• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.421-433
• /
• 2014

The aim of this study was to provide compression wear manufacture brands with information needed for product development. 8 tops and 7 bottoms from widely recognized compression wear manufacture brands were selected, and their product structural elements were analyzed, too. The results showed that most compression wear designs were applications of cutting lines designed considering muscle movements of the human body. The average number of cutting lines for patterns and designs were 14 for tops and 15 for bottoms. Different colored material was mainly used on the top for areas that require ventilation or high movement during sports for tops, and for areas that require muscle and joint support during sports for bottoms. The functionality of top materials were found to be stretch, muscle support, moisture absorption and high speed drying, warmth and ventilation for tops, in order of frequency, and stretch, muscle support, moisture absorption and high speed drying, and pressure for bottoms, in order of frequency. Tops were cut in the direction of the lengthwise grain, and bottoms were not only cut in the direction of the lengthwise grain, but also in the direction of the crosswise grain and bias for many products. Tops consisted of an average of 13 organically connected panels, and bottoms consisted of an average of 18 organically connected panels, which was analyzed to improve functionality. The average clothing surface area stretch rate was 85.7% for tops and 70.0% for bottoms, indicating that bottoms were designed to have higher strain rates compared to tops.

• Knowledge Management Research
• /
• v.12 no.4
• /
• pp.17-40
• /
• 2011

This study examines the differences of enacting models and influential causes of benefit-sharing practices between Korean automobile networks and the Japanese networks. The case study method is chosen for this research because only small numbers of supply networks adopt benefit-sharing practices. I employ semi-structured interviews with managers from four automobile manufacturers and eight of their suppliers in South Korea and Japan. I find that Japanese automobile networks have adopted a higher level of trust-demanding, with a higher level of value-creating models such as supplier development, joint-new-product development. Whereas, the Korean networks have adopted the lower trust demanding, also less profitable models such as supplier's suggestion and buyer's suggestion. In terms of work-related cultural values, I find that Japanese networks emphasized collectivism. Both buyers and suppliers in the Japanese networks are supposed to have common causes. In contrast, Korean networks emphasized individualism. Both buyers and suppliers of Korea generally do not identify that they are common group members with a common cause. I also find that a slight differences of the enacting models and the causes between foreign-owned networks and domestic-owned networks within each country. Foreign-owned networks have adopted lower trust demanding, also less profitable models. The findings demonstrate that the cultural values have a decisive influence on the adoption of benefit sharing models for the networks in Japan, and South Korea.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.642-651
• /
• 2009

The history of excavator design is not long enough which still causes most of the design considerations to be focused on static analysis or simple functional improvement based on static analysis. However, the real forces experiencing on each component of excavator are highly transient and impulsive. Therefore, the prediction and the evaluation of the movement of the excavator by dynamic load in the early design stage through the dynamic transient analysis of the excavator and ensuring of design technique plays an importance role to reduce development-cost, shorten product-deliver, decrease vehicle-weight and optimize the system design. In this paper, Commercial software DADS and ANSYS help to develop the track model of the crawler type excavator, and to evaluate the performance and the dynamic characteristics of excavator with various simulations. For that reason, the track of crawler type excavator is modelled with DADS Track Vehicle Superelement, and the reaction forces on the track rollers were predicted through the driving simulation. Also, the upper frame and cabin vibration characteristics, at the low RPM idle state, were evaluated with engine rigid body modelling. And flexibility body effects were considered to determine the more accurate joint reaction forces and accelerations under the upper frame swing motion.

• Nuclear Engineering and Technology
• /
• v.40 no.3
• /
• pp.183-190
• /
• 2008

Pyroprocessing is the optimal means of treating spent metal fuels from metal fast fuel reactors and is proposed as a potential option for GNEP in order to meet the requirements of the next generation fuel cycle. Currently, efforts for research and development are being made not only in the U.S., but also in Asian countries. Electrorefining, cathode processing by distillation, injection casting for fuel fabrication, and waste treatment must be verified by the use of genuine materials, and the engineering scale model of each device must be developed for commercial deployment. Pyroprocessing can be effectively extended to treat oxide fuels by applying an electrochemical reduction, for which various kinds of oxides are examined. A typical morphology change was observed following the electrochemical reduction, while the product composition was estimated through the process flow diagram. The products include much stronger radiation emitter than pure typical LWR Pu or weapon-grade Pu. Nevertheless, institutional measures are unavoidable to ensure proliferation-proof plant operations. The safeguard concept of a pyroprocessing plant was compared with that of a PUREX plant. The pyroprocessing is better adapted for a collocation system positioned with some reactors and a single processing facility rather than for a centralized reprocessing unit with a large scale throughput.

• Journal of Distribution Science
• /
• v.14 no.7
• /
• pp.71-81
• /
• 2016

Purpose - Because creativity, which is an intangible resource embedded within the company, can offer a competitive advantage, most companies have an interest in promoting creativity among their employees and division(e.g., marketing organization). Creativity renders a sustainable competitive advantage to a firm because it is a strategic resource that is valuable, flexible, rare, and imperfectly imitable or substitutable. Although most companies broadly recognize the importance of creativity, the methods for developing creativity remain elusive. Therefore, the present study investigates how to structure incentives to motivate employees to be more creative and how to develop tools to facilitate creativity. In detail, the present study aimed to examine the relationship between the regulatory focus of marketing organizations(e.g., promotion focus vs prevention focus) and creativity of marketing organizations. In addition, the present study set out to examine the moderating role of interaction of financial reward and creative training in addition to investigating the direct relationship between creativity and regulatory focus in New Product Development(NPD) context. Research design, data, and methodology - The data used to test the hypotheses are drawn from a survey of full time NPD project members(including project manager, designer, engineer, and marketer). The present study utilized data obtained mainly from a database compiled by the Korea Investors Service-Financial Analysis System which provides comprehensive corporate and financial information on firms listed on the Korea Stock Exchange. A study population comprising 1,000 South Korean firms was obtained from this database. We selected 864 firms from the database, and the firms have experiences of new product development project. We collected a total of 162 responses, for a 18.8% response rate. After we excluded 14 questionnaire because of incomplete responses, a total of 148 questionnaire remained(final response rate: 17.1%). Working with a sample of 148 responses in South Korea, hierarchical moderated regression is employed to test research hypotheses(

The relationship between promotion focus and creativity of marketing organization,

The relationship between prevention focus and creativity of marketing organization,

The moderating effect of joint influences(interaction between financial rewards and creativity training) on the relationship between promotion focus creativity of marketing organization,

The moderating effect of joint influences(interaction between financial rewards and creativity training) on the relationship between prevention focus creativity of marketing organization). SPSS 18.0 and AMOS software were used in the data analysis. Results - The empirical study confirmed that promotion focus of marketing organization is positively related to creativity of marketing organization. Also, prevention focus of marketing organization is positively affected to creativity of marketing organization. In addition, the interaction between financial rewards and creativity training moderated the relationship between regularity focus(e.g.), promotion focus vs prevention focus) and creativity of marketing organization. These results suggest that managers can improve the performances of their creative efforts by providing the use of financial rewards and creativity training in combination. Conclusion - Based on results of this study that examine the effects of regulatory focused creative efforts on creativity of marketing organization, promotion focus is helpful with marketing organizations to enhance their service innovation and performance. Prevention focused organization should allow monetary rewards and creativity training to increase their creativity for innovation of new products.

• Journal of Fisheries and Marine Sciences Education
• /
• v.3 no.2
• /
• pp.73-82
• /
• 1991

In recent years, the communication and the trade between the Republic of Korea(South Korea) and the Communist bloc has been activated. The simultaneous entrance of South Korea and North Korea to the United Nations will accelerate the political dialogue and also the trade which is indirectly carried out through a third country at present will be turned into direct way. Fisheries products are also treated as one of the important trade goods and there is a hopeful prospect that the amount of trade will be steeply increased in the near future. Furthermore, there is a great possibility of development up to the joint utilization of fishing grounds or the joint investment in fisheries projects. Concerning such points, since it is very much important to understand the present status of fisheries in North Korea, the author made a study on this field as requested by the Board of Unification, and report a part of the study here. The prominent character of North Korea's ruling sea area is that the sea is completely separated into two regions-the East Sea Region and the West Sea Region-and no continuity exists between them. The East Sea Region locates in the fringe of the biggest fishing ground of the world-the North Pacific Ocean-and very rich in resources not only warm water fishes but also cold water fishes. Especially alaska pollack, Theragra chalcogramma, is caught abundantly in this region. Contrary to that, fishing activity in the West Sea Region seems to be interrupted in winter. Even though some valuable warm water fishes-yellow corvenia, Pseudosciaena manchurica, and hair tail, Trichiurus lepturus, and so forth-come to this region from spring to summer along the coast line of this region for spawning, and vigorous fishing activity is carried out. But the most of them migrate southward to the neighboring waters of Cheju Island for wintering from autumn to winter, and so the fishing activity in this region seems to be interrupted greatly during winter. The total number of fishing boats in North Korea is estimated at 36 thousand and the rate of mechnization at about 70% compared with 99 thousand and 78% in South Korea. North Korea proclaimed an exclusive economic zone of 200 nautical miles in 1977. Specific character of this zone is setting of military boundary zone, up to 50 miles from the base line in the East Sea Region and also it covers whole region of the economic zone in the West Sea Region. Especially in the East Sea Region she set up a straight base line which can not be permissible by the international law. North Korea's statistics on fisheries product has not been announced officially on account of her unique isolationism, but it can be estimated through several data procured. At the first, the amount of fisheries products in the North Korea is reported as about 1.7 million ${\frac{M}{T}}$ by Fisheries Statistics which issued by the FAO in 1987, but a North Korea's trade organization announced the amount as 3.5 million ${\frac{M}{T}}$ in 1988. The former seems to be underestimated and the latter must be an exaggeration. According to Chikuni, who is a Japanese worker for FAO, prepared the unofficial statistics based on the evidence which he collected through the fineries development plan of the FAO/UNDP, and estimated the mean amount between 1982 and 1984 was 2.4 million ${\frac{M}{T}}$ or so. The Board of Unification estimated on the basis of various factors that the amount was 2.2 million ${\frac{M}{T}}$ or so in 1987 and in 1988. This seems to be the most reasonable. To solve the chronic lack of foreign currency, North Korea makes effort on the development of fisheries, and has even aimed fisheries product at 11 million ${\frac{M}{T}}$ by 1993, but this target looks unrealistic under the present circumstances. Somehow, we can exploit her extreme policy which has gone so far as to establish such an excessive and impractical target. Nevertheless this will be helpful to promote the joint development of the fishery activity between South Korea and North Korea.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.37.2-37.2
• /
• 2008

Korea-Japan Joint VLBI Correlator (KJJVC), to be used for Korean VLBI Network (KVN) in Korea Astronomy & Space Science Institute (KASI), is a high-speed calculator that outputs the correlation results in the maximum speed of 1.4GB/sec.To receive and record this data keeping up with this speed and with no loss, the design of the software running on the data archive system for receving and recording the output data from the correlator is very important. But, the simple kind of programming using just single thread that receives data from network and records it by turns, can cause a bottleneck effect while processing high speed data and a probable data loss, and cannot utilize the merit of hardwares supporting multi core or hyper threading, or operating systems supporting these hardwares. In this talk we summarize the design of the data transfer software for KJJVC and high speed, large capacity data archive system using general socket programming and multi threading techniques, and the pre-BMT(Bench Marking Test) results from the tests of the storage product providers' proposals using this software.

• Journal of Korea Technology Innovation Society
• /
• v.11 no.4
• /
• pp.532-562
• /
• 2008

Recently, one of the issues to be discussed from the viewpoint of product management in National R&D Programs is about the management of intellectual property produced by joint research and development. According to existing legislative system, the main R&D institute and collaborative enterprise own the patent produced by joint R&D activities together at the rate of investment. But, there are many discussions if that is right in legal principles and in substance. Patents by Cooperative National R&D Programs are very different from common patents because of its characteristics and have scheme controlled complexly by related laws and ordinances. This paper aims to review the legal theory on the possession and utilization of patents produced by Cooperative National R&D Programs, and to try to find out the improvement of existing legislative system. For this purpose, after looking into the meaning and the legal system of Cooperative National R&D Programs, and examining the ruling theory on the possession and utilization of co-invented patent, finally research the problems and improvement of existing related legislative system.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.2 s.43
• /
• pp.23-33
• /
• 2007

The growing environmental regulation governs the use of lead by RoHS, WEEE, and then. The electronic industry is moving to replace Pb-bearing solder with Pb-free solder. To use the Pb-free solder, microelectronic industry needs consequently the new reliability appraisal such as the packaging for high temperature process, various mechanical change caused by new solder, and the development of Pb-free sloder for long life of product. The evaluation of solder bar and mechanical properties of joint were performed compared with international standard, and new appraisal standard was established. The solderability and spread ability of Sn-0.7Cu solder material showed up to the standard. Shear test of solder joint using by the solder resulted that the shear strengths after thermal shock or after aging were not much lower than the shear strength of as-soldered and that they were also up to the standard.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.1029-1036
• /
• 2024

Drawing on the deep experience and understanding of the principles of nuclear safety, as well as many years of nuclear power plant design and operation, the EDF led NUWARD SMR Project is developing a design for a Small Modular Reactor (SMR) of 340 MWe composed of two 170 MWe independent units, that will supplement the offering of high-output nuclear reactors, especially in response to specific needs such as replacement of fossil-fuelled power plants. NUWARD SMR is a mix of proven and innovative design features that will make it more commercially competitive, while integrating safety features that comply with the highest international standards. Following the principles of redundancy and diversity and rigorous application of Defence in Depth (DID), with an international view on nuclear safety licensing, the Project also incorporates new safety approaches into its design development. The NUWARD SMR Project has been in development for a number of years, it entered conceptual design formally in mid-2019 and entered Basic Design in 2023. The objective of the concept design phase was to confirm the project technological choices and to define the first design configuration of the NUWARD SMR product, to document it, in order to launch pre-licensing with the French Safety Authority (ASN) and to define its estimated cost and its subsequent development and construction schedules. As a delivery milestone the Safety Options file (called the Dossier d'Options de Sûreté (DOS)) has been submitted to ASN in July 2023 for their opinion. An integral part of the NUWARD SMR Project, is not only to deliver a design suitable for France and to satisfy French regulation, but to develop a product suitable and indeed desirable, for the international market, with a first focus in Europe. In order to achieve its objectives and realise its market potential, the NUWARD SMR Project needs to define and realise its safety approach within an international environment and that is the key subject of this paper. The following paper: • Summarises the foundation principles and technological background which underpin the design; • Contextualises the key design features with regard to the international safety regulatory framework with particular emphasis on innovative passive safety aspects; • Illustrates the Project activities in preparation for first licensing in France, and also a wider international view via the ASN led Joint Early Review of the NUWARD SMR design, including Finnish and Czech Republic regulators, recently joined by the Swedish, Polish and Dutch regulators; • Articulates the collaborative approach to design development from involvement with the Project partners (the Commissariat à l'énergie atomique et aux énergies alternatives (CEA), Naval Group, TechnicAtome, Framatome and Tractebel) to the establishment of the International NUWARD Advisory Board (INAB), to gain greater international insight and advice; • Concludes with the focus on next steps into detailed design development, standardisation of the design and its simplification to enhance its commercial competitiveness in a context of further harmonisation of the nuclear safety and licensing requirements and aspirations.