• 한국식품과학회지
• /
• 제34권6호
• /
• pp.1057-1061
• /
• 2002

초임계 유체 추출법에 의해 감초의 triterpenoid saponin(glycyrrhizin)을 추출하기 위해 50 MPa, $60^{\circ}C$와 3mL/min의 조건에서 보조용매와 soaking의 효과를 알아보았다. 순수한 초임계 이산화탄소만을 이용하여 추출한 결과 감초의 glycyrrhizin은 거의 추출되지 않았다. 99.9% methanol, ethanol과 isopropanol을 보조용매로 초임계 이산화탄소에 첨가하여 추출한 경우, 추출수율의 상승에는 큰 영향을 미치지 아니하였다. 시료를 물로 soaking하여 90% methanol을 보조용매로 사용하여 초임계 이산화탄소에 의해 추출한 경우, soaking 용매의 사용량이 증가할수록 추출수율은 증가하였고, 최고 21.68mg/g(회수율 53.25%)의 수율을 보여주었다. 한편 시료의 soaking 없이 70% methanol을 보조용매로 사용하였을 때는 유기용매추출법에 의한 수율보다 더 높은 수율을 나타내었고, 시료를 물로 soaking하여 70% ethanol을 보조용매로 초임계 이산화탄소에 첨가하여 추출하였을 때, 추출수율과 추출속도는 상승하였고, 시료의 90%(w/w)에 해당하는 물로 시료를 soaking한 경우 70% methanol을 보조용매로 사용하였을 때와 거의 동일한 추출수율을 얻을 수 있었다.

• 한국결정성장학회지
• /
• 제14권5호
• /
• pp.187-192
• /
• 2004

We try to use isopropanol which has low boiling point to prepare ZnO thin films at low temperature. ZnO thin films were prepared by sol-gel spin-coating method using zinc acetate dehydrate-isopropanol-monoethanolamine (MEA) solution. The c-axis preferred orientation and optical properties of ZnO films with preheating temperature have been investigated. ZnO thin films were preheated at 200 to $300^{\circ}C$ with an interval of $25^{\circ}C$ and post-heated at $650^{\circ}C$. The ZnO film preheated at $275^{\circ}C$ and post-heated at $650^{\circ}C$ was highly oriented along c-axis (002) plane, and the surface with homogeneous and dense microstructures was formed having nano-sized grains. The optical transmittance was above 90 % in the visible range and exhibited absorption edges at 368 nm wavelength.

• 한국포장학회지
• /
• 제10권1호
• /
• pp.7-14
• /
• 2004

Migration behavior of selected solvents and food samples showed differences of the chemical structures and polarities, the food samples which have similar polar expresses more higher affinity than different polar degrees. Water which is polar has a highest partitioning coefficient values on polar isopropanol, and oil which is nonpolar has highest partitioning value on non-polar toluene. The increasing order of partitioning values was accord with increasing water contents in food samples. It is showed that the wheat flour with 13.2% moisture content has the highest partitioning coefficient values on the isopropanol with -OH. Kp value of sugar showed remarkable lower partitioning coefficient values than other food samples due to high degree crystallinity. This phenomenon can be predictable with ${\delta}$ values, because order of partitioning coefficient values which comes out through the experiment and the sequence of Hildebrand solubility parameter value difference between food sample and printing ink solvent correspond almost. This Hildebrand solubility parameter value can be easily applied to the food package industry because the effect of food-safety can be considered without passing through complicated steps by using this method.

• 분석과학
• /
• 제24권5호
• /
• pp.360-367
• /
• 2011

8개의 제약회사에서 제조되어 현재 시판되고 있는 10개의 나프록센에 대한 광학순도를 최적조건의 키랄 HPLC로 조사하였다. Chiralcel OD-H 칼럼과 ChiralHyun-LE(S)-1 칼럼을 키랄정지상으로 사용하였고, hexane:isopropanol:acetic acid 이 100:2.85:0.1로 혼합된 용액을 전개용매로 사용하였다. 대부분 시료의 광학순도는 97% 이상이었고, 하나는 95% 수준으로 나타났다. 이 값들에 대한 상대표준편차 평균은 0.034%로 매우 작게 나타났다.

• 폴리머
• /
• 제25권6호
• /
• pp.811-817
• /
• 2001

용매와 비용매의 다양한 비율에 따라서 bisphenol A polycarbonate(PC)의 무정형에서 결정성의 상변화를 확인하였다. 용매로 chloroform을, 비용매로 isopropanol을 사용하였다. 결정화된 PC는 광학현미경과 SEM, XRD, DSC를 이용하여 조사하였고, DSC와 XRD의 측정값은 PC의 결정화도를 판단하는데 이용하였다. 용해도 상수는 PC의 결정화도를 조절하는데 중요한 인자로 PC 결정화도 차이는 혼합용매의 용해도 상수 차이로 설명하였다. 용매와 비용매 비율이 75/25 wt%의 PC 용액에서 고결정화도를 가진 PC powder로 얻을 수 있었다. 이런 결과는 혼합용매의 용해도 상수(9.85)가 PC의 용해도 상수(9.9)와 유사하였기 때문이라고 판단된다.

• 펄프종이기술
• /
• 제42권4호
• /
• pp.64-70
• /
• 2010

In this study, hemicelluloses were pre-extracted from mixed hardwood chips using sodium hydroxide solution and then they were isolated from pre-extractives by using various solvents. Isolation was conducted by precipitating hemicelluloses with isopropanol, ethanol, 1,4-dioxane, dimethylsulfoxide (DMSO) and potassium hydroxide (KOH), respectively. The precipitate yield on alkali pre-extractives was the highest when hemicelluloses were isolated by DMSO and then precipitated with ethanol. Most precipitates were yellow colored. The efficiency of isolation was evaluated by analysing the characteristics of isolated hemicelluloses. Isolation using DMSO, KOH and 1,4-dioxane ($80^{\circ}C$) showed rather high efficiency. The highest total separation efficiency was about 77% when alkali pre-extractives were reacted with KOH and precipitated with ethanol. The quantity and purity of isolated hemicelluloses were affected by the solvent type.

• 멤브레인
• /
• 제11권2호
• /
• pp.89-95
• /
• 2001

상전환 공정을 이용하여 무기 fluor인 cerium activated yttrium silicate (CAYS)가 함침재로 존재하는 폴리설폰 고분자막을 제조하였다. CAYS가 포함된 제막용액을 물 또는 이소프로파놀의 비용매 욕조에 침지시켜 고형화시켰을 때, 막에 함침되는 CAYS는 침지용 비용매에 따라 뚜렷하게 다른 함침 특성을 나타냄으로써, 제막용액의 고형화 경로를 추적할 수 있는 역할을 하였다. 물욕조에 침지되어 고형화된 막에서 무기물인 CAYS가 고분자 구조에 달라붙은 형상을 보여준 반면, 이소프로파놀에 침지되어 형성된 막에서는 셀 같은 기공 부분에 모여있는 것이 확인되었다. 이러한 현상은 제막용액의 침지 과정에서 무기함침재들이 액체-액체 상분리에 형성된 고분자 희박지역으로 집중되었음을 확인시켜 주었다.

• Membrane and Water Treatment
• /
• 제8권5호
• /
• pp.483-498
• /
• 2017

Novel mixed matrix membranes of Sodium Alginate (NaAlg) were developed by the incorporation ofunmodified, modified Phosphomolybdic acid (PMA) then cross-linked with glutaraldehyde externally. These membranes were prepared by the solution casting technique. Pervaporation (PV) experiments have been performed with pure NaAlg, unmodified NaAlg-PMA5, NaAlg-PMA10, modified NaAlg-mPMA5, and NaAlg-mPMA10 (wt. % of PMA 5 and 10) at 30, 40 and $50^{\circ}C$, to separate water-isopropanol feed mixtures containing 10-30 wt. % of water. Pervaporation results of NaAlg-mPMA10 produced a highest separation factor of 9028 with a flux of $0.269kg/m^2.h$ for 10 wt. % of water containing feed mixture. Both separation factor and flux for water increased significantly with increasing content of mPMA into NaAlg; a significant improvement in PV performance was observed for NaAlg-mPMA5 and NaAlg-mPMA10 membranes when compared to pure NaAlg& PMA-5, PMA-10 membrane.

• Rapid Communication in Photoscience
• /
• 제2권3호
• /
• pp.68-71
• /
• 2013

Acetone sensitized photoadditions of isopropanol to (5R)-5-menthyloxy-2-(5H)-furanone were investigated in two different microflow reactor systems. Setup A employed a commercially available glass reactor under a UVB-panel. Setup B utilized a FEP microcapillary wrapped tightly around a Pyrex cylinder with a single UVB fluorescent tube at its center. The reactions under flow conditions were subsequently compared to analogue reactions conducted in a batch chamber reactor. Overall, the microflow systems gave faster conversions and higher isolated yields. The flexible microcapillary setup, however, showed the best performance and promise in terms of future scale-up and reactor optimization.

• 한국식품위생안전성학회지
• /
• 제14권1호
• /
• pp.76-83
• /
• 1999

Solid phase microextraction (SPME) was used for the determination of 6 standard solvents (methanol, isopropanol, methyl ethyl ketone, ethyl acetate, cyclohexane, toluene) in food packaging materials. SPME method is a solvent-free sample preparation technique in which a fused silica fiber coated with polymeric organic liquid is introduced into the headspace above the sample. SPME method using fiber coated polydimethylisiloxane (PDMS) was compared with static headspace (SHS) method used as a reference. It was found that the optimal adsorption condition using PDMS-SPME method was 2$0^{\circ}C$ for 15 minutes for the standard solvents. Detection limits, linearity, reproducibility and recovery of both SHS and PDMS-SPME methods have been determined using 6 standard solvents. Both methods were characterized by high reproducibility and good linearity. Using SHS methods, the mean recovery of the 6 standard solvents was ranged from 75.5% to 105.8% with a mean relative standard deviation (RSD) of 0.3% to 4.8%. With PDMS-SPME method, the mean recovery of the 6 standard solvents was ranged from 86.7% to 108.3% with a mean RSD of 0.4% to 2.5%. The detection limits of both methods were the same for toluene, cyclohexane and methyl ethyl ketone; those of PDMS-SPME method were higher than those of SHS method for methanol, isopropanol and ethyl acetate. PDMS-SPME fiber shoed excellent adsorption for non-polar solvents such as toluene, while it showed relatively low adsorption for polar solvents such as methanol.