• 한국기계가공학회지
• /
• 제21권1호
• /
• pp.66-72
• /
• 2022

The Mooney-Rivlin second order optimal strain energy function derived through uniaxial tensile test and analysis was applied to a gasket to confirm the internal stress and surface pressure generated during compression. The Taguchi method, a statistical technique, was used to design the optimum shape of the gasket, and through characteristic evaluation, the optimum shape of the gasket was obtained when the reference plane (T: 0.15 mm), contact surface (W: 1.00 mm), and curvature (R: 0.30 mm) were used. It was determined that the optimum shape yields a von Mises stress of 4.83 MPa, and the contact pressure stress is 20.14 MPa, which satisfies breakage and sealing requirements. In the future, we plan to manufacture a jig that can measure surface pressure to conduct comparative verification studies between the test results and analysis results.

• Fisheries and Aquatic Sciences
• /
• 제26권5호
• /
• pp.336-343
• /
• 2023

This study aimed to know the response of deep-sea squid Sthenoteuthis oualaniensis to the light colors of the artificial bait. This experiment used the commercial artificial flashlight baits commonly sold in the fishing shop. The bait has several different light color combinations. The light colors were modified into several light colors by inactivating certain colors and used as treatments. The study is expected to be able to find flashlight bait's most effective color for squid fishing. We applied red-green, green, blue, and commercial bait lights in this study. Each treatment has 3 replications. The effect was expressed as the amount of squid caught. Data were analyzed by one-way analysis of variance. Results showed a significant effect on the number of squid catches. There was significantly different squid catches among the treatments. It indicates that this artificial flashlight bait could be developed to maximize squid catches. This finding can be used for the local fishermen's income and the squid fisheries development.

• 정보보호학회논문지
• /
• 제33권2호
• /
• pp.325-336
• /
• 2023

자율주행 기술이 발전함에 따라 차량에 탑재되는 외부접점 센서의 수가 증가하고 있으며 특히 차량용 초음파 센서는 버스 토폴로지 형태로서 LIN 프로토콜을 사용하여 연결되며 주변을 감지하고 상태 메시지를 전송하여 차량 내부 네트워크에 접근한다. LIN은 프로토콜의 보안성이 검증되지 않아 공격에 취약하기 때문에 안전성을 평가하기 위한 테스트가 필요하지만, 물리적인 제약으로 인해 실제 차량을 이용한 분석에 한계가 있으며 이를 위한 테스트 환경이 부족하기 때문에 테스트에 어려움이 있다. 따라서, 본 논문에서는 LIN 프로토콜 분석 및 테스트를 위해 CAN과의 연동 분석이 가능한 테스트베드를 개발하고 초음파 센서를 이용하여 그 효용성을 검증하였다.

• Tribology and Lubricants
• /
• 제39권2호
• /
• pp.56-60
• /
• 2023

In this study, we evaluate the anisotropic flow of droplets according to the directionality of asperities. We manufacture a mold with an inclined hole by adjusting the jig angle using a high-power diode laser. Using the manufactured mold, we prepare specimens for wettability studies by the micro molding technique. We fabricate twelve kinds of surfaces with micro-asperities inclined at 0°, 15°, 30°, and 45° for asperity pitches of 100 ㎛, 200 ㎛, and 300 ㎛. We evaluate the static and dynamic behaviors of the droplets as a function of the asperities pitch and inclination angles. The anisotropic effect increases as the pitch increases between asperities, and the anisotropic flow characteristics increase as the inclination angle of the asperities increases. On the surface with hole pitches of 100 ㎛ and 200 ㎛, the contact angle of the droplet shows high hydrophobicity at approximately 160°, but on the surface with the 300-㎛ hole pitch, the contact angle is approximately 110°, indicating that the hydrophobic effect rapidly reduces. Additionally, when the inclination angle of the asperities is approximately 30°, the left and right contact angle deviations of the droplet are the lowest, showing that the roll-off angle is relatively low.

• 한국공간구조학회논문집
• /
• 제22권4호
• /
• pp.81-88
• /
• 2022

The paper introduces an experimental program for the newly developed vertical joints between Precast Concrete (PC) walls to improve their in-plane shear capacity. Compared to the existing vertical joints, two types of vertical joints were developed by increasing the transverse reinforcement ratio and improving frictional force at the joint interface. A total of four specimens including the Reinforced Concrete (RC) wall and PC walls with developed vertical joints were designed and constructed. The constructed specimens were experimentally investigated through monotonic shear tests. The observed damage, load-deformation relationship, strain and strength are investigated and compared with the cases of RC wall specimen. Experimental results indicate that the maximum force and initial stiffness of the PC wall with proposed vertical joints were decreased by comparing with those of RC wall. However, the ultimate displacement increased by up to 217.30% compared to the RC wall specimen. In addition, brittle failure did not occurred and relatively few cracks and damages occurred.

• Journal of Interdisciplinary Genomics
• /
• 제5권2호
• /
• pp.18-23
• /
• 2023

Conventional evaluation method for identifying the organic cause of short stature has a low detection rate. If an infant who is small for gestational age manifests postnatal growth deterioration, triangular face, relative macrocephaly, and protruding forehead, a genetic testing of IGF2, H19, GRB10, MEST, CDKN1, CUL7, OBSL1, and CCDC9 should be considered to determine the presence of Silver-Russell syndrome and 3-M syndrome. If a short patient with prenatal growth failure also exhibits postnatal growth failure, microcephaly, low IGF-1 levels, sensorineural deafness, or impaired intellectual development, genetic testing of IGF1 and IGFALS should be conducted. Furthermore, genetic testing of GH1, GHRHR, HESX1, SOX3, PROP1, POU1F1, and LHX3 should be considered if patients with isolated growth hormone deficiency have short stature below -3 standard deviation score, barely detectable serum growth hormone concentration, and other deficiencies of anterior pituitary hormone. In short patients with height SDS <-3 and high growth hormone levels, genetic testing should be considered to identify GHR mutations. Lastly, when severe short patients (height z score <-3) exhibit high levels of prolactin and recurrent pulmonary infection, genetic testing should be conducted to identify STAT5B mutations.

• 한국공간구조학회논문집
• /
• 제24권1호
• /
• pp.29-36
• /
• 2024

The paper presents the experimental investigation of RC beams retrofitted with Textile Reinforced Mortar (TRM), featuring enhanced bond capacity. Anchoring systems, including an extension of retrofitting length and the use of chemical anchors, are newly employed to improve the structural performance of the RC beam retrofitted with TRM. For the experimental investigation, a total of seven shear-critical RC beams, with and without stirrups, were designed and constructed. The structural behaviors of specimens retrofitted with the proposed TRM methods were compared to those of non-retrofitted specimens or specimens strengthened with conventional TRM methods. Crack pattern, force-displacement relationship, and absorbed energy were evaluated for each specimen. The experimental results indicate a significant improvement in the shear capacity of the RC beam with the proposed retrofitting method. Therefore, it is concluded that the application of an extended retrofitting length and chemical anchors to the TRM retrofitting method can effectively enhance the bond capacity of TRM, thereby improving the shear performance of RC beams.

• 디지털융복합연구
• /
• 제12권9호
• /
• pp.101-109
• /
• 2014

본 연구는 중앙일간지 편집기자의 역할인식을 사회안정 및 개혁 견제로, 역할지향을 취재원지향, 사시지향, 독자지향으로 구분하고 역할인식과 사실적 보도태도 사이에서 역할지향의 매개효과를 분석하였다. 분석결과 취재원지향은 사회적 안정 역할 인식의 영향을 받는 것으로 나타났는데 사실적 보도 역할 인식을 감소시키는 요인으로 나타났다. 사시지향은 사회적 안정 역할의 영향을 받을 뿐 사실적 보도태도에는 영향을 미치지 않는 것으로 나타났으며, 독자지향성은 편집기자의 역할인식이 사실적 보도역할인식을 강화하는 부분매개효과가 있는 것으로 나타났다. 이러한 연구결과는 취재원의 기대에 영향을 받을 경우 사실적 보도태도는 감소하며, 독자의 기대에 영향을 받을 경우 사실적 보도태도는 증가하는바 편집권이 외부요인에 의해 영향을 받을 수 있다는 것을 실증적으로 입증하고 있다.

• 한국재료학회지
• /
• 제24권10호
• /
• pp.556-564
• /
• 2014

To synthesize a high-performance photocatalyst, N doped $TiO_2$ nanotubes deposited with Ag nanoparticles were synthesized, and surface characteristics, electrochemical behaviors, and photocatalytic activity were investigated. The $TiO_2$ nanotubular photocatalyst was fabricated by anodization; the Ag nanoparticles on the $TiO_2$ nanotubes were synthesized by a reduction reaction in $AgNO_3$ solution under UV irradiation. The XPS results of the N doped $TiO_2$ nanotubes showed that the incorporated nitrogen ions were located in interstitial sites of the $TiO_2$ crystal structure. The N doped titania nanotubes exhibited a high dye degradation rate, which is effectively attributable to the increase of visible light absorption due to interstitial nitrogen ions in the crystalline $TiO_2$ structure. Moreover, the precipitated Ag particles on the titania nanotubes led to a decrease in the rate of electron-hole recombination; the photocurrent of this electrode was higher than that of the pure titania electrode. From electrochemical and dye degradation results, the photocurrent and photocatalytic efficiency were found to have been significantly affected by N doping and the deposition of Ag particles.

• 한국의류학회지
• /
• 제12권1호
• /
• pp.1-11
• /
• 1988

This study dealt with the Dopo, one of the representative ceremonial dress that acclasical scholar used after the middle of the period of the Chosun dynasty. This study represents the period of Dopo's formation and its origin, and the characteristics of the weary of Dopo in Young Dong Province Area is arranged by folkloric method on the base of the exisitng facilities. Dopo has worn since the middle of the period of the Chosun dynasty. It is the kind of Jig young Po that its back is cuffed for convenience and has another cloth as a ceremonial dress. It is thought to be one of the national customs pos formed by the mixture of the big sleeve type which is influenced by confusion life feeling. It seemed that the name of DoPo comes from the Jigchal, an ordinary dress of a high official in China, which is call Dopo. This Dopo is changed and received and so disappeared but it is still used such as ceremonial dress, the necessary articles for marriage of the bride, a bridegroom's liturgical vestments of a memorial service held on the anniversary of the death of a person, mourning dress and a shroud grave clothes. This area has different characters on wearing customs. It is changed into the kind of Dopo, with its back not cutting. The hemp sack is almost used as its subject matter. It doesn't have collar strip for the classification of one's family in any case, and Dopo which is prepared for necessary articles for marriage can not be taken tack after seperating by divorce.