• Journal of applied mathematics & informatics
• /
• 제29권3_4호
• /
• pp.697-712
• /
• 2011

We present in this paper two versions of a general correction procedure applied to a classical linear iterative method. This gives us the possibility, under certain assumptions, to obtain an extension of it to inconsistent linear least-squares problems. We prove that some well known extended projection type algorithms from image reconstruction in computerized tomography fit into one or the other of these general versions and are derived as particular cases of them. We also present some numerical experiments on two phantoms widely used in image reconstruction literature. The experiments show the importance of these extension procedures, reflected in the quality of reconstructed images.

• Nuclear Engineering and Technology
• /
• 제45권4호
• /
• pp.529-538
• /
• 2013

Scattered photons cause blurring and distortions in flash radiography, reducing the accuracy of image reconstruction significantly. The effect of the scattered photons is taken into account and an iterative deduction of the scattered photons is proposed to amend the scattering effect for image restoration. In order to deduct the scattering contribution, the flux of scattered photons is estimated as the sum of two components. The single scattered component is calculated accurately together with the uncollided flux along the characteristic ray, while the multiple scattered component is evaluated using correction coefficients pre-obtained from Monte Carlo simulations.The arbitrary geometry pretreatment and ray tracing are carried out based on the customization of AutoCAD. With the above model, an Iterative Procedure for image restORation code, IPOR, is developed. Numerical results demonstrate that the IPOR code is much more accurate than the direct reconstruction solution without scattering correction and it has a very high computational efficiency.

• 산업공학
• /
• 제20권4호
• /
• pp.469-478
• /
• 2007

Rail transportation terminals play an important role in inland transportation systems, because the operation productivity in the terminals significantly influences the efficiency of the whole transportation systems. This paper addresses a design method of a real rail terminal that satisfies a pre-specified throughput capacity. In order to construct high performance rail terminal, it is shown how design parameters can be estimated systematically. Examples of the design parameters are the number of transshipment tracks, the number of rail cranes, and the number of internal trucks. These design parameters are estimated by using simple equations and the validity of the values of these parameters are tested by using simulation. Furthermore, some iterative correction procedure, which uses the simulation technique and the equations alternately, are proposed.

• Journal of Mechanical Science and Technology
• /
• 제15권1호
• /
• pp.125-138
• /
• 2001

An efficient correction storage scheme on a structured grid is applied to a sequence of approximate Jacobian systems arising at each time step from a linearization of the discrete nonlenear system of equations, obtained by the implicit time discretization of the conservation laws for unsteady fluid flows. The contribution of freezing the Jacobian matrix to computing costs is investigated within the correction storage scheme. The performance of the procedure is exhibited by measuring CPU time required to obtain a fully developed laminar vortex shedding flow past a circular cylinder, and is compared with that of a collective iterative method on a single grid. In addition, some computed results of the flow are presented in terms of some functionals along with measured data. The computational test shows that the computing costs may be saved in favor of the correction storage scheme with the frozen Jacobian matrix, to a great extent.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2004년도 The 3rd Annual Conference for The Korean Society for Bioinformatics Association of Asian Societies for Bioinformatics 2004 Symposium
• /
• pp.107-116
• /
• 2004

The advent of microarray technologies gives an opportunity to moni tor the expression of ten thousands of genes, simultaneously. Such microarray data can be deteriorated by experimental errors and image artifacts, which generate non-negligible outliers that are estimated by 15% of typical microarray data. Thus, it is an important issue to detect and correct the se faulty probes prior to high-level data analysis such as classification or clustering. In this paper, we propose a systematic procedure for the detection of faulty probes and its proper correction in Genechip array based on multivariate statistical approaches. Principal component analysis (PCA), one of the most widely used multivariate statistical approaches, has been applied to construct a statistical correlation model with 20 pairs of probes for each gene. And, the faulty probes are identified by inspecting the squared prediction error (SPE) of each probe from the PCA model. Then, the outlying probes are reconstructed by the iterative optimization approach minimizing SPE. We used the public data presented from the gene chip project of human fibroblast cell. Through the application study, the proposed approach showed good performance for probe correction without removing faulty probes, which may be desirable in the viewpoint of the maximum use of data information.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.110-115
• /
• 1998

An axisymmetric Navier-Stokes procedure has been developed to analyze the pulse jet flow in a ceramic filter unit for the dust dislodging process. Using Baldwin-Lomax turbulence model as a closure relationship, the SIAF(Scalar Implicit Approximate Factorization) algorithm together with the ${\delta}^k-Correction$ iterative time marching scheme is adopted to solve the unsteady compressible Navier-Stokes equations. After some validation tests, the code has been applied to solve the pulse jet flow and examine the effects of geometry and reservoir pressure condition on the pressure level inside the filter unit. To avoid dealing with the uncertainty of such factors as the cohesion of the collected dust and the adhesion of the dust to the medium and also to simplify the analysis, the filter wall is assumed to be impermeable. The results for various test cases are presented.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.541-547
• /
• 2000

This paper presents the closed-form forward kinematics of the 6-6 Stewart platform of planar base and moving platform. Based on algebraic elimination method and with one extra linear sensor, it first derives an 8th-degree univariate equation and then finds tentative solution sets out of which the actual solution is to be selected. In order to provide more exact solution despite the error between measured sensor value and the theoretical one, a correction method is also used. The overall procedure requires so little computation time that it can be efficiently used for realtime applications. In addition, unlike the iterative schemes e.g. Newton-Raphson, the algorithm does not require initial estimates of solution and is free of the problems that it does not converge to actual solution within limited time. The presented method has been implemented in C language and a numerical example is given to confirm the effectiveness and accuracy of the developed algorithm.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1384-1390
• /
• 2001

This paper deals with the forward kinematics of the 6-6 Stewart platform of planar base and moving platform using one extra linear sensor. Based on algebraic elimination method, it first derives an 8th-degree univariate equation and then finds tentative solution sets out of which the actual solution is to be selected. In order to provide more exact solution despite the error between measured sensor value and the theoretic alone, a correction method is also used in this paper. The overall procedure requires so little computation time that it can be efficiently used for real-time applications. In addition, unlike the iterative scheme e.g. Newton-Raphson, the algorithm does not require initial estimates of solution and is free of the problems that it does not converge to actual solution within limited time. The presented method has been implemented in C language and a numerical example is given to confirm the effectiveness and accuracy of the developed algorithm.

• 핵의학기술
• /
• 제18권1호
• /
• pp.49-61
• /
• 2014

인구의 고령화와 함께 골다공증성 척추압박골절 환자의 발병률은 매년 증가하는 추세이며 경피적 척추성형(percutaneous vertebroplasty, PVP)은 가장 많이 시행되는 표준화된 치료 방법이다. 시술 전 후의 정확한 진단평가에 있어 SPECT/CT 검사의 유용성이 우수하다는 연구 보고가 있으나 시술에 사용되는 골 시멘트(bone cement) 물질은 CT 영상에서 인공물(artifact)을 생성하여 영상품질에 영향을 미친다. 이에 본 연구에서는 골 시멘트가 SPECT/CT 영상에 미치는 영향을 평가하는 데 목적을 두었다. NEMA-1994 팬텀(phantom)에 배후방사능(3.6 kBq/ml), 열소(29.6 kBq/ml), 냉소(물)를 설정한 후 각 원통(cylinder)에 모형 시멘트를 삽입하여 영상 획득하였다. Astonish (Iterative: 4, Subset: 16)으로 재구성하였고, CT 보정 방법은 비감쇠보정(NAC), 감쇠보정(AC+SC-), 감쇠 및 산란보정(AC+SC+) 3가지 방법을 사용하였다. 각각의 보정방법에 따른 평균계수와 시멘트물질의 유 무에 따른 계수 변화율을 비교하고 대조도 회복 계수(contrast recovery coefficient, CRC)를 구했다. 또한, 압박골절 진단을 받은 환자 107명 중 PVP를 시행한 20명을 선별하여 추체를 골절, 정상, 시멘트로 나누고 연조직(척추기립근)을 포함 4곳의 평균 계수를 측정한 후, 뼈/연조직 간 계수 비(bone/soft tissue ratio, B/S ratio)을 구했다. NAC를 기준으로 AC+SC-, AC+SC+의 평균계수는 증가하였고, AC+SC-의 평균계수가 가장 높았으며, AC+SC+는 AC+SC-에 비해 상대적으로 낮았다. 시멘트 물질의 유 무에 따른 평균계수는 시멘트가 존재할 때 NAC, AC+SC-, AC+SC+에 따라 팬텀의 열소에서 12.4%, 6.5%, 1.5%, 냉소 75.2%, 85.4%, 102.9%, 배후방사능 13.6%, 18.2%, 9.1%, 임상영상의 골절부에서 33.1%, 41.4%, 63.5%, 정상부 53.1%, 61.6%, 67.7%, 연조직 10.0%, 4.7%, 3.6%의 증가율을 보였다. 반면 원통 내부의 시멘트 인접부에서 상대적 계수감소를 확인할 수 있었고, 병소에 대한 팬텀영상과 임상영상간의 계수 증가율은 상반된 양상을 보였다. 대조도 비를 나타내는 CRC와 B/S ratio는 NAC, AC+SC-, AC+SC+순으로 향상되었고, 팬텀의 냉소에서는 큰 변화 없이 일정하였다. 정량적 계수는 AC+SC-가, 대조도 비는 AC+SC+가 가장 높게 분석되었다. PVP 시행 환자의 척추 뼈 SPECT/CT 검사에서 AC+SC- 의 사용은 영상계수를 대폭 향상시켜 특히 병소의 농도가 높은 영상을 얻는 반면에 골 시멘트의 영향과 함께, 연부조직 및 산란영역의 영상잡음 계수까지 증가시키므로 대조도비를 향상시키는 AC+SC+의 적용을 병행한다면 임상진단에 유용할 것으로 사료된다.

• 대한환경공학회지
• /
• 제33권8호
• /
• pp.617-622
• /
• 2011

수질오염총량관리제는 유역에 설정된 목표수질을 달성하기 위해 허용부하량 이내로 오염물질의 배출량을 관리하기 위해 도입되었다. 그 동안 수질오염총량관리제를 시행해오면서 수많은 시행착오와 문제점들이 발생하여 이를 개선하기 위한 제도적, 기술적 보완이 이루어져 왔으나, 제도의 효율적인 시행을 위해 근본적인 개선이 필요한 실정이다. 따라서 본 연구에서는 수질오염총량관리제의 합리적 시행을 위한 개선방안을 새로운 시각에서 제시하고자 한다. 수질오염총량관리제의 시행에 있어 무엇보다도 먼저 지류하천의 수질 유량모니터링을 위한 대상하천의 규모, 측정시기, 항목 및 주기 등을 포함하는 시스템 구축을 통하여 모니터링을 수행하여야 한다. 모니터링 결과를 바탕으로 해당유역의 이수 및 생태목적에 맞도록 대상물질 및 목표수질을 설정하고, 전체유역을 대상으로 기본계획을 수립하여야 한다. 목표수질을 초과하는 유역만을 대상으로 수질 개선을 위한 시행계획을 수립하고, 시행계획에 따른 해당유역의 목표수질 만족여부를 주요내용으로 하는 이행평가를 매년 수행해야 한다. 최종적으로 해당유역에 설정된 목표수질을 만족하지 못하거나, 대상항목 또는 목표수질이 변경되면 동일한 순으로 절차를 반복하게 되고, 해당유역에 설정된 목표수질을 만족하면 해당유역의 수질오염총량관리제를 종료하면 된다.