• Journal of Welding and Joining
• /
• v.30 no.6
• /
• pp.120-125
• /
• 2012

Because ships and offshore structures have very large dimensions and complicated shapes, it is difficult to determine the deformation or internal stress in the structure by simple lab tests. Thus, a rigorous analysis by using the computer simulation technology is essential for obtaining their distortions by considering the entire production process characteristics. The rapid development of computer technology made it possible to analyze the heat transfer phenomena, deformation and phase transformation in the welded joint. For large shell structures, shell elements modeling contributed primarily to this development. But if a welding is done by multi-pass, shell elements whose thickness are unchangeable can hard to describe the local situation. Recently, it was researched how to introduce the imaginary temperature for V grooved multi-layer butt welding in strain-boundary method (a kind of shrinkage methodologies). In the present study, we formulated the imaginary temperature for the double bevel and double V groove by considering the thickness change of each pass through the bead and the thickness directions simultaneously and also demonstrated the feasibility of the formula by applying it to the thermal distortion analysis of the erection process of crane pedestal.

• Korean Journal of Agricultural Science
• /
• v.40 no.4
• /
• pp.385-394
• /
• 2013

Short-term agricultural machinery rental system has been operated by agricultural extension organization of local government (agricultural technology center) and sponsored by Ministry of Agriculture, Food, and Rural Affairs, to improve utilization efficiency and save agricultural production cost through joint utilization of agricultural machinery. This study was conducted to analyze current status of the rental system operation and provide recommendations for future direction. Question survey was conducted for officers in charge of the rental system in the technology center, and strategic improvement was suggested through importance performance analysis (IPA). Survey results showed that 11 issues should be reformed or improved by 2015, which is not practically feasible. IPA analysis resulted that administration and manpower support, cooperation between federal and local organizations, and cooperation with other organizations should be focused for successful operation of the rental system. Issues that seem to happen after 2015 need to be handled as future research.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.642-651
• /
• 2009

The history of excavator design is not long enough which still causes most of the design considerations to be focused on static analysis or simple functional improvement based on static analysis. However, the real forces experiencing on each component of excavator are highly transient and impulsive. Therefore, the prediction and the evaluation of the movement of the excavator by dynamic load in the early design stage through the dynamic transient analysis of the excavator and ensuring of design technique plays an importance role to reduce development-cost, shorten product-deliver, decrease vehicle-weight and optimize the system design. In this paper, Commercial software DADS and ANSYS help to develop the track model of the crawler type excavator, and to evaluate the performance and the dynamic characteristics of excavator with various simulations. For that reason, the track of crawler type excavator is modelled with DADS Track Vehicle Superelement, and the reaction forces on the track rollers were predicted through the driving simulation. Also, the upper frame and cabin vibration characteristics, at the low RPM idle state, were evaluated with engine rigid body modelling. And flexibility body effects were considered to determine the more accurate joint reaction forces and accelerations under the upper frame swing motion.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.4
• /
• pp.500-505
• /
• 2007

Current humanoid robot technology has a problem of lacking opened methodology about mechanisms of analysis, design, implementation, and integration for robot development but is focused only on manufacture robot and implementation of technology. In this paper, to overcome problems of humanoid robots that have been shown since and for construction of new structure which satisfy the concept of opening, networking, and modularization that is the development direction of future robot, we proposed morphological and neurological model of human arm and design method of humanoid robot arm based on the each joint design and kinematics model.

• International Journal of Knowledge Content Development & Technology
• /
• v.9 no.3
• /
• pp.43-61
• /
• 2019

The purpose of the study is to investigate the influence of demographic factors (age and job status), level of ICT skills possessed by respondents and ICT use on task performances of library personnel. The study employed correlation design. Thirteen public universities were purposely selected while total enumeration was adopted to study 248 library personnel made up of librarians and library officers in public university libraries in South-west, Nigeria. Data was collected by questionnaire. The study established significant positive correlation between age, job status, ICT skills and task performance. Also, Anova test found significant joint influence of age, job status, ICT skills and ICT use on task performances of respondents. The study further indicated that age, job status, ICT skills possessed by respondents and ICT use had relative significant influence on task performances of respondents. It is therefore recommended that, library personnel must leverage their demographics positively to bring about positive disposition to their jobs while all categories of staff must ensure they possessed the requisite ICT skills that will ginger ICT use for effective task performance.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.997-1007
• /
• 2021

The last decade has seen the emergence of the idea of "sharing economy" as people are more aware of environmental issues. Although clothing businesses applying the model of sharing consumption have emerged recently, less research effort has been invested in this topic, especially in investigating young consumers' intention. The purpose of this study is to investigate factors driving Generation Z consumers' behavioral intention toward online fashion rental. In this research, a conceptual framework is proposed based on the Theory of Planned Behavior and Technology Acceptance Model. To test the research model and hypotheses, a survey of 375 students and pupils was conducted in Vietnam. All the scales' reliability and validity were assessed through Cronbach's Alpha and confirmatory factor analysis. Structural equation modeling was used to assess the relationship among constructs. The study results showed that attitude toward behavior, subjective norm and perceived behavioral control were positive contributors to Gen Z's intention to use online fashion rental. Besides, the positive relationships between attitude and two other factors - perceived usefulness and perceived ease of use - were also highlighted. Moreover, the findings provided empirical evidence for supporting the positive impact of interpersonal influence, e-WOM, and influencer e-marketing on subjective norm.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.8
• /
• pp.891-898
• /
• 2005

Inertia welding is a solid-state welding process in which butt welds in materials are made in bar and in ring form at the joint race, and energy required lot welding is obtained from a rotating flywheel. The stored energy is converted to frictional heat at the interface under axial load. The quality of the welded joint depends on many parameters, including axial force, initial revolution speed and energy amount of upset. working time, and residual stresses in the joint. Inertia welding was conducted to make the large exhaust valve spindle for low speed marine diesel engine. superalloy Nimonic 80A for valve head of 540mm and high alloy SNCrW for valve stem of 115mm. Due to different material characteristics such as, thermal conductivity and flow stress. on the two sides of the weld interface, modeling is crucial in determining the optimal weld geometry and Parameters. FE simulation was performed by the commercial code DEFORM-2D. A good agreement between the Predicted and actual welded shape is observed. It is expected that modeling will significantly reduce the number of experimental trials needed to determine the weld parameters. especially for welds for which are very expensive materials or large shaft. Many kinds of tests, including macro and microstructure observation, chemical composition tensile , hardness and fatigue test , are conducted to evaluate the qualify of welded joints. Based on the results of the tests it can be concluded that the inertia welding joints of the superalloy exhaust valve spindle are better properties than the material specification of SNCrW.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.6
• /
• pp.585-592
• /
• 2014

In this study, a multibody simulator was developed to analyze the bio-mimetic motion of a lizard robot design. A RecurDyn multibody dynamics model of a lizard was created using a micro-computerized tomography scan and motion capture data. The bio-mimetic motion simulator consisted of a trajectory generator, an inverse kinematics module, and an inverse dynamics module, which were used for various walking motion analyses of the developed lizard model. The trajectory generation module produces spinal movements and gait trajectories based on the lizard's speed. Using the joint angle history from an inverse kinematic analysis, an inverse dynamic analysis can be carried out, and the required joint torques can be obtained for the lizard robot design. In order to investigate the effectiveness of the developed simulator, the required joint torques of the model were calculated using the simulator.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.619-628
• /
• 2011

Normally vision-based 3D human pose recognition technology is used to method for convey human gesture in HCI(Human-Computer Interaction). 2D pose model based recognition method recognizes simple 2D human pose in particular environment. On the other hand, 3D pose model which describes 3D human body skeletal structure can recognize more complex 3D pose than 2D pose model in because it can use joint angle and shape information of body part. In this paper, we describe a development of interactive game contents using pose recognition interface that using 3D human body joint information. Our system was proposed for the purpose that users can control the game contents with body motion without any additional equipment. Poses are recognized comparing current input pose and predefined pose template which is consist of 14 human body joint 3D information. We implement the game contents with the our pose recognition system and make sure about the efficiency of our proposed system. In the future, we will improve the system that can be recognized poses in various environments robustly.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.1 s.34
• /
• pp.9-16
• /
• 2005

This paper presents the development of new anisotropic conductive adhesives with enhanced thermal conductivity for the wide use of adhesive flip chip technology with improved reliability under high current density condition. The continuing downscaling of structural profiles and increase in inter-connection density in flip chip packaging using ACAs has given rise to reliability problem under high current density. In detail, as the bump size is reduced, the current density through bump is also increased. This increased current density also causes new failure mechanism such as interface degradation due to inter-metallic compound formation and adhesive swelling due to high current stressing, especially in high current density interconnection, in which high junction temperature enhances such failure mechanism. Therefore, it is necessary for the ACA to become thermal transfer medium to improve the lifetime of ACA flip chip joint under high current stressing condition. We developed thermally conductive ACA of 0.63 W/m$\cdot$K thermal conductivity using the formulation incorporating $5 {\mu}m$ Ni and $0.2{\mu}m$ SiC-filled epoxy-bated binder system to achieve acceptable viscosity, curing property, and other thermo-mechanical properties such as low CTE and high modulus. The current carrying capability of ACA flip chip joints was improved up to 6.7 A by use of thermally conductive ACA compared to conventional ACA. Electrical reliability of thermally conductive ACA flip chip joint under current stressing condition was also improved showing stable electrical conductivity of flip chip joints. The high current carrying capability and improved electrical reliability of thermally conductive ACA flip chip joint under current stressing test is mainly due to the effective heat dissipation by thermally conductive adhesive around Au stud bumps/ACA/PCB pads structure.