• 대한수의학회지
• /
• 제30권4호
• /
• pp.407-412
• /
• 1990

This study was designed to elucidate the effects of administration with dietary iron and fat-free diet on the contents of unsaturated fatty acid in phospholipid molecules, vitamin E contents and malondialdehyde contents in liver, kidney, muscle and testis of the male rats. The rats were divided into 3 experimental groups, namely, control, iron injection and fat-free diet administration groups. The control group was fed with normal diet, iron injection group injected intraperitoneally 20mg of ferric hydroxide/100g of body weight 20 times every 3 days and fat-free diet group administered lipid extraction diet with hexane in normal diet. All experimental groups were maintained for 60 days with feeding on the respective ration. The results obtained were summarized as follows: 1. In the mean contents of unsaturated fatty acid in phospholipid of liver, kidney, muscle and testis among groups, control group was 21.31mg/g, 19.38mg/g, 1.67mg/g, 13.68mg/g, iron injection group was 13.83mg/g, 16.53mg/g, 0.71mg/g, 10.11mg/g and fat-free diet group was 21.07mg/g, 19.38mg/g, 1.49mg/g and 13.40mg/g, respectively. 2. In the mean contents of vitamin E in liver, kidney, muscle and testis among groups, control group was 6.77mg/g, 1.93mg/g, 0.12mg/g, 0.17mg/g, iron injection group was 3.16mg/g, 0.86mg/g, 0.07mg/g, 0.09mg/g and fat-free diet group was 7.41mg/g, 1.50mg/g, 0.11mg/g and 0.16mg/g, respectively. 3. In the mean contents of malondialdehyde in liver, kidney, muscle, testis and serum among groups, control group was 11.29nM/0.1g, 23.25nM/0.1g, 42.47nM/0.1g, 7.01nM/0.1g, 4.33nM/ml, iron injection group was 34.98nM/0.1g, 40.55nM/0.1g, 72.21nM/0.1g, 12.26nM/0.1g, 11.27nM/ml and fat-free diet group was 8.07nM/0.1g, 20.63nM/0.1g, 39.92nM/0.1g, 6.95nM/0.1g and 4.27nM/ml, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.87-88
• /
• 2006

It is needed several large reservoirs and long time in order to remove suspended solid like steel fines and iron oxide at steel making factory. If removing rate of suspended solid in rolling coolant is improved, the productivity of working process can be increased and the area of reservoir can be reduced. Pre-treatment to add extra magnetization of suspended solid was studied Iron hydroxide and electrolytic dissociation were used for pretreatment. High gradient magnetic separation (HGMS) system was used for removing of magnetized suspended solid. Removing ratio showed over than 99% in the coolant containing magnetic fines. Magnetic properties of suspended solid were investigated after mixed with Al2(SO2)3 and organic flocculant by using electrochemical treatment.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권1호
• /
• pp.67-77
• /
• 2013

To improve the energy efficiency of conventional thermal treatment, soil remediation with microwave has been studied. In this study, the remediation efficiency of contaminated soil with semi-volatile organic contaminants were evaluated with microwave oven and several additives such as water, formic acid, iron powder, sodium hydroxide (NaOH) solution, and activated carbon. For the experiment, loamy sand and sandy loam collected from Imjin river flood plain were intentionally contaminated with hexachlorobenzene and phenanthrene, respectively. The contaminated soils were treated with microwave facility and the mass removals of organic contaminants from soils were evaluated. Among additives that were added to increase the remediation efficiency, activated carbon and NaOH solution were more effective than water, iron powder, and formic acid. When 10 g of hexachlorobenzene (142.4 mg/kg-soil) or phenanthrene (2,138.8 mg/kg-soil) contaminated soil that mixed with 0.5 g iron powder, 0.5 g activated carbon and 1 ml 6.25 M NaOH solution were treated with microwave for 3 minutes, more than 95% of contaminants were removed. The degradation of hexachlorobenzene during microwave treatments with additives was confirmed by the detection of pentachlorobenzene and tetrachlorobenzene. Naphthalene and phenol were also detected as degradation products of phenanthrene during microwave treatment with additives. The results showed that adding a suitable amount of additives for microwave treatments fairly increased the efficiency of removing semi-volatile soil organic contaminants.

• 한국환경과학회지
• /
• 제21권6호
• /
• pp.667-676
• /
• 2012

This research investigated to reduce mass of heavy metals in AMD(acid mine drainage) by microbial mats formed on the channel bed. As, Cd, Cu, Fe, Mn and Zn components were monitored in water and microbial mats, at three points (AMD1, AMD2 and AMD3), in a total of six times. Average daily discharge mass of heavy metals was highest in July, Fe component contained more than 76% of total discharge mass. Discharge mass of heavy metals of AMD and heavy metal contents in microbial mats decreased with downstream at channel. Heavy metal components that average daily discharge mass is over 0.5 kg were Fe, Cu and Zn, and they were highest in July. Average removal efficiency of heavy metals in AMD was highest about 21% in Fe, this microbial mats were due to form from precipitation of Fe component in AMD by aerobic iron bacteria. Relative content for As component in microbial mats than AMD was over 16 times, this As components were due to absorb at iron oxide and iron hydroxide on the surface of microbial mats.

• 자원리싸이클링
• /
• 제2권2호
• /
• pp.1-8
• /
• 1993

부선법에 의하여 폐수속에 함유되어 있는 철이온을 제거하기 위한 몇가지 효과적인 포수제와 최적 조건들을 알아본 실험의 결과를 요약하면 다음과 같다. 음이온 포수제인 sodium lauryl sulfate에 의해서 2가와 3가 철은 각각 pH 7과 6에서 효과적으로 제거되었다. 음이온 호수제인 aeropromotor 845에 의해서 2가와 3가철은 모두 pH pH 10~11영역에서, 3가철은 pH4~10영역에서 효과적으로 제거되었따. 따라서, 2가와 3가철은 2가와 3가 철이온침전점 이상으로 단순히 용액의 pH값을 조절하여 수산화철 침전으로 만든 다음 부선법에 의하여 효과적으로 제거된다고 할 수 있다. 그때의 효과적은 pH 조절제는 NaOH와 $Na_2CO_3$였고, 효과적인 포수제는 aeropromotor 845와 trimetyl dodecyl ammomum chloride 이었다.

• 자원리싸이클링
• /
• 제28권5호
• /
• pp.51-59
• /
• 2019

폐니켈-카드뮴전지 내의 니켈과 카드뮴을 분리하기 위한 재활용 기술 중 황산암모늄($(NH_4)_2SO_4$)을 이용하여 니켈을 침전시킴으로써 분리하는 기술이 보고되고 있어, 실제 산업현장에서 사용 중인 침출액을 이용하여 pH, 온도, 황산암모늄의 투입량 등을 변수로 하여 최적의 니켈 회수 조건을 도출하였다. pH의 경우 중성, 염기성에 비해 산성의 침출액에 황산암모늄을 투입했을 때 안정적인 황산니켈암모늄($(NH_4)_2Ni(SO_4)_26H_2O$)이 형성되었으며, 침출액의 온도는 $60^{\circ}C$일 때 가장 높은 순도를 나타내었다. 황산암모늄의 투입량은 니켈 함량 대비 2배의 몰 비로 투입했을 때 높은 회수율과 가장 적은 불순물 함량을 나타내었다. 서로 다른 두 공정을 통한 수산화니켈 제조 결과, 황산니켈암모늄 이용 시 카드뮴이 1.4% 검출되었고 황화나트륨($Na_2S$)을 이용하여 카드뮴을 제거한 용액에서 수산화니켈 제조 시에는 침출액 내 포함되어 있던 철과 니켈이 동시에 석출되었다. 본 연구를 통해 황산암모늄을 이용한 니켈 회수가 유용한 재활용 기술이 될 수 있을 것으로 사료된다.

• 한국세라믹학회지
• /
• 제24권3호
• /
• pp.215-222
• /
• 1987

${\alpha}$-Ferric Hydrous Oxide and ${\alpha}$-Ferric Oxide were obtained as following processes that Ferric Nitrate solution was adjusted to pH 6-8 with Ammonium Hydroxide, refluxed the Iron precipitate for 1 hr. at 80$^{\circ}C$, washed it with water and Methanol (95%), dried it to obtain ${\alpha}$-Ferric Hydrous Oxide at 60$^{\circ}C$, and then heated in atmosphere to prepare ${\alpha}$-Ferric Oxide for 1 hr. at 450$^{\circ}C$. Mica particles cleaned with ultrasonicator (45KHz) in water were mixed with Ferric Nitrate solution and treated it to adsorb ${\alpha}$-Ferric Oxide on the surface of mica particles by using the abovementioned processes, but the heated temperature was at 500$^{\circ}C$. The maximum wavelength of reflected light on the surface of mica-${\alpha}$-Ferric Oxide (50%) was appeared at 546nm but -Ferric Oxide free mica only was at 436 nm. The maximum wavelength was shifted to longer when the weight ratios of ${\alpha}$-Ferric Oxide to mica was changed from 1% to 50%.

• 한국의류산업학회지
• /
• 제5권1호
• /
• pp.82-88
• /
• 2003

This study was carried out to investigate combination dyeing of the cationized cotton with natural colorants extracted from Gardenia and Sappan wood extract using methanol. To improve dyeing properties of cotton with natural dye, cotton fabric was preheated with cationizing agent containing chlorohydrine group in aqueous solution of sodium hydroxide. On the whole the various medium colors were developed by repeat dyeing with different colorants after dyeing with one colorant in case of natural dyeing, In this study, however in order to obtain various colors on cationized cotton fabrics with natural dyes, pre-mordanting and combination dyeing were carried out. The various colors were obtained according to various metal compounds for pre-mordants and various mixing portion of Gardenia and Sappan wood. Metal compounds containing alum, copper and iron were used for pre-mordants.

• Journal of Microbiology and Biotechnology
• /
• 제14권4호
• /
• pp.653-657
• /
• 2004

The cold resistant mutants of P. fluorescens strain $PRS_{9}$ and ATCC13525 were developed which could grow equally well at $28^{\circ}C$ and $10^{\circ}C$. All the mutants were tested for siderophore production, of which $CRPF_9$ (ATCC13525 mutant) was selected, as there was a 16.8-fold increase when compared to its wild-type. Under in vitro conditions, $CRPF_9$ showed better growth promotion both in wheat (29.1% increase in root length) and mung bean (51.5% increase in root length) at $10^{\circ}C$. Greenhouse trials showed a significant increase in root (13.84cm) and shoot (15.0cm) length of $CRPF_9$-treated mung bean seeds, indicating increased rhizocompetence of the mutant. Ferric citrate was a better iron source than ferric hydroxide for plant growth.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.13-16
• /
• 2005

Laboratory and field experiments were conducted to study the effectiveness of five adsorbents for the removal of arsenic. The adsorbents included activated alumina (AA), iron coated AA (ICAA), and granular ferric hydroxide (GFH), granular ferric oxide (GFO), and granular titanium dioxide (GTD). Laboratory experiments were conducted to investigate arsenic removal using challenge water prepared in accordance with NSF International Standards 53 (ANSl/NSF 53-2001). Field experiments were conducted using arsenic-contaminated groundwater In laboratory experiment, the treatment capacity decreased in the following order GTD > GFO > GFH. In contrast, the treatment capacity decreased in the following order GFO > GTD > GFH > ICAA > Ah in field experiments.