• 한국지반공학회논문집
• /
• 제31권12호
• /
• pp.59-69
• /
• 2015

본 연구는 절리형성 암반지층 굴착벽체에 작용하는 토압에 대한 암반종류 및 절리조건 (전단강도 및 절리경사각)뿐만아니라 절리군의 수에 대한 영향을 조사하였다. 모델실험 및 그에 대한 시뮬레이션결과를 토대로 다양한 수치해석적 매개변수연구가 수행되었다. 해석결과, 굴착벽체에 발생하는 토압은 절리군에 포함된 절리경사각에 큰 영향을 받았지만, 절리군의 수 자체만으로는 토압에 큰 영향을 주지는 않았다. 연구결과는 또한 토사지반에서의 토압인 Peck 토압과 상호 비교되었으며, 이를 통해 절리가 형성된 암반지층 굴착벽체에 발생하는 토압은 토사지반에서 발생하는 토압과 크게 다를 수 있다는 것을 파악하였다. 본 연구를 통해서 향후 암반지층에 설치되는 굴착벽체 설계시 적용하는 토압은 암반종류 및 절리조건과 더불어 절리군에 포함된 절리경사각을 고려하여 산정해야 할 것으로 판단된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권4호
• /
• pp.38-47
• /
• 2013

프리캐스트 방식에 의해 제작이 가능한 격자형 강합성 바닥판의 이음부로서 콘크리트 전단키와 고장력볼트 체결로 구성된 조립식 이음부가 제안된 바 있다. 본 연구에서는 콘크리트 전단키와 고장력볼트로 구성된 이음부의 휨강성과 휨강도를 향상시키고자 단면상세를 개선하였고, 구조실험을 통해 얻은 결과를 기존 볼트체결 이음부와 비교 분석하였다. 비교분석 결과에 의하면, 전단스터드와 가외철근에 의한 이음부 콘크리트 보강으로 뚜렷한 전단균열 감소효과가 있었다. 모멘트-곡률 관계로부터 구한 휨강성을 서로 비교해 본 결과, 단면개선 전의 이음부에 비해 약 47% 정도 휨강성이 증가한 것을 알 수 있었다. 또한, 휨강도 비교결과에 의하면 개선된 이음부의 휨강도는 개선 전에 비해 약 32% 증가하였다. 개선된 이음부의 휨성능을 이음부가 없는 단면과 비교하면, 휨강도의 경우 동등 수준 이상이었으나, 휨강성의 경우는 약 37% 정도 더 작은 것으로 분석되었다.

• 기본간호학회지
• /
• 제10권2호
• /
• pp.244-253
• /
• 2003

Purpose: This study was done for the purpose of testing the effects of hand moxibustion on pain in the knee joint, range of motion of the knee, and discomfort during ADL in elderly persons with knee joint pain. Method: Nonequivalent control group pre-post test research design was used. The participants were 35 elders who had knee joint pain. Sixteen were assigned to the experimental group and 19 to the control group. The instruments used for this study were the CRS (Graphic rating scale) for knee joint pain, goniometer for knee joint ROM, and modified ADL questionnaire developed by Lee. Analysis of data was done by percents, means and standard deviation, $x^2$-test, t-test, and ANCOVA using SPSS WIN 10.0. Result: The pain score for the right knee joint after hand moxibustion was significantly different between the experimental group and the control group after hand moxibustion (p=.035). The pain score for the left knee joint was not significantly different between the experimental group and the control group after hand moxibustion (p=.075). Right and left knee ROM scores were significantly different between the experimental group and the control group after hand moxibustion (Right p=.000, Left p=.034). Discomfort of ADL score was not significantly different between the experimental group and the control group after hand moxibustion (p=.053). Conclusion: In summary, knee joint pain in elders after hand moxibustion decreased and knee ROM in elders after hand moxibustion increased. So it would be useful for nurses to provide hand moxibustion as an alternative therapy to elders with knee joint pain in the community and thus reduce joint pain and increase knee ROM.

• 한국지반공학회논문집
• /
• 제18권4호
• /
• pp.229-238
• /
• 2002

본 연구에서는 절리면 거칠기를 정량적으로 산출하기 위하여 표면 거칠기 계수, Rs를 이용한 측정방법을 제안하고, 이를 바탕으로 절리면 거칠기가 절리면 전단강도에 미치는 영향을 제시하였다. 제시된 Rs를 이용하여 새로운 절리면 전단강도 모델을 제안하였다. 연구 결과, 표면 거칠기 계수인 Rs는 암반의 절리면 거칠기를 정량적으로 표현할 수 있는 유용한 방법이 될 수 있음을 알 수 있었다. Rs에 의한 암코아 규모의 절리면 거칠기 측정에는 최대 측정간격으로 2mm, 최소 측정 길이로 5cm가 적당하나, 이를 대규모의 현장 절리면에 확대 적용하기 위해서는 변동규모(scale of fluctuation), $\delta_u$를 도입하여야 한다. 절리면 거칠기가 작은 경우, 전단강도는 절리면에서의 미끄러짐으로 유발되었으나, 거친 절리면에서의 전단강도는 거칠기의 일부분이 파괴됨으로 인하여 발생됨을 알 수 있었다.

• 한국도로학회논문집
• /
• 제13권2호
• /
• pp.9-20
• /
• 2011

국내 대부분을 차지하고 있는 노출형 신축이음장치는 주행 시 소음과 충격을 발생시켜 주행성을 떨어뜨리며, 많은 유지관리비가 소요되고 있다. 이에 미국과 유럽 등에서 적용되었던 매설형 신축이음장치인 Asphalt Plug Joint(APJ) 시스템을 기본으로 하부 구조를 개량한, 새로운 매설형 신축이음장치 Buried Folding Lattice Joint(BFLJ) 시스템이 제안되었다. 본 연구에서는 실험을 통해 매설형 신축이음장치의 상부포장 혼합물에 따른 내구성 및 신축 특성을 비교하였으며, 포장가속시험을 통해 실제 차량 하중에 대한 BFLJ 시스템의 내구성을 평가하였다. 실험결과 개발된 BFLJ 시스템은 기존 APJ 시스템에 비해 신축성능이 우수하며 접합부에서의 응력 집중을 완화시켰다. 또한 차량 하중에 의한 BFLJ 시스템의 표면 처짐이 크게 발생하지 않았으며, 신축이음장치 내의 하부 구조의 손상이 없었던 점에서 기존 APJ 시스템의 문제점을 극복하고 조기파손을 예방할 수 있을 것이라 판단되었다.

• 한국도로학회논문집
• /
• 제20권3호
• /
• pp.65-73
• /
• 2018

PURPOSES : In this study, the propriety of expansion joint spacing of airport concrete pavement was examined by using weather and material characteristics. METHODS : A finite element model for simulating airport concrete pavement was developed and blowup occurrence due to temperature increase was analyzed. The critical temperature causing the expansion of concrete slab and blow up at the expansion joint was calculated according to the initial vertical displacement at the joint. The amount of expansion that can occur in the concrete slab for 20 years of design life was calculated by summing the expansion and contraction by temperature, alkali-silica reaction, and drying shrinkage. The effective expansion of pavement section between adjacent expansion joints was calculated by subtracting the effective width of expansion joint from the summation of the expansion of the pavement section. The temperature change causing the effective expansion of pavement section was also calculated. The effective expansion equivalent temperature change was compared to the critical temperature, which causes the blowup, according to expansion joint spacing to verify the propriety of expansion joint applied to the airport concrete pavement. RESULTS : When an initial vertical displacement of the expansion joint was 3mm or less, the blowup never occurred for 300m of joint spacing which is used in Korean airports currently. But, there was a risk of blow-up when an initial vertical displacement of the expansion joint was 5mm or more due to the weather or material characteristics. CONCLUSIONS : It was confirmed that the intial vertical displacement at the expansion joint could be managed below 3mm from the previous research results. Accordingly it was concluded that the 300m of current expansion joint spacing of Korean airports could be used without blowup by controling the alkali-silica reaction below its allowable limit.

• Structural Engineering and Mechanics
• /
• 제18권5호
• /
• pp.645-669
• /
• 2004

In seismic analysis of moment-resisting frames, beam-column connections are often modeled with rigid joint zones. However, it has been demonstrated that, in ductile reinforced concrete (RC) moment-resisting frames designed based on current codes (to say nothing of older non-ductile frames), the joint zones are in fact not rigid, but rather undergo significant shear deformations that contribute greatly to global drift. Therefore, the "rigid joint" assumption may result in misinterpretation of the global performance characteristics of frames and could consequently lead to miscalculation of strength and ductility demands on constituent frame members. The primary objective of this paper is to propose a rational method for estimating the hysteretic joint shear behavior of RC connections and for incorporating this behavior into frame analysis. The authors tested four RC edge beam-column-slab connection subassemblies subjected to earthquake-type lateral loading; hysteretic joint shear behavior is investigated based on these tests and other laboratory tests reported in the literature. An analytical scheme employing the modified compression field theory (MCFT) is developed to approximate joint shear stress vs. joint shear strain response. A connection model capable of explicitly considering hysteretic joint shear behavior is then formulated for nonlinear structural analysis. In the model, a joint is represented by rigid elements located along the joint edges and nonlinear rotational springs embedded in one of the four hinges linking adjacent rigid elements. The connection model is able to well represent the experimental hysteretic joint shear behavior and overall load-displacement response of connection subassemblies.

• Archives of Plastic Surgery
• /
• 제36권4호
• /
• pp.450-457
• /
• 2009

Purpose: The second toe PIP joint free flap is a method of reconstruction used for abnormalities of the PIP joint of the finger. We report the results of the additional tenolysis in patients with a difference between passive ROM and active ROM after second toe PIP joint free flap. Methods: From March 2001 to July 2008, tenolysis was performed in patients with a difference in their active and passive ROM after second toe PIP joint free transfer, performed on 14 fingers. We performed a retrospective analysis of the medical records, noting the clinical and radiological findings. In addition, we measured the preoperative and postoperative range of motion of the PIP joint. Results: The average active ROM was $22.5^{\circ}$ at the three months after the joint transfer surgery, and was $38^{\circ}$ after additional tenolysis between five months and twelve months after the joint transfer. Conclusions: Additional tenolysis, after the second toe PIP joint free flap, might be a good option for improved results in patients with difference in active and passive ROM of a transferred PIP joint.

• 화약ㆍ발파
• /
• 제35권4호
• /
• pp.1-9
• /
• 2017

본 연구는 인공절리를 이용한 발파효과 검토를 위해 인공절리 수, 인공절리 간격, 인공절리 경사에 따른 발파속도의 영향 및 기여도를 평가 분석한 연구이다. 인공절리 상태 변화에 따른 발파속도는 동적해석 프로그램인 AUTODYN을 이용하여 획득하였다. 수치해석 결과에 대해 정규화 분석을 수행하였고, 각 인자의 기여도 분석을 위해 강건설계 실험계획법을 이용하여 설계 인자를 분석하였다. 각 인자는 3수준으로 설정하였고, 분석에 직교 배열표 $L_9(3^4)$를 사용하였다. 정규화 분석을 통해 수치해석 결과를 분석한 결과 인공절리 경사가 증가함에 따라 발파속도는 감소하는 경향을 보였다. 또한, 인공절리 간격과 인공절리 경사에 대해 발파속도를 분석한 결과 발파속도는 경사가 수직일 때 인공절리 간격이 증가함에 따라 감소는 경향을 보였다. 강건설계를 이용한 기여율 분석결과 발파속도에 가장 큰 영향을 미치는 것은 인공절리 경사이며, 이어서 인공절리 수, 인공절리 간격 순으로 기여율이 평가되었다.

• 대한물리의학회지
• /
• 제2권2호
• /
• pp.101-112
• /
• 2007

Purpose : The purpose of this study was to evaluate influence of sacroiliac joint mobilization on lower extremity muscle strength. Methods : The subjects were consisted of thirty patients who had Leg length inequality(LLI) of more than 10mm(16 females. 14 males) from 21 to 41 years of age(mean aged 24.87). All subjects randomly assigned to sacroiliac joint mobilization group(n=15), control group(n=15). sacroiliac joint mobilization group received sacroiliac joint mobilization about 10 minutes for 3 times per week during 4 weeks period. Control group not received intervention during 4 weeks period. The tape measure method(TMM) was used to measure functional Leg length inequality. Biodex System 3 Pro was used to measure strength of Knee extension & flexion. All measurements of each subjects were measured at pre-test, 2weeks post-test and 4weeks post-test. Results : 1. The LLI of sacroiliac joint mobilization group was significantly reduced according to within treatment period(p<.05), most significantly reduced between pre-test and post-test(p<.05). sacroiliac joint mobilization group significantly more reduced than control group(p<.05). 2. The knee extension strength of sacroiliac joint mobilization group was significantly increased according to within treatment period(p<.05), most significantly increased between pre-test and post-test(p<.05). sacroiliac joint mobilization group significantly more increased than control group(p<.05). 3. The knee flexion strength of sacroiliac joint mobilization group was significantly increased according to within treatment period(p<.05), most significantly increased between pre-test and post-test(p<.05). sacroiliac joint mobilization group significantly more increased than control group(p<.05). Conclusion : sacroiliac joint mobilization can reduce LLI and increased lower extremity muscle strength.