• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.98-100
• /
• 2006

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제23권1호
• /
• pp.70-76
• /
• 2001

Purpose : To evaluate the efficacy of arthrocentesis for treatment of closed lock. Material : 42 patients were diagnosed to closed lock by physical, radiographic examriation and undergone arthrocentesis. All patients have a pain and mouth opening limitation on affected site. Method : Arthrocentesis was done under conscious sedation and local infiltration anesthesia, normal saline and some steroid was injected on upper compartment of tempormandibular joint. After pumping and lavage, manual reduction procedure of anterially displaced disc was done. All the patients wear an anterior repositioning splint just after arthrocentesis. The result of arthrocentesis was assessed by pain and difference of mouth opening. Result : Difference of mouth opening after arthrocentesis was improved to 18.85mm and pain was gradually decreased. All patients were worn stabilization type splint after mean 1.84 months. 6 patients had relapse of mouth opening limitation so done arthrocentesis again and delivered good results.

• 대한물리의학회지
• /
• 제4권4호
• /
• pp.257-267
• /
• 2009

Purpose：The purpose of this study is to examine the effectiveness of ultrasound and myofascial release in patients who have opening mouth limitation and temporomandibular disorder. Methods：Twenty students were randomly assigned to a myofascial release group(n=10) or an ultrasound group(n=7). Each group was treated for 15 minutes per a every treatment session for four weeks. Cervial range of motion(CROM) was used to measure cervical R.O.M., and a mm(millimeter) graduated ruler was used to measure opening mouth limitation. Results：Results of the follows : 1. The neck extension of range of motion of both groups was significantly increased in length of time (p<.05). 2. The neck flexion of range of motion of both groups was significantly increased (p<.05). 3. The quantity of opening mouth of temporomandibular joint of both groups was significantly increased (p<.05). Conclusion：These data suggest that myofascial release and ultrasound are beneficial to increasing a functional recovery of neck(flexion and extension) and opening mouth.

• Journal of Oral Medicine and Pain
• /
• 제37권4호
• /
• pp.205-211
• /
• 2012

35세 여자환자가 갑작스런 개구장애와 함께 발생한 급성 교합변화를 주소로 내원하였다. 환자는 이전 수년 동안의 관절잡음의 병력을 가지고 있었으며 관절잡음의 소실과 동시에 개구제한이 발생하였음을 보고하였다. 환자는 개구제한과 함께 개구시 우측 악관절의 통증을 호소하였으며 구강내 교합 검사 시 전치부의 개교합과 함께 하악이 우측으로 전위된 양상이 관찰되었다. 또한 좌측으로의 측방운동량 또한 감소된 것으로 관찰되었다. 자기공명영상에서 우측 악관절에서 비정복성 관절 원판 전방 변위가 관찰되었으며 후방 관절강의 협착이 관찰되었다. 이 환자는 우측 악관절의 비정복성 관절원판 전방변위로 진단되었으며, 급성 교합변화는 변위된 관절원판에 의해 야기된 과두위치의 변화로 초래된 것으로 추정하였다. 처음 3개월간의 물리치료와 약물치료와 병행된 안정교합장치요법에서는 만족할 만한 치료결과를 얻지 못하였으나, 그 다음 약 8개월간 사용된 악간견인장치 치료를 통해서 통증 및 교합변화가 해소되었으며 정상적인 개구량으로 회복되었다. 술후 촬영된 자기공명영상에서 우측 과두가 재형성된 양상을 관찰할 수 있었다.

• Journal of Oral Medicine and Pain
• /
• 제38권3호
• /
• pp.275-289
• /
• 2013

본 연구는 측두하악장애에 대한 치과 내원환자의 인지도와 이해도를 조사, 분석하기 위해 시행되었다. 인제대학교 부산백병원 치과 혹은 울산광역시 소재 한빛치과병원을 방문한 총 243명의 환자에게 설문조사를 시행하였고, 설문지의 모든 문항에 대해 성실히 답한 195명을 대상으로 하여 다음과 같은 결과를 얻었다. 1. "측두하악장애"란 용어를 인지하고 있는 환자는 전체 대상자의17.4%였고, 총 12년 이상의 학력을 가진 군(82.4%, p<0.01)은 다른 군에서 보다 "측두하악장애"에 대한 인지도가 유의하게 높았다. "턱관절질환"이란 용어를 인지하고 있는 환자는 전체 대상자의 81.0%였고, 30-49세 연령군(45.6%, p<0.05)과 총 12년 이상의 학력을 가진 군(60.1%, p<0.01)에서 다른 군보다 "턱관절질환"이란 용어에 대한 인지도가 유의하게 높았다. 2. 전체의 과반수 이상인 50.6%가 턱관절질환의 개념으로 "턱을 무리하게 사용해서 생기는 병이다"를 선택했다. 3. 턱관절질환에 대해 들은 경로로TV, 라디오(41.4%)가 가장 많았고, 가족과 친구(20.2%), 병원 및 병원관계자(18.2%), 인터넷(15.7%) 및 신문과 잡지(4.5%)순이었다. TV, 라디오를 통해서 턱관절질환에 대해 들어본 응답자 중 30-49세 연령군이 다른 군보다 유의하게 높은 비율(52.4%, p<0.05)을 보였다. 인터넷을 통해서 턱관절질환에 대해 들어본 응답자 중 18-29세 연령군이 다른 군보다 유의하게 높은 비율(61.3%, p<0.01)을 보였다. 병원과 병원관계자를 통해서 턱관절질환에 대해 들어본 응답자 중 총 12년 이상의 학력을 가진 군(75%, p<0.05)이 다른 군보다 유의하게 높은 비율을 보였다. 4. 환자들은 입을 벌리고 다물 때 턱에서 나는 소리(26.9%), 입을 크게 벌리지 못한다(25.1%), 귀 앞쪽 부위의 통증(13.7%)을 턱관절질환의 증상과 징후로 골랐다. 턱관절질환의 원인으로는 딱딱하거나 질긴 음식을 즐겨먹기(19.5%), 아래, 윗니가 잘 안 맞물림(19.0%), 한쪽 어금니로 음식씹기(18.5%)를 많이 선택했다. 턱관절질환의 치료법으로 턱관절수술(28%)을 가장 많이 꼽았고, 구강내 장치치료(23.9%), 물리치료(14.6%)가 그 뒤를 따랐다. 턱관절질환의 예방법으로 딱딱한 음식의 섭취를 줄인다(21.1%), 입을 너무 크게 벌리지 않는다(17.0%), 양쪽 어금니로 음식을 씹는다(15.4%)를 많이 선택했다.

• Steel and Composite Structures
• /
• 제21권1호
• /
• pp.137-156
• /
• 2016

Due to excellent advantages such as better illuminative effects, considerable material savings and ease and rapidness of construction, the bolted ball-cylinder joint which is a new type joint system has been proposed in space truss structures. In order to reveal more information and understanding on the behaviour of bolted ball-cylinder joints, full-scale experiments on eight bolted ball-cylinder joint specimens were conducted. Five joint specimens were subjected to axial compressive force, while another three joint specimens were subjected to axial tensile force. The parameters investigated herein were the outside diameter of hollow cylinders, the height of hollow cylinders, the thickness of hollow cylinders, ribbed stiffener and axial force. These joint specimens were collapsed by excessive deformation of hollow cylinders, punching damage of hollow cylinders, evulsion of bolts, and weld cracking. The strain distributions on the hollow cylinder opening were mainly controlled by bending moments. To improve the ultimate bearing capacity and axial stiffness of bolted ball-cylinder joints, two effective measures were developed: (1) the thickness of the hollow cylinder needed to be thicker; (2) the ribbed stiffener should be adopted. In addition, the axial stiffness of bolted ball-cylinder joints exhibited significant non-linear characteristics.

• 산업기술연구
• /
• 제23권A호
• /
• pp.69-81
• /
• 2003

Numerical analysis is important for the design, construction and maintenance of large caverns. The rock mass contains generally discontinuities such as faults, joints and fissures. The mechanical behavior and geometric characteristics of these discontinuities would have a significant impact on the stability of the caverns. In this research the Distinct Element Method(DEM) was used to analyze the structural stability of the large cavern. The Barton-Bandis Joint Model (B-B J.M) was used as a constitutive model for the joint. In addition, two different cases 1) analysis with a support system and 2) analysis with no support system, were analyzed to optimize a support system and to investigate reinforcing effects of a support system. The most significant parameters of in-situ stress, JRC of in-situ natural joints, and spatial distribution characteristics of discontinuities were acquired through field investigation. Displacement (horizontal, joint shear), maximum joint opening, maximum and minimum principal stresses, range of relaxed zone, rockbolt axial forces and shotcrete stresses were calculated at each excavation stage. As a result of analysis the calculated values proved to be under the allowable value Rockbolts also proved to be an efficient support measure to control joint shear displacement which had significant effects on extending the relaxed zone. As a consequence, the structural stability of the cavern was assured with an appropriate support system.

• Imaging Science in Dentistry
• /
• 제33권2호
• /
• pp.107-112
• /
• 2003

Purpose : To determine the relationship between clinical symptoms and magnetic resoncance (MR) images in patients presenting with temoporomandibular joint (TMJ) disorders. Materials and Methods: This study was based on 172 joints in 86 patients presenting with TMJ disorders. Joint pain and sound during jaw opening and closing movements were recorded, and the possible relationship between disc positions and bony changes of the condylar head and the articular fossa in MR images in the oblique sagittal planes were examined. Data were analyzed by Chi-square test. Results : There was no statistically significant relationship between clinical symptoms and MR images in the patients with TMJ disorders. Conclusion: In the patient with TMJ disorders, joint pain and sound could not be specific clinical symptoms that are related with MR image findings, and asymptomatic joints did not necessarily imply that the joints are normal according to MR image findings.

• Journal of Oral Medicine and Pain
• /
• 제23권3호
• /
• pp.281-288
• /
• 1998

The authors treated a 30-years old female patient who visited the Department of Oral Medicine, PNUH due to the chief complaint of limitation of mouth opening. The magnetic resonance imaging following clinical examination was used for establishing an accurate and reliable diagnosis and the patient was diagnosed as having anterior disc displacement without reduction in the right joint and anterior disc displacement with reduction in the left joint. For managing acute anterior disc displacement without reduction, mandible manipulation was applied first focusing on pain control and then stabilization appliance was used for maintenance of joint stabilization. With time, the sign and symptom was remarkably reduced and an active exercise program was recommended to maintain of normal muscle length, increase joint range of motion and develop normal coordination arthrokinematics. As a result of treatment, the patient did not complain discomfort of normal daily activities and it was difficult to consider that the displace disc was not reduced completely, but the improvement in range of motion and joint mobility were remarkably found. Therefore, an exercise program should be considered to maintain joint mobility and be effective as a self-care.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.357-373
• /
• 2022

The high-temperature gas-cooled reactor pebble-bed module project is the first commercial Generation-IV NPP(Nuclear Power Plant) in China. A new joint is used for the vertical support of RPV(Reactor Pressure Vessel). The steel corbel is integrally embedded into the reactor-cabin wall through eight asymmetrically arranged pre-stressed high-strength bolts, achieving the different path transmission of shear force and moment. The vertical monotonic loading test of two specimens is conducted. The results show that the failure mode of the joint is bolt fracture. There is no prominent yield stage in the whole loading process. The stress of bolts is linearly distributed along the height of corbel at initial loading. As the load increases, the height of neutral axis of bolts gradually decreases. The upper and lower edges of the wall opening contact the corbel plate to restrict the rotation of the corbel. During the loading, the pre-stress of some bolts decreases. The increase of the pre-stress strength ratio of bolts has no noticeable effect on the structure stiffness, but it reduces the ultimate bearing capacity of the joint. A simplified calculation model for the elastic stage of the joint is established, and the estimation results are in good agreement with the experimental results.