• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.59-68
• /
• 1997

The modelling techniques of a center pillar-to-roof rail joint for low frequency vibration analysis are examined and some fundamental problems are addressed. To develop a simplified beam-spring model of the joint, the present work is focused on 1) practical shell modelling techniques and 2) joint spring stiffness estimation methods a practical model-updating method to match the calculated natural frequencies to the experimentally determine ones is proposed, particularly focusing on spot welding modelling. In joint spring modelling, the results from the model with one joint spring are compared with those from the model with three coupled springs. Finally, some fundamental problems in beam-spring modelling are addressed.

• 소음진동
• /
• 제2권1호
• /
• pp.61-66
• /
• 1992

In general, structures have various joints such as bonded joint, bolted joint, bearing joint and welded joint. Dynamic modelling of such joints has been the current topic of interest. In this study, the dynamic modelling of plate structures with bonded joint was investigated by using modal testing, sensitivity analysis and condensation-inverse condensation method of FEM. A proper modelling procedure was proposed and the validity was verified.

• Journal of the Korean Data and Information Science Society
• /
• 제8권2호
• /
• pp.195-209
• /
• 1997

일반화 선형모형의 범위를 크게 확장한 준-우도 모형에서 반응변수의 분산성분인 산포모수가 상수가아니라 어떤 공변량들의 값에 의존하여 변하는 경우, 평균과 산포의 동시 모형화가 요구된다. 본 논문에서는 준-우도 모형에서 평균과 산포의 동시 모형화를 통해 실제 자료를 쉽게 분석하도록 해주는 통계 패키지 GENSTAT(release 5.3.2, 1996)을 활용하여, Carrol과 Ruppert(1987,pp.46-47)에 의해 소개된 에스테르 분해효소 (esterase assay)의 자료에 대해 그래픽 방법을 이용한 모형검토를 통해서 기존의 평균모형 보다는 평균과 산포의 동시 모형화를 고려해야 하는 필요성을 언급한 뒤, 그 자료에 대한 적절한 평균과 산포의 동시 모형을 찾는 방법을 연구한다.

• Steel and Composite Structures
• /
• 제45권1호
• /
• pp.1-21
• /
• 2022

In the structural analysis of steel frames, joints are generally considered as rigid or hinged considering their moment transfer ability. However, the first studies conducted with the beginning of the 20th century showed that the joints do not actually fit these two definitions. In reality, a joint behaves between these two extreme points and is called semi-rigid. Including the actual state of the joint in the structural analysis provides significant economic advantages, so the subject is an intense field of study today. However, it does not find enough application area in practice. For this reason, a large-scale literature published from the first studies on the subject to the present has been examined within the scope of the study. Three important points have been identified in order to examine a joint realistically; modelling the load-displacement relationship, performing the structural analysis and how to design. Joint modelling methods were grouped under 7 main headings as analytical, empirical, mechanical, numerical, informational, hybrid and experimental. In addition to the moment-rotation, other important external load effects like axial force, shear and torsion were considered. Various evaluations were made to expand the practical application area of semi-rigid connections by examining analysis methods and design approaches. Dynamic behaviour was also included in the study, and besides column-beam connections, other important connection types such as beam-beam, column-beam-cross, base connection were also examined in this paper.

• Earthquakes and Structures
• /
• 제12권1호
• /
• pp.55-65
• /
• 2017

Earthquake resilience of substations is essential for reliable and sustainable service of electrical grids. The majority of substation equipment consists of cylindrical porcelain components, which are vulnerable to earthquake shakings due to the brittleness of porcelain material. Failure of porcelain equipment has been repeatedly observed in recent earthquakes. Hence, proper seismic modelling of porcelain equipment is important for various limit state checks in both product manufacturing stage and detailed substation design stage. Sheds on porcelain core and cemented joint between porcelain component and metal cap have significant effects on the dynamic properties of the equipment, however, such effects have not been adequately parameterized in existing design guidelines. This paper addresses this critical issue by developing a method for taking these two effects into account in seismic modelling based on numerical and analytical approaches. Equations for estimating the effects of sheds and cemented joint on flexural stiffness are derived, respectively, by regression analyses based on the results of 12 pieces of full-scale equipment in 500kV class or higher. The proposed modelling technique has further been validated by shaking table tests.

• Structural Engineering and Mechanics
• /
• 제7권4호
• /
• pp.413-432
• /
• 1999

A macro-element model is developed to account for shear deformation and bond slip of reinforcement bars in the beam-column joint region of reinforced concrete structures. The joint region is idealized by two springs in series, one representing shear deformation and the other representing bond slip. The softened truss model theory is adopted to establish the shear force-shear deformation relationship and to determine the shear capacity of the joint. A detailed model for the bond slip of the reinforcing bars at the beam-column interface is presented. The proposed macro-element model of the joint is validated using available experimental data on beam-column connections representing exterior joints in ductile and nonductile frames.

• Steel and Composite Structures
• /
• 제47권2호
• /
• pp.203-216
• /
• 2023

The composite beam connections often encountered fracture failure in the welded bottom flange joint, and a bottom flange bolted connection has been proposed to increase the deformation ability of the bottom flange joint. The seismic performance of the bottom flange bolted composite beam connection was suffered from both the composite action of concrete slab and the asymmetric load transfer mechanisms between top and bottom beam flange joints. Thus, this paper presents a comprehensive numerical study on the working mechanism of the bottom flange bolted composite beam connections. Three available modelling methods and a new modelling method on the flange-stud-slab interactions were compared. The efficient numerical modeling method was selected and then applied to the parametric study. The influence of the composite slab, the bottom flange bolts, the shear composite ratio and the web hole shape on the seismic performance of the bottom flange bolted composite beam connections were investigated. A hogging strength calculation method was then proposed based on numerical results.

• 응용통계연구
• /
• 제13권2호
• /
• pp.407-414
• /
• 2000

Carroll과 Ruppert(1988)는 준가능도(quasi-likelihood)를 이용하여 에스트라제 측정자료를 회귀분석하였다. Jung과 Lee(1997)는 준가능도을 이용한 회귀분석모형의 적합도정통계량을 제안하였으며 검정 별과 기각되지 않아 본 분석모형이 타당하다고 주장하였다. 그러나 Lee와 Nelder(1998)의 잔차그림을 검토한 결과, 상기 모형으로는 평균증가에 따른 분산증가를 충분히 반영할 수 없었다. 본 논문에서는 Lee와 Nelder(1998)의 평균과 분산의 동시모형으로 에스트라제 자료를 재분석하고 잔차그림을 이용하여 모형의 타당성을 재평가하였다. 또한 분산에서 산포모형에 대한 적합도검정에는 Lee와 Nelder(1998)의 제한가능도(restricted likelihood)에 근거한 검정법이 보다 적절함을 제시하였다.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2000년도 암반공학문제의 수치해석(Numerical Analysis in Rock Engineering Problems)
• /
• pp.163-170
• /
• 2000

절리가 발달한 암반의 거동 특성을 효율적으로 모델링 할 수 있는 수치해석 방법으로서 널리 알려진 개별요소법은 서로 다른 알고리즘에 기초하여 개발된 두 가지 형태의 수치해석 방법으로 발전해 왔다. 본 논문에서는 Plesha 등에 의해 개발된 implicit알고리즘에 기초한 NURBM과 저자에 의해 개발된 explicit 알고리즘에 기초한 CBLOCK을 이용하여 불연속체 암반의 기초적인 거동 특성을 수치해석적으로 고찰하고 모델링상의 문제점들을 비교 분석하였다. CBLOCK 계산 결과에 의하면 절리의 수직 및 접선 강성비는 절리 분포에 따라 불연속체 암반의 안정성을 좌우하는 중요한 지수로서 사용될 수 있는 것으로 나타나고 있으나 NURBM 제산은 상이한 결과를 보였다. 또한 구조물의 안정성과 국부적인 파괴 거동의 해석에서 두 방법이 상이한 결과를 가져올 수 있는 것으로 나타났고 이는 수치해석적 모델링의 제약적 요소로 작용할 수 있음을 보여 주었다.

• 터널과지하공간
• /
• 제10권3호
• /
• pp.410-417
• /
• 2000

절리가 발달한 암반의 거동 특성을 효율적으로 모델링 할 수 있는 수치해석 방법으로서 널리 알려진 개별요소법은 서로 다튼 알고리즘에 기초하여 개발된 두 가지 형태의 수치해석 방법으로 발전해 왔다. 본 논문에서는 Plesha 등에 의해 개발된 implicit 알고리즘에 기초한 NURBM과 저자에 의해 개발된 explicit 알고리즘에 기초한 CBLOCK을 이용하여 불연속체 암반의 기초적인 거동 특성을 수치해석적으로 고찰하고 모델링상의 문제점들을 비교 분석하였다. CBLOCK 계산 결과에 의하면 절리의 수직 및 접선 강성비는 절리 분포에 따라 불연속체 암반의 안정성을 좌우하는 중요한 지수로서 사용될 수 있는 것으로 나타나고 있으나 NURBM 계산은 상이한 결과를 보였다. 또한 구조물의 안정성과 국부적인 파괴 거동의 해석에서 두 방법이 상이한 결과를 가져올 수 있는 것으로 나타났고 이는 수치해석적 모델링의 제약적 요소로 작용할 수 있음을 보여주었다.