• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.12 s.354
• /
• pp.1-8
• /
• 2006

In this paper, we propose carrier phase synchronization algorithm which are base on turbo coded system for DVB-RCS. There have been two categories of phase estimator, single estimator outside turbo code decoder and multiple estimators inside turbo code decoder. In single estimator, we use the estimation algorithm that ML(Maximum Likelihood) and LMS(Least Mean Square), also three different soft decision methods are proposed. Multiple estimator apply PSP(Per Survivor Processing) algorithm additionally. We compared performance between single estimator and Multiple estimator in AWGN channel. We presented the two methods of PSP algorithm for performance elevation. First is the Bi-directional channel estimation and second is binding method.

• ETRI Journal
• /
• v.40 no.3
• /
• pp.309-317
• /
• 2018

Single carrier-frequency-division multiple access (SC-FDMA) has been adopted as the uplink transmission standard in fourth-generation cellular networks to facilitate power efficiency transmission in mobile stations. Because multiuser multiple-input multiple-output (MU-MIMO) is a promising technology employed to fully exploit the channel capacity in mobile radio networks, this study investigates the uplink transmission of MU-MIMO SC-FDMA systems with orthogonal space-frequency block codes (SFBCs). It is preferable to minimize the length of the cyclic prefix (CP). In this study, the chained turbo equalization technique with chained turbo estimation is employed in the designed receiver. Chained turbo estimation employs a short training sequence to improve the spectrum efficiency without compromising the estimation accuracy. In this paper, we propose a novel and spectrally efficient iterative joint-channel estimation, multiuser detection, and turbo equalization for an MU-MIMO SC-FDMA system without CP-insertion and with short TR. Some simulation examples are presented for the uplink scenario to demonstrate the effectiveness of the proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11A
• /
• pp.1154-1163
• /
• 2007

For orthogonal frequency division multiplexing (OFDM), cyclic prefix (CP) should be longer than the length of channel impulse response. In order to prevent a loss of bandwidth efficiency due to the use of a CP, residual intersymbol interference cancellation (RISIC) method has recently been developed. In this paper, we first apply the RISIC algorithm to the space-time block coded (STBC) OFDM and the space-frequency block coded (SFBC) OFDM with insufficient CP. It is shown that in the STBC OFDM, tail cancellation as well as cyclic restoration of the RISIC should be repeated. Second, we propose iterative channel estimation method for the RISIC in the STBC OFDM system with insufficient CP. Based on the expectation-maximization (EM) algorithm, the proposed estimation method exploits the extrinsic probabilities of the channel decoder iteratively. The performance of the proposed method is evaluated by computer simulation in a multipath fading environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5305-5321
• /
• 2016

In wireless communication, the multiple-input multiple-output (MIMO) system is a well-known approach to improve the reliability as well as the data rate. In MIMO systems, channel state information (CSI) is typically required at the receiver to detect transmitted signals; however, in practical systems, the CSI is imperfect and contains errors, which affect the overall system performance. In this paper, we propose a novel maximum likelihood (ML) scheme for MIMO systems that is robust to the CSI errors. We apply an optimization method to estimate an instantaneous covariance matrix of the CSI errors in order to improve the detection performance. Furthermore, we propose the employment of the list sphere decoding (LSD) scheme to reduce the computational complexity, which is capable of efficiently finding a reduced set of the candidate symbol vectors for the computation of the covariance matrix of the CSI errors. An iterative detection scheme is also proposed to further improve the detection performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6A
• /
• pp.577-586
• /
• 2011

Modem digital communication systems are required to use forward error correction (FEC) codes to combat inevitable channel impairment. Turbo codes or low density parity check (LDPC) codes, using iterative decoding with soft decision detection (SDD) information, are the most common examples. The excellent performance of these codes should be conditioned on accurate estimation of soft decision detection information. In order to use FEC codes with iterative decoding for Multi-Input Multi-Output (MIMO) system, reliable soft decision channel gain should be provided. In this paper, we investigate efficient SDD methods for turbo-coded MIMO system, and derive the corresponding formulas of SDD for various MIMO detection schemes. We present simulation results of the derived SDD schemes for turbo-coded MIMO systems, and show that the presented results almost approximate to maximum likelihood detection performance with much less computational load.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.53-59
• /
• 2009

In multi-user MIMO systems, a base station transmits multiple data to multi-user simultaneously in order to improve performance and bandwidth efficiency. When the base station transmits multiple data to multi-user simultaneously, multi-user interference occurs severely. In this paper, we define a post-processing leakage as the total power leaked from desired user to all other users after combining at the output of each user. Using concept of the post-processing leakage, we also define a performance metric, the so called signal-to-post-processing-leakage-plus-noise ratio (SPPLNR). Assuming that the receiver is the minimum mean square error (MMSE) receiver, we propose an iterative SPPLNR-based beamforming that determines beamforming vectors and combining vectors by using an iterative method. The proposed scheme does not impose a condition on the relation between the number of transmit antennas for the base station and the number of receive antennas for users. Simulation results show that the proposed scheme outperforms a beamforming scheme perfectly eliminating the multi-user interference when channel estimation error exists.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.253-271
• /
• 2017

In this paper, considering that perfect channel state information (CSI) is hard to achieve in practice, the downlink capacity of distributed antenna systems (DAS) with imperfect CSI and multiple receive antennas is investigated over composite Rayleigh fading channel. According to the performance analysis, using the numerical calculation, the probability density function (PDF) of the effective output SNR is derived. With this PDF, accurate closed-form expressions of ergodic capacity and outage probability of DAS with imperfect CSI are, respectively, obtained, and they include the ones under perfect CSI as special cases. Besides, the outage capacity of DAS in the presence of imperfect CSI is also derived, and a Newton's method based practical iterative algorithm is proposed to find the accurate outage capacity. By utilizing the Gaussian distribution approximation, another approximate closed-form expression of outage capacity is also derived, and it may simplify the calculation of accurate outage capacity. These theoretical expressions can provide good performance evaluation for downlink DAS for both perfect and imperfect CSI. Simulation results verify the effectiveness of the theoretical analysis, and the system capacity can be improved by increasing the receive antennas, and decreasing the estimation error or path loss. Moreover, the system can tolerate the estimation error variance up to about 0.01 with a slight degradation in the capacity.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.9
• /
• pp.32-39
• /
• 2006

In this paper, an iterative subspace-based calibration algorithm for a CDMA-based antenna array in the presence of unknown gain and phase error is presented. The algorithm does not depend on the array geometry and does not require a prior knowledge of the Directions Of Arrival (DOA) of the signals. The method requires the code sequence of a reference user only. The proposed algorithm is based on the subspace method and root finding approach, and it provides estimates of the calibration vector, the DOA and the channel impulse response, by using the code sequence of a reference user. The performance of the proposed algorithm was investigated by means of computer simulations and was verified using field data measured through a custom-built W-CDMA test-bed. The data show that experimental results match well with the theoretical calibration algorithm. Also, teh study propose an efficient algorithm using the simulated annealing technique. This algorithm overcomes the requirement of initial guessing in the subspace-based approach.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.125-126
• /
• 2010

채널의 다중경로를 통과한 신호들은 지연확산 영향으로 심하게 왜곡이 되거나 Inter-Symbol Interference(ISI)가 발생하므로 왜곡된 채널을 추정하여 보상해야 한다. 기존 iterative 채널 추정 방식에서는 채널 시간 지연 길이 밖으로 zero padding함으로 노이즈 성분을 제거하는 알고리즘이다. 반면에 본 논문은 채널 시간 지연 길이 안으로 있는 노이즈 성분까지 노이즈 제거 문턱 값 추정(noise elimination threshold estimation: NETE) 알고리즘을 사용하여 노이즈를 효과적으로 제거한다. 시뮬레이션 결과는 채널의 mean square error(MSE)를 통하여 제안된 기법을 적용할 경우 채널 추정 성능 개선이 나타남을 확인할 수 있었다.

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.31-39
• /
• 2012

DVC(Distributed Video Coding) techniques have been attracting a lot of research works since these enable us to implement the light-weight video encoder and to provide good coding efficiency by introducing the feedback channel. However, the feedback channel causes the decoder to increase the decoding complexity and requires very high decoding latency because of numerous iterative decoding processes. So, in order to reduce the decoding delay and then to implement in a real-time environment, this paper proposes several parity bit estimation methods which are based on the temporal correlation, spatial correlation and spatio-temporal correlations between LDPCA frames on each bit plane in the consecutive video frames in pixel-domain Wyner-Ziv video coding scheme and then the performances of these methods are compared in fast DVC scheme. Through computer simulations, it is shown that the adaptive spatio-temporal correlation-based estimation method and the temporal correlation-based estimation method outperform others for the video frames with the highly active contents and the low active contents, respectively. By using these results, the proposed estimation schemes will be able to be effectively used in a variety of different applications.