• 대한화학회지
• /
• 제10권1호
• /
• pp.1-3
• /
• 1966

The organic yields (i.e. fraction of nuclear events resulting in organic compound formation) of the radioative neutron capture reactions of halogens in purified bromobenzene have been determined varying extraction time, at $100^{\circ}C$ for thermal effect, varying irradiation time, varying neutron flux and with additional U. V. irradiation. Among the important results are; (1) The organic yields show no remarkable fluctuations with time following neutron irradiation; (2) The organic yields show no change with thermal energy; (3) The organic yields of degassed samples are same in different length of irradiation time whereas the yields of the samples in open air appear to increase with increasing time of irradiation (4) The organic yields increase remarkably with increased neutron flux; (5) The organic yields show a sharp increase by additional U. V. irradiation after neutron irradiation.

• 동아시아식생활학회지
• /
• 제20권3호
• /
• pp.423-432
• /
• 2010

In order to streamline bread making process that is time-consuming in regard to the characteristics of process, this study focused on microwave irradiation to dough and raising its temperature to monitor potential variations of dough properties and bread quality, and also examined optimum irradiation time to deduce effective ways for streamlining bread making process. According to analyze dough properties depending on microwave irradiation time, it was found that microwave heat (MWH) 2 showed the highest specific volume and oven spring of all and the lowest hardness (i.e. the highest softness). Moreover, MWH 2 scored the highest points in overall preference under sensory characteristics. As a result, it found that 80-second heating of 700 g bread dough, when exposed to microwave irradiation, contributed to the highest quality of bread.

• 한국동물학회지
• /
• 제10권1호
• /
• pp.17-20
• /
• 1967

The present experiment was perform to investigate the frequencies of chromosome aberration with special regard to the chromosome groups and the various time intervals after X-irradiation (60 r) in ormal human foetus cells grown in culture. The cytological preparations were prepared at every 5 through 30 hours after X-irradiation by the air-drying method. 1. The frequencies of chormosome aberration are on the whole decreased as tie elapses after irradiation and this is thought to be due to gradual recovery with time . However, a slight increase in frequencies is observed at 25 and 30 hours after irradiation respectively. This shows that the cells at the these periods are more sensitivity to X-irradation , and those cells are thought to be at G$_2$ and late S stage at the time of irradiation respectively, so t is evident that G$_2$ and late S stages a the time of irradiation respectively , so it is evident that G$_2$ and late S stages are more sensitive to X-irradiation than any other stages. 2. The frequencies of chormosome aberration are decreased in descending order of chormosome group number. The differences among these frequencies are highly significant statistically . Therefore it can be concluded that there is a highly significant difference in radiosensitivity among chromosome groups. that is, the chromosomes of the group A are the most radiosensitive , followed by B, C, D ,E and G in descending order.

• Mass Spectrometry Letters
• /
• 제10권3호
• /
• pp.79-83
• /
• 2019

Horse heart myoglobin (MYG) and bovine serum albumin (BSA) were hydrolyzed by microwave-assisted weak-acid hydrolysis for 10, 20, 30, 40, 50, and 60 min using 2% formic acid (FA) at $100^{\circ}C$. Generally, the number of identified peptides increased with increasing irradiation time, indicating that the duration of microwave irradiation is linked to the efficiency of hydrolysis. For MYG, irradiation for 60 min provided the highest number of identified peptides, the greatest sequence coverage values and the highest MASCOT score values among the investigated irradiation times. Irradiation of BSA for 50 min, however, yielded a greater number of peptides than irradiation for 60 min due to the generation of miscleaved peptides after microwave irradiation for 50 min.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.501-506
• /
• 2022

Long turn-off time limits high frequency operation of Bipolar Junction Transistors (BJTs). Turn-off time decreases with increases in the recombination rate of minority carriers at switching transients. Fast neutron irradiation on a Si BJT incurs lattice damages owing to the displacement of silicon atoms. The lattice damages increase the recombination rate of injected holes with electrons, and decrease the hole lifetime in the base region of pnp Si BJT. Fast neutrons generated from a beryllium target with 30 MeV protons by an MC-50 cyclotron were irradiated onto pnp Si BJTs in experiment. The experimental results show that the turn-off time, including the storage time and fall time, decreases with increases in fast neutron fluence. Additionally, it is confirmed that the base current increases, and the collector current and base-to-collector current amplification ratio decrease due to fast neutron irradiation.

• 반도체디스플레이기술학회지
• /
• 제6권1호
• /
• pp.65-69
• /
• 2007

A design of experiments was applied in order to investigate the effect of processing variables in UV irradiation on the electrical/optical properties in indium-zinc oxide thin films, The processing variables, equivalently input variables are listed as UV irradiation time, oxygen flow rate, and chamber pressure. The statistical significance of Ultra Violet (UV) treatment was confirmed using a paired-t test. The full factorial $2^3$ design was employed to determine significant main and interaction effects in UV irradiation process. The chamber pressure and the interaction between UV irradiation time and $O_2$ flow rate were found to be statistically significant at the significance level of 0.1. Furthermore, the optimized approach was proposed in achieving the improved conductivity after UV irradiation.

• Nuclear Engineering and Technology
• /
• 제38권6호
• /
• pp.585-590
• /
• 2006

This paper describes the results of an irradiation test and the specifications of the pneumatic transfer system (PTS) in the NAA #3 irradiation hole at the HANARO research reactor, which was reinstalled after some modifications of the operation mode at the end of 2004. The outer and inner diameters of the PE transfer tube are 34.1 and 27.5 mm, respectively. PE rabbit was used for sample irradiation. The $N_2$ gas pressure of the PTS lines was adjusted to 0.75 bar. The average sending time to the reactor was $8.5{\pm}0.3$ s and the average receiving time back to the receiver was $3.2{\pm}0.2$ s. The internal and external temperature of the irradiation tube was measured in a range of 50 to $80^{\circ}C$ for a 40 s to 80 s irradiation time, respectively. The optimum irradiation time was estimated to be less than 80 s. The thermal, epithermal and fast neutron flux at 30 MW thermal power were $1.42{\pm}0.01{\times}10^{14},\;1.51{\pm}0.04{\times}10^{13}$ and $9.48{\pm}0.69{\times}10^{11} n{\cdot}cm^{-2}{\codt}s^{1-}$, respectively. The cadmium ratio was approximately 9.40. The data obtained will be applied to supplement user information and for reactor management.

• Journal of Biosystems Engineering
• /
• 제21권1호
• /
• pp.21-33
• /
• 1996

This study was to obtain basic information needed to develop the effective weed control method for the production of less polluted agricultural products by inducing viability loss of weed seeds in soil with infrared irradiation. Ceramic plates were heated by LPG with the aid of forced air and the infrared produced from plates was used as the heat source for heating soil. The soil heated in this study was sandy loam with four levels of moisture contents (0.5, 5.1, 9.1, 15.0% wb). The temperature distribution was measured at various soil depths when soil was irradiated with infrared for different irradiation time (30, 60, 90 sec). The soil depths with duration time of minimum 3 minutes over $80^circ C$, temperature inducing viability loss of weed seeds, were investigated. When the moisture content of soil was 0.5% and 5.1% wb, the soil depths which can induce viability loss of weed seeds was greatly increased with increasing irradiation time. When 30 seconds of irradiation time was applied on soil with moisture content of 9.1% or 15.0% wb, any depths of soil tested in this study was not reached to the temperature of 8$0^{\circ}C$. Generally, the soil depth being needed for viability loss of weed seeds was decreased with increasing moisture content of soil.

• 태양에너지
• /
• 제5권2호
• /
• pp.28-34
• /
• 1985

There are two kinds of irradiation intensity deviation, depending on time and position, on illuminated plane when thermal performance of solar collector is tested by using solar simulator. In this study we measured only position deviation of irradiation intensity using 45-cds photosensors and data acqusition system and found the point of average value. By this result we can improve the accuracy of irradiation measurement in indoor test of solar collector.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1457-1461
• /
• 2013

The effect of liquid crystal (LC) alignment on a homeotropic polyimide (PI) surface induced by ion beam (IB) irradiation and rubbing process was studied. LC alignment was not affected by IB irradiation with an exposure time of 10 s, and an IB irradiation with an exposure time of 60 s more effectively oriented the LCs on the PI layer than the rubbing process. It was assumed that the LC alignment depended on the C-O bonds created from the C=O bonds on the PI surface broken by IB irradiation after an exposure time of 60 s, which resulted in a strong surface energy that transformed the homeotropic LC alignment to homogeneous states.