• Tribology and Lubricants
• /
• v.26 no.1
• /
• pp.44-51
• /
• 2010

A miniature shear testing machine was designed and developed, adopting a piezoelectric actuator with mechanical advantage using 4 levers in order to investigate shear behavior of a small solder ball. The final output displacement was initially expected to be 2.88 mm without load resistance, considering the lever ratio of 24 and the piezo displacement of 0.12 mm with an exciting voltage of 10 V. However, the final plunger displacement ${\Delta}{\upsilon}$ can be expected as ${\Delta}{\upsilon}=2.88-3.04{\times}10^{-4}F$ as a function of piezoelectric force F due to the stiffness of various levers and connectors and piezo actuator. The shear behavior of lead-free solder ball in diameter of $760{\mu}m$ was successfully investigated in a speed range of 2 mm/s~0.0035 mm/s using this designed device.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.658-661
• /
• 2007

KIER have been developing high-temperature solar technology, especially the solar thermal power generation system, since the early of 1990s. In 1994, the first research on high temperature solar technology started with PTC technology. At the moment the most advanced 10kW dish system is under demonstration for 10kW solar thermal power generation. Test results showed about 19.2% solar to electricity average efficiency. Another research activities of KIER is hybrid power generation. For hybridization, solar and LFG(landfill gas) are used. Another hybrid solar system is with solar chemical reaction. In this system, power unit is gas turbine, and the heat content of fuel(like natual gas) is upgraded by solar energy through chemical reaction. The latest project on solar thermal power generation is for 1 MW power tower system. This is the Korea-China Joint project.

• Korean Journal of Plant Resources
• /
• v.23 no.6
• /
• pp.550-553
• /
• 2010

The representative research institutes in North Korea are the Academy of Science and the laboratories of major universities. The National Academy of Science consists of headquarters, Academy of Medicinal Science, Academy of Forestry Science, and Academy of Agricultural Science. Under the authority of the National Academy of Science, Central Information Agency for Science and Technology (CIAST) has built up a database system integrating all the science technology data to provide scientific and technological information. The major universities of North Korea include Kim Il-sung University, Kim Chaek University of Technology, Pyongyang Agricultural College, and Wonsan Agricultural College, and an agricultural college is situated in each province. Out of 3,860 plant species in North Korea, 158 species which amounts to approximately 4% of the total are rare and endangered, and deforestation is under a critical situation. The Oriental Medicine (Koryo Medicine) has been well developed using medicinal plants, and practical researches on biotic pesticide are largely conducted as an alternative to tackle the shortage of farming materials. Hereafter, a South-North joint research on the amount of plant resources and the methods of its conservation is needed and the North Korean research areas of biotic pesticide are worth adopting to the South Korean eco-friendly organic agriculture.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.1
• /
• pp.35-44
• /
• 2012

Many automobile manufacturers are doing experiment on manufacturing environments by using an augmented reality technology. However, system layout and process simulation by using the virtual reality technology have been performed actively more than by using the augmented reality technology in practical use so far. Existing automobile assembly by using the augmented reality requires the precise calibrating work after setting the robot because the existing augmented reality system for the automobile assembly system configuration does not include the end tip deflection and the robot joints deflection due to the heavy weight of product and gripper. Because the robot is used mostly at the automobile assembly, the deflection problem of the robot joint and the product in the existing augmented reality system need to be improved. Moreover camera lens calibration has to be performed precisely to use augmented reality. In order to improve this problem, this paper introduces a method of the software based calibration to apply the augmented reality effectively to the automobile assembly system. On the other hand, the camera lens calibration module and the direct compensation module of the virtual object displacement for the augmented reality were designed and implemented. Furthermore, the developed automobile assembly system oriented AR-system was verified by the practical test.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2003.11a
• /
• pp.345-357
• /
• 2003

The paper discusses a novel educational initiative in e-commerce pedagogy where students work on an e-government project. The paper describes a two-semester joint e-government project conducted by the town of Amherst, NY, and the State University of New York at Buffalo. During the first semester, students in a graduate e-commerce course in the School of Management were instructed to identify and analyze management issues valuable for small or middle size local government. In the second semster graduate students from the Department of Computer Science and Engineering designed and implemented prototypes of three e-government portals: an on-line action site for governmental procurement (E-Procurement), a portal for reservation of community recreation facilities (E-Recreation), and a portal for online dog registration (E-DogRegistration) combining a central registry of dog owners with distributed veterinarian databases. The objective of this initiative is twofold. First, it saves the local government resources by eliminating duplication of services and by using students as developers. Second, it provides students with real life hands-on experience. The paper discusses both the technical issues involved in the implementation of the project, and the management issues that need to be taken into account to enhance the e-commerce experience for the ordinary citizen and local governments.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.13 no.2
• /
• pp.51-55
• /
• 2006

Since 1970, China has become the biggest cocoon producer in the world, and made the highest historical record of cocoon output for 759,800 tons in 1995. However, in 1996 cocoon production reduced sharply to 470,900 tons. After a ten-year adjustment and reform, sericultural areas have shifted from developed regions to developing regions and from the east to the west. From 2000, the cocoon output has started to increase restoringly. By 2004 it recovered to 547,091 tons. With the development of market economy, sericulture management has been changed, including mulberry fields concentrated to the specializated households and cooperatives, cocoons produced in larger scale instead of individuals, Silkworm egg producing enterprises gradually changed into non-governmental joint-stock ones. The mechanism of market cocoon price has been gradually established. The management model of combination of trade, industry and agriculture is pushing and improving. It is the fruit of modern science and technology, especially sericultural basic research, that provides China's sericulture with the opportunity and vital force. China's sericulture, therefore, will continue to develop steadily in future.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.607-615
• /
• 2019

In this paper, the electromagnetic effects on the discontinuity structures of the frequency selective radome in manufacturing process based on the X-band were analyzed. In order to fabricate a curved radome using a planar frequency selective surface structure, it is assumed that gaps, slanted gaps, pattern damage, and pattern misalignment between FSS patterns, which are discontinuous elements that can occur at the joint surface of the FSS panel. FSS specimens including continuous elements were fabricated and the frequency transmission characteristics were measured in a free space measurement environment. From the measurement results, resonance frequency shift, transmission performance degradation, and bandwidth variations were found to be the largest when the damaged pattern was bonded to the junction of FSS panels.

• Journal of Climate Change Research
• /
• v.7 no.2
• /
• pp.177-184
• /
• 2016

Recently, the need for technology development of commercial vehicle fuel consumption has emerged. Fuel economy improvement of transport equipment and transportation efficiency, and increasing attention to the logistics cost reduction measures. Increasing attention to the logistics cost reduction measures by fuel economy improvement of transport equipment and transportation efficiency. In this study, we have installed aerodynamic reduction device (side skirt, boat tail) to 14.5 ton cargo trucks and 45 ft tractor-trailers. And the fuel consumption was compared installed before and after. Fuel economy assessment for the aerodynamic reduction value device was tested by modifying the SAE J1321 Joint TMC/SAE Fuel Consumption Test Procedure - Type II test in according domestic situation. Greenhouse gas reductions were calculated in accordance with the scenario, including fuel consumption test results. When the 14.5 ton cargo trucks has been equipped with side skirts and boat tail, it confirmed the improvement in fuel efficiency of 4.72%. One Heavy-duty truck's the annual greenhouse gas reductions value are $6.86ton\;CO_2\;eq$. And if applying the technology to more than 50% of registered 15 ton trucks, greenhouse gas reductions are calculated as $686,826ton\;CO_2\;eq./yr$.

• Journal of Information Processing Systems
• /
• v.17 no.3
• /
• pp.615-629
• /
• 2021

With the development of mobile edge computing, how to utilize the computing power of edge computing to effectively and efficiently offload data and to compute offloading is of great research value. This paper studies the computation offloading problem of multi-user and multi-server in mobile edge computing. Firstly, in order to minimize system energy consumption, the problem is modeled by considering the joint optimization of the offloading strategy and the wireless and computing resource allocation in a multi-user and multi-server scenario. Additionally, this paper explores the computation offloading scheme to optimize the overall cost. As the centralized optimization method is an NP problem, the game method is used to achieve effective computation offloading in a distributed manner. The decision problem of distributed computation offloading between the mobile equipment is modeled as a multi-user computation offloading game. There is a Nash equilibrium in this game, and it can be achieved by a limited number of iterations. Then, we propose a distributed computation offloading algorithm, which first calculates offloading weights, and then distributedly iterates by the time slot to update the computation offloading decision. Finally, the algorithm is verified by simulation experiments. Simulation results show that our proposed algorithm can achieve the balance by a limited number of iterations. At the same time, the algorithm outperforms several other advanced computation offloading algorithms in terms of the number of users and overall overheads for beneficial decision-making.

• Journal of Distribution Science
• /
• v.12 no.4
• /
• pp.65-72
• /
• 2014

Purpose - Because of the emphasis on the necessity of academic-industrial cooperation between companies and universities, there are various ongoing academic-industrial cooperation programs led by the government. As government actively supports such cooperation as policy,and universities vitalize new technology development, academic-industrial cooperation between companies and universities is being recognized as an important growth engine for companies the competitiveness of academic-industrial cooperation is also attracting more interest. The government has vitalized human resource fostering, practical R&D, and technology transfer to companies since 2012 by executing a "leading university fostering project for academic-industrial cooperation." Based on an organic interlink among universities, industry, and research institutes, the government also created and is promoting several models of such cooperation between companies and universities to support shared growth of industry and local universities. The purpose of academic-industrial cooperation is growth and benefit fromtechnology development, technical cooperation, and technology transfer between companies and universities. Research design, data, and methodology - As more academic-industrial cooperation efforts are ledby companies due to the limitation in technology-focused commercialization cooperation, the academic-industrial cooperation system became fragmented and it is losing the potential for future advancement. Specifically, as differences between universities grow, academic-industrial cooperation between companies and universities based on new technology from universities is finding difficulty advancing,while systematic support from companies to enhance the performance of businesses created by academic-industrial cooperation is also insufficient. Accordingly, this study established a growth model for the advancement of academic-industrial cooperation between companies and universities and suggested a plan to strengthen the competitiveness and promote the future advancementof academic-industrial cooperation between companies and universities by analyzing the current situation of such cooperation and diagnosing its issues. Results - This study explored the concept and current status of academic-industrial cooperation relationships and analyzed related issues. For such cooperative organizations to be competitive, the employment environment of professional human resources for academic-industrial cooperation should be improved and measures to secure professional resources should be taken as early as possible. Though the academic-industrial cooperation now is being led by government, there is a limitation based on business models, which require creation of profit; however, an academic-industrial cooperation model still cannot stand alone without the support of government. This study also pointed out that a having only a plan to build competitiveness of companies and universities for academic-industrial cooperation is not sufficient. Conclusions - In order to increase the competitiveness of academic-industrial cooperation, a detailed growth-sharing model for academic-industrial cooperation should be developed, and there should be more joint development processes for the advancement of such cooperation in which the need for technology development can be verified in advance. In addition, beyond focusing on technology-focused academic-industrial cooperation, a network between companies and universities searching for ideas for academic-industrial cooperation in the fields of human and social aspects should be created. A new academic-industrial model linking current cooperation between companies and universities to the local area should be built based on such academic-industrial cooperation in human and social fields.