• 노동경제논집
• /
• 제33권1호
• /
• pp.53-84
• /
• 2010

이 논문은 한국노동패널 조사 자료를 이용하여 실직자들이 겪는 임금 손실의 정도를 실직 발생 직후에서 부터 4년 후까지 분석하였다. 종전에 국내에서 이루어진 연구들에서는 주로 실직 직후에 발생하는 손실에 초점이 맞춰졌는데, 실직으로 인한 손실이 지속될 경우 이는 손실을 과소 추정하는 것이 된다. 논문의 분석 결과에 의하면 실직 발생 4년 후에도 실직으로 인한 임금 손실이 유의미하게 지속되는 것으로 나타났으며, 이는 실직으로 인해 발생하는 일자리 경험의 손실과 반복 실직의 발생에 크게 영향 받은 결과인 것으로 나타났다.

• 노동경제논집
• /
• 제27권3호
• /
• pp.75-111
• /
• 2004

현 연구에서는 NLSY 데이터를 이용하여 개개인이 노동시장에 진입한 이래로 겪은 모든 실직 및 실업 경험을 추출하고, 이를 바탕으로 특정 시점에서의 임금이 그 이전에 겪었던 실직의 횟수와 누적실업기간에 어떻게 영향을 받는가를 분석하였다. 기존의 연구들과는 달리 현 연구에서는 1회의 실업기간이 아닌 누적실업기간의 효과를 분석하였으며 나아가 실직 횟수와 누적 실업기간 중 어느 변수가 임금에 보다 큰 부정적 영향을 주는가를 분석하였다. 실직 횟수와 누적실업기간을 동시에 설명변수로 포함시킬 경우 남성 표본에서는 누적실업기간만이 유의하게 임금을 낮추는 것으로 나타나는 것과 대조적으로 여성 표본에서는 실직 횟수만이 임금에 부정적인 영향을 주는 것으로 나타났다. 남성의 경우 누적실업기간이 한 달 더 길어지면 임금은 0.4% 낮아지는 것으로 나타났으며 이 추정치는 표본 제약을 다양하게 바꾸고 추정모형을 달리하여도 변함 없이(robust) 나타났다. 한편 여성의 경우 추가적인 1회의 실직 경험이 가져다 주는 임금의 하락은 2%를 상회하는 것으로 나타났다.

• 한국공작기계학회논문집
• /
• 제13권5호
• /
• pp.55-61
• /
• 2004

Chatter monitoring is also important for realizing an unmanned machining system. while many researches were done on this area, it is still a difficult job to detect very small amplitude amount of chattering. A monitoring system using a capacitive spindle displacement sensor was developed to monitor cutting vibration in turning in this research. The variance of the measured spindle displacement signals using the developed sensor was calculated and utilized to quantify the small vibration in machining. The results were compared with variance obtained using a tool dynamometer. The result showed that the developed system could be utilized in monitoring the subtle changes of cutting vibrations with high sensitivity confidence.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.516-522
• /
• 2003

Monitoring chattering is also important for realizing an unmanned machining system While many researches were done on this area, it is still a difficult job to detect very small amplitude amount of chattering. A monitoring system using a capacitive spindle displacement sensor was developed to monitor cutting vibration in turning in this research. The variance of the measured spindle displacement signals using the developed sensor was calculated and utilized to quantity the small vibration in machining. The results were compared with variance obtained using a tool dynamometer. The result showed that the developed system could be utilized in monitoring the subtle changes of cutting vibrations with high sensitivity confidence.

• STI Policy Review
• /
• 제4권1호
• /
• pp.1-13
• /
• 2013

The Schumpeterian process of "creative destruction", associated with the emergence and diffusion of new radical, so-called "general purpose" technologies, has throughout history impacted wealth and income, jobs creation, jobs displacement, and the emergence and submergence of new hotspots of innovation. Emerging countries have benefited most from such a renewing of those societies' dynamics, leading them to higher levels of economic development and welfare. Doing so they have shown a remarkable capacity in moving upstream in the value chain, from outsourcing of manufacturing activities to autonomous process technology development, product development, design, and applied research. At the same time however, such Schumpeterian processes have now and then turned into exactly opposite processes of "destructive creation." Such processes seem to have become common among what could be called "submerging" economies: innovation only benefitting a few at the expense of many with as a result an opposite pattern of a long term reduction in overall welfare, productivity, and employment growth.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1828-1831
• /
• 1997

this paper, to represent the robot motion approximately in space, delas with algorithm for position recognition of space robot, target and obstacle with vision system in 2-D. And also there are algorithms for precise distance-measuring and calibration usign laser displacement system, and for trajectory selection for optimizing moving to object, and for robot locomtion with air-thrust valve. And the software synthesizing of these algorithms hleps operator to realize the situation certainly and perform the job without any difficulty.

• 한국시뮬레이션학회논문지
• /
• 제6권1호
• /
• pp.61-69
• /
• 1997

In 3D computer graphics, fractal techniques have been applied to terrain models. Even though fractal models are convenient way to get the data of terrain models, it is not easy to gain the final results by manipulating the data of terrain model. However, by using the object oriented programming techniques, we could reduce the effort of programming job to find the final result. In this paper, a set of classes made by object oriented programming technique is presented. To show the results, the data of a terrain model were made by a fractal technique, namely, the midpoint displacement methods with square lattices of points.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.5-7
• /
• 2006

In this paper, developed a uninterruptible hotline tools and method for replacement of strain pole crossarm on overhead distribution line. For practical use of developed tools, following direct hot-line methods were proposed: 'Direct hot-lire method for replacement of pin pole crossarm', 'Direct hot-line method for alteration of crossarm' and 'Crossarm replacement method in uninterruptible cable displacement area'. These methods were proposed more simple and safe working on hotline job.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.320-325
• /
• 1999

An absolute type shaft encoder which utilized moire fringe will be presented in this paper. Linear moire fringe is commonly used to measure the displacement of the linear motion. However, an absolute encoder which measure the rotation angle of a shaft is operated usually with a code disk which the gray code pattern is printed on. Such encoder has inherently resolution limit because of the patterning mechanism and sensing mechanism. In order to measure the position of fringes which move as the code disk rotates, neural network was developed in this paper. Formerly fringe position is usually measured by a sophisticated software, which needs a little long calculation time. However, using neural network method can eliminate such calculation time, even though it needs learning job. The proposed method is verified through several experiments.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.59-64
• /
• 2006

In this paper, developed a uninterruptible hotline tools and method for replacement of strain pole crossarm on overhead distribution line. For practical use of developed tools, following direct hot-line methods were proposed: 'Direct hot-line method for replacement of pin pole crossarm', 'Direct hot-line method for alteration of crossarm' and 'Crossarm replacement method in uninterruptible cable displacement area'. These methods were proposed more simple and safe working on hotline job.