 전방위가 관찰되엇다. 골스캔의 전방 사진에서 Densitometer를 이용하여 좌, 우측 과두부위와 상악 골부위의 가장 어두운 부분의 흑화도를 측정하였다. 각각 3회씩 구하여 평균을 구하고 좌, 우측 과두 대 상악골의 흑화도의 비율을 계산하였다. 첫번째 골스캔의 평균 흑화도는 우측 과두, 좌측과두, 상악골이 각각 0.88, 0.81, 1.32 였다. 1997년 11월 4일 중심위교합장치를 장착하였고 지속적인 물리치료를 시행하였다. 1997년 12월 10일 두 번째 골 스캔을 평균 흑화도는 우측 과두, 좌측 과두, 상악골이 각각 0.33, 0.37, 088 이었다. 1998년 1월 30일 세 번째 골스캔 소견상 두 번째 골스캔과 비교하여 활성도가 감소된 소견을 보였다. 임상검사시 무통이었다. 1998년 2월 25일 술 전 교정 위해 중심위교합장치의 장작을 중지시켰다. 1998년 6월 5일 네 번째 골스캔 소견상 이전 검사들과 비교시 흡수가 감소된 소견을 보였다. 네 번째 골스캔의 평균 흑화도는 우측 과두, 좌측 과두, 상악골이 각각 0.24, 0.19, 0.85 였다. 현재 지속적인 관찰 중이며 본원 교정과에서 악교정수술 위한 술 전 교장을 시행중이다. 결국 첫 번째 골스캔의 과두 대 상악골의 평균 흑화도의 비율은 우측과 좌측이 각각 0.66, 0.61이었고 두 번째 골스캔에서는 우측과 좌측이 각각 0.37, 0.42였고, 네번째 골스캔에서는 우측과 좌측이 각각 0.28, 0.23 이었다. 각 골스캔의 과두 대 상악골의 평균 흑화도의 비율 사이에 유의한 차이가 있는지 검증하기 위해 Standard t-test 와 ANOVA를 시행하였다. 이상의 결과에서 첫 번째, 두 번째, 네 번째 골스캔으로 갈수록 좌, 우측 과두 대 상악골의 흑화도의 비율이 유의하게 감소했음을 알 수 있었다. 결론적으로 본 증례에서는 전치부 개교합이 발생되어 악교정수술이 필요한 환자에게 측두하악관절의 안정화를 위해 중심위교합장치를 사용함으로써 퇴행성 관절질환의 진행을 억제시킬 수 있고, 퇴행성 관절질환의 활성도에 대한 평가시 골스캔이 유용할 수 있음을 보여주었다고 사료된다.

• Journal of muscle and joint health
• /
• v.4 no.1
• /
• pp.48-60
• /
• 1997

This study was undertaken to identify the musculotendinous problems and contributing factors to those problems In students majoring in musical instruments in Korea. The data were collected from March 2, 1996 to March 31, 1996 from 261 music students in various geographical areas. The data were analyzed for descriptive statistics, t-test, chi-square using SPSS $PC^+$ program. The results of this study were as follows : 1. In a questionnaire survey of 261 music students, one hundred twenty five(47.9%) reported having had various musculotendinous symptoms. Twenty seven students among the those who had previous symptoms(21.9%) reported the present symptoms. 2. The experience rates of musculotendinous problems in keyboard players, string players and woodwind players were 50.3%, 48.2%, 33.3% respectively. 3. Most of the students practiced most intensively during their high school years and the musculotendinous symptoms began at the same period. 4. Pain, tenderness and stiffness were the most common symptoms, while paresthesia and motor dysfunction were rare. This indicates that most players had muscle tendinous overuse, while small number had nerve entrapment and motor dysfunction. 5. In past and present symptoms, string players experienced musculotendinous symptoms mainly in both sides of shoulders, lumbar area, left finger, and left wrist, while keyboard players experienced more symptoms in the right wrist, shoulder, fingers than left side. 6. The major contributing factors to the symptoms were weight of instrument, types of instruments, types of daily activities, duration of practice, and playing technique. 7 The most frequent treatment modalities for the symptoms were acupuncture or moxibustion, other alternative therapy such as heat compress and massage. Through this study it was found that the musculotendinous problems might be increased along with their career, due to lack of knowledge about preventive measures and patterns of health behavior seeking alternative modalities rather than professional consultation. Therefore, preventive measures that focus on playing habits such as duration of practice, frequency of rest and position while playing should be developed and taught to the students, their parents, and music educators. Doctors who are interested in this area should attempt to correct the position and posture while playing of the posture. And measures for reduction of loading of instrument weight should also be developed.

• Journal of Korean Physical Therapy Science
• /
• v.19 no.3
• /
• pp.49-56
• /
• 2012

Background : The purpose of this study is to understand the effects of ankle joint taping on balancing abilities of the elderly and to provide preliminary data on preventing falls among the elderly. Methods : In this study, 20 students(8 male, 12 female) in their 20s from D University as well as 14 elderly(4 male, 10 female) in their 70s from S community center have participated. The participants were well informed about the experiment and voluntarily participated. We measured the difference in balancing ability before and after taping between the two groups using methods such as standing on single-leg stance, TUG, and plantar pressure. Kinesio taping, a stop-watch, and the EMED-system were used as equipment along with the SPSS 12.0 program, with a significance level of 0.05, to test the difference before and after taping between the two groups. Result : First, the 70s group showed a significant increase in the dorsal flexion angle after taping. Second, the 70s group showed a significant increase in duration time of standing on one foot after taping. Third, the 70s group's TUG time was significantly shorter. Fourth, the maximum peak value for static and dynamic plantar pressure showed a significant decrease after taping; and dynamic plantar pressure area value decreased as well within significant range. Conclusion : The study has shown that taping is effective on static dynamic balancing ability of the elderly.

• Clinics in Shoulder and Elbow
• /
• v.12 no.2
• /
• pp.109-114
• /
• 2009

Purpose: This study evaluated the preoperative and postoperative radiologic findings of patients with complete repairs after massive rotator cuff tears along with the incidence of re-tear and the clinical outcomes. Materials and methods: This study evaluated 33 cases who had open complete repairs for massive rotator cuff tears and these patients were followed up for more than 24 months. The clinical evaluation was performed according to the shoulder joint function test of the American Shoulder and Elbow Surgeons (ASES), and the degree of arthritis related to the massive rotator cuff tears was evaluated using the Hamada classification. Results: The ASES scores improved from 37.6 preoperatively to 85.6 postoperatively. The mean preoperative acromio-humeral interval (AHI) score was 6.5 mm, which increased to 9.3 mm immediately after surgery, and there was a decreased to 6.5 mm noted at the last follow up. The lower radiology stages of arthritis according to the classification showed better preoperative and postoperative results. Conclusion: An open complete repair as the surgical treatment for a massive rotator cuff tear showed satisfactory results for pain relief and an improvement in the shoulder joint function though re-tear after surgery.

• Journal of Biomedical Engineering Research
• /
• v.29 no.1
• /
• pp.32-39
• /
• 2008

This paper reports on a realtime OS based master-slave configuration robot control system for laparoscopic surgery robot which enables telesurgery and overcomes shortcomings with conventional laparoscopic surgery. Surgery robot system requires control system that can process large volume information such as medical image data and video signal from endoscope in real-time manner, as well as precisely control the robot with high reliability. To meet the complex requirements, the use of high-level real-time OS (Operating System) in surgery robot controller is a must, which is as common as in many of modem robot controllers that adopt real-time OS as a base system software on which specific functional modules are implemened for more reliable and stable system. The control system consists of joint controllers, host controllers, and user interface units. The robot features a compact slave robot with 5 DOF (Degree-Of-Freedom) expanding the workspace of each tool and increasing the number of tools operating simultaneously. Each master, slave and Gill (Graphical User Interface) host runs a dedicated RTOS (Real-time OS), RTLinux-Pro (FSMLabs Inc., U.S.A.) on which functional modules such as motion control, communication, video signal integration and etc, are implemented, and all the hosts are in a gigabit Ethernet network for inter-host communication. Each master and slave controller set has a dedicated CAN (Controller Area Network) channel for control and monitoring signal communication with the joint controllers. Total 4 pairs of the master/slave manipulators as current are controlled by one host controller. The system showed satisfactory performance in both position control precision and master-slave motion synchronization in both bench test and animal experiment, and is now under further development for better safety and control fidelity for clinically applicable prototype.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.85-92
• /
• 2008

Strength of logs and round posts is compared and analyzed to estimate the strength of the incised Larix round posts treated with CCA in this paper. There is no significant difference in MOR of logs and round posts. However, in the incised Larix round posts treated with CCA MOE is decreased to about 9%, and there is 29% reduction in MOR as strength ratio is 0.71. When calculating the allowable bending stress of incised round type round posts, not in nominal 2-in timbers, an adjustment factor for MOE and bending strength is proposed as 0.91 and 0.71, respectively. Logs, round posts and the incised Larix round posts treated with CCA do not show significant difference in nail withdrawal load. There is almost no difference between incised Larix round posts treated with CCA and round posts in the shear strength of bolted joint. When calculating the allowable shear stress of bolted joint, it is conformed that considering the application of incising factor is not necessary.

• Journal of muscle and joint health
• /
• v.3 no.1
• /
• pp.63-89
• /
• 1996

This study has been done for the purpose of determining whether the positive association between social support and depression is attributable to an overall beneficial effect of support(direct effect) or to a process of support protecting persons from adverse effects of stressors such as life events, pain or physical disability (buffering effect). The sample consisted of 214 patients who were identified as the rheumatoid arthritis. The instruments used in this study were Depression Scale(CES-D), Perceived Social Support Scale, Life Events Questionnaire, AIMS Pain Scale, and Physical Disability Scale. The data were analysed by the use of t-test, ANOVA, Pearson Correlation Coefficient and Stepwise Multiple Regression. The results of this study are summerized as follows : 1. The 1st hypothesis, "The higher the life events degree, the higher the depression degree" was supported(r=.49, P=.0001). 2. The 2nd hypothesis, "The higher the pain degree, the higher the depression degree" was supported(r=.44, P=.0001). 3. The 3rd hypothesis, "The higher the physical disability degree, the higher the depression degree" was supported (r=.46, P=.0001). 4. The 4th hypothesis, "The higher the social support degree, the lower the depression degree" was supported(F=84.52, P=.0001). 5. The 5th hypothesis, "There will be different in the relationship between the degrees of life events and depression according to social support degree" was rejected (F=.29, P=.5928). 6. The 6th hypothesis, "There will be different in the relationship between the degrees of pain and depression according to social support degree" was supported (F=3.19, P=.0755). 7. The 7th hypothesis, "There will be different in the relationship between the degrees of physical disability and depression according to social support degree" was supported(F=5.69, P=.018). 8. The predictive variables for depression were the degrees for social support, life events, pain, and physical disability. 9. The depression degree showed a inverse correlation with social support degree (r=-.56, p=.0001). The social support degree showed a inverse correlation with the degrees of life events(r=-.22, p=.0007), pain(r=-.18, p=.0069) and physical disability(r=-.15, p=.0293). 10. The depression degree showed significant differences in the variables of sex (t=2.26, p=.025), educational level(r=.189, P=.006) and the number of treatment method (r=.201, P=.003). In conclusion, it was found that social support had the direct effect on depression and the buffering effect in each relationship between degrees of pain or physical disability and depression in patients with rheumatoid arthritis. So the researcher thinks that it is effective that nurses should provide these patients with social support to reduce depression in cases of having severe pain or physical disability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.140-148
• /
• 2019

Large cast iron structures are used in casings and pipes in shipsand chemical plants. Broken parts in the casings and pipescan result in failures even when stresses are below the yield strength of the part's materials. Fatigue failure of a large cast iron structure is inevitable due to the design constraints and low reliability of the material strength. A small structure can be repaired by welding, but a large structure cannot because it cannot be preheated slowly and uniformly. This study shows that a large structure can be repaired by a cold joint method using a crack repair screw. Large cast iron structures were manufactured by GC 300, and their design stress is below 3.5 MPa. The tensile strength on notched specimens repaired by crack repair screws was 8.2 MPa. Therefore, the safety factors of structures repaired by crack repair screws have a value above 2.3 and are considered to be high values.

• Journal of the Korea Society for Simulation
• /
• v.26 no.3
• /
• pp.115-123
• /
• 2017

Dispite the fact that our military has outwardly made notable accomplishments such as the development of weapon systems like tanks, self-propelled artillery, and missiles, there has been a lack of attention to producing weapon effectiveness data that suggests a standard as to what effects the developed weapons will demonstrate on the battlefield. For such reasons, most of the weapon effectiveness data utilizes JMEM data introduced by the United States and as for the rest of the data that cannot be acquired, respective branches create and utilize their own data through research. This research aims to develop a reliable methodology that can meet the requirements of the requesting branches in a short span of time and at a low cost by studying the existing weapon effectiveness data production methodologies such as that of JMEM. As a result I have developed a method that calculates the vulnerable area and the probability of kill of the weapon system that one wants to calculate by applying statistical technique and simulation technique based on weapon effectiveness data of similar weapon systems in JMEM and live test data.