• Journal of Soil and Groundwater Environment
• /
• v.13 no.1
• /
• pp.24-31
• /
• 2008

Sulfate reducing bacteria (SRB) is universally distributed in the sediment, especially in marine environment. SRB reduce sulfate as electron acceptor to hydrogen sulfide in anaerobic condition. Hydrogen sulfide is reducing agent enhancing the reduction of the organic and inorganic compounds. With SRB, therefore, the degradability of organic contaminants is expected to be enhanced. Ferrous iron reduced from the ferric iron which is mainly present in sediment also renders chlorinated organic compounds to be reduced state. The objectives of this study are: 1) to investigate the reduction of TCE by hydrogen sulfide generated by tht growth of SRB, 2) to estimate the reduction of TCE by ferrous iron generated due to oxidation of hydrogen sulfide, and 3) to illuminate the interaction between SRB and ferrous iron. Mixed bacteria was cultivated from the sludge of the sewage treatment plant. Increasing hydrogen sulfide and decreasing sulfate confirmed the existence of SRB in mixed culture. Although hydrogen sulfide lonely could reduce TCE, the concentration of hydrogen sulfide produced by SRB was not sufficient to reduce TCE directly. With hematite as ferric iron, hydrogen sulfide produced by SRB was consumed to reduce ferric ion to ferrous ion and ferrous iron produced by hydrogen sulfide oxidation decreased the concentration of TCE. Tests with seawater confirmed that the activity of SRB was dependent on the carbon source concentration.

• Korean Journal of Food Science and Technology
• /
• v.19 no.1
• /
• pp.23-28
• /
• 1987

The effects of phosphatidyl choline (PC), phosphatidyl ethanolamine (PE), phosphatidyl inositol (PI), phosphatidic acid (PA), phosphatidyl glycerol (PG), and cardiolipin (CL) on the flavor stability of purified soybean oil were studied. Purified soybean oil obtained from soybean oil by silicic acid chromatography does not contain measurable iron, tocopherols and phospholipids. Three hundred ppm of PC, PE, PI, PA, PG, or CL was added to the purified soybean oil, with and without 1ppm ferrous iron added. The flavor stability of sample, which was stored at $60^{\circ}C$ for 10 days in dark oven, was determined by a combination of volatile compounds formation and molecular oxygen disappearence in the headspace of air-tightly sealed serum bottle every 48 hrs. Results showed that, in general, phospholipids worked as prooxidant in the pufified soybean oil without ferrous iron added, and worked as antioxidant in the oil, when added 1ppm ferrous iron. The results also suggest that phospholipids work as prooxidant by increasing the solubility of oxygen on the surface of oil, and work as antioxidant in the oil containing 1 ppm ferrous iron by chelating iron. The results showed that PE and PA are better antioxidants than PC and PG. CL and PI showed the lest antioxidant activities in the oil will 1ppm ferrous iron added.

• Journal of Nutrition and Health
• /
• v.15 no.3
• /
• pp.171-180
• /
• 1982

The nutritional survey and blood sampling was conducted from May 23 to 27, 1971, in order to investigate the state of the nutritional intake in relation to blood contents of rural women. This survey covered a total of 47 women residing in Youngam-gun, Cholla-namdo, Korea. The daily diet of these subjects was observed by 24-hour recall method and weighing method for 3 days and hemoglobin (Hb), hematocrit(Hct), mean corpuscular hemoglobin concentration (MCHC), serum protein, serum albumin, A/G ratio, serum iron, total iron binding capacity (TIBC), transferrin saturation (TS), serum cholesterol and blood specific gravity (SG) were measured. The results were summarized as follows ; The rate of intake of vegetable foods was high, especially cereals, and that of animal foods was low, especially eggs and milk and milk products. The daily intake of niacin was sufficient, and the intakes of energy and iron were also tend to be adequate. On the contrary, the intakes of vitamin A, $B_2$ and C, calcium and protein were insufficient. The mean red blood cell number was $410.8{\pm}26.4{\times}10^{4}/mm^{3},$ the mean values of Hb, Hct and MCHC were $12.5{\pm}0.9gm%$, $37.5{\pm}2.4%$ and $33.2{\pm}0.5%$ thus the anemic prevalences were 21.3%, 12.8% and 93.6% comparing with the anemic criteria of WHO. The levels of serum protein and serum albumin were $7.1{\pm}0.4gm\;%$ and $4.3{\pm}0.3gm\;%$so the A/G ratio was indicated $1.6{\pm}0.2.$. The levels of serum iron and TIBC were $91.9{\pm}27.5{\mu}g/100ml and $297.5{\pm}31.4{\mu}g/100ml,$ so TS was calculated $31.2{\pm}9.7\;%$. The mean value of SG was $1.044{\pm}0.002,$ and the level of serum cholesterol was $164.3{\pm}25.4mg/dl$. In the relation between each of bloood content, Hb showed positive correlation not only with Hct but also protein at the level of significance of 1 per cent and 5 per cent, and protein also showed a positive correlation with serum cholesterol at the 1 per cent level of significance. In the relation between the nutrient intake and blood contents, vitamin C intake showed a positive correlation with Hb, serum protein and serum iron at the level of significance of 1 per cent, iron intake also showed a positive correlation with serum iron and serum cholesterol at the same significant level, and protein intake showed a positive correlation with serum iron at the at the level of significance of 5 per cent.

• Clean Technology
• /
• v.15 no.3
• /
• pp.194-201
• /
• 2009

Reductive reactivity of zero-valent iron nanoparticles was investigated for removal of nitrate-nitrogen which is considered one of the major water pollutants. To elucidate the difference in reactivity between preparation methods, iron nanoparticles were synthesized respectively from microemulsion and aqueous solution of ferric ions. Iron nanoparticles prepared from microemulsion were deposited on aluminum by electrophoretic method, and their reaction kinetics was compared to that of the same nanoparticles suspended in aqueous batch reaction. With an approximation of pseudo-first-order reaction, rate constants for suspended nanoparticles prepared from microemulsion and dilute aqueous solution were $3.49{\times}10^{-2}min^{-1}$ and $1.40{\times}10^{-2}min^{-1}$, respectively. Iron nanoparticles supported on aluminum showed ca. 30% less reaction rate in comparison with the identical nanoparticles in suspended state. However, supported nanoparticles showed the superior effectiveness in terms of nitrate-nitrogen removal per zero-valent iron input especially when excess amounts of nitrates were present. Iron nanoparticles deposited on aluminum maintained reductive reactivity for more than 3 hours, and produced nitrogen gas as a final reduction product of nitrate-nitrogen.

• Journal of Magnetics
• /
• v.16 no.2
• /
• pp.177-180
• /
• 2011

0.30 mm thick and 90 mm wide thin foils made of Fe-6.5wt.%Si alloy were successfully fabricated by traditional rolling. The as-rolled sheets had good shapes and shining metal luster. The effects of annealing temperature on the magnetic properties of the sheets were investigated. Excellent Dc properties ($H_c$: 11.55 A/m, ${\mu}_m$: 23710, and $B_s$: 1.439 T) were obtained at an annealing temperature of 1453 K for 1.5 h. At low frequencies ($\leq$ 1 kHz), heat treatment temperature has little effect on iron loss which remained at the level of 9.8 W/kg. Annealing at 1273 K for 1.5 h is optimum for frequencies above 5 kHz.

• Journal of the Korean Chemical Society
• /
• v.68 no.2
• /
• pp.82-86
• /
• 2024

This paper presents the solid-state synthesis of insoluble Prussian blue (Fe₄[Fe(CN)₆]₃·xH₂O, PB) in a ball mill, utilizing the fundamental components of PB. Solid-state synthesis offers several advantages, such as being solvent-free, quantitative, and easily scalable for industrial production. Traditionally, the solid-state synthesis of PB has been limited to the reaction between iron(II/III) ions and hexacyanoferrate(II/III) complex ions, essentially an extension of the solution-based coprecipitation method to solid-state reaction. Taking a bottom-up approach, a reaction is designed where the reactants consist of the basic building blocks of PB: Fe²⁺ ions and CN^- ions. The reaction, with a molar ratio of Fe²⁺ and CN^- corresponding to 1:2.8, yields PB, while a ratio of 1:6.6 results in a mixture of potassium hexacyanoferrate(II) (K₄Fe(CN)₆), potassium chloride (KCl), and potassium cyanide (KCN). This synthetic approach holds promise for environmentally friendly methods to synthesize multimetallic PB with maximum entropy in nearly quantitative yield.

• Journal of Environmental Health Sciences
• /
• v.29 no.1
• /
• pp.28-33
• /
• 2003

This study was carried out to treat sewage using sand trench combined with septic tank process in rural areas. In order to find optimum parameters, design and operation mode was changed from Run 1 to Run 4. In order to facilitate nitrification and T-P removal, diffuser and iron plate was installed in the 3rd trench of Run 2 period. The septic tank played a role as pre-application process of sand trench system. The removal efficiencies of COD, NH$_4$-N, T-P at steady state were 94.6%, 87.9% and 54.5%, respectively. Addition of diffuser and iron plate in the 3rd trench has increased the removal efficiencies of the NIL-N and T-P. In this system, denitrification were not occurred because of the high DO.

• Journal of the Korean Ceramic Society
• /
• v.27 no.1
• /
• pp.109-117
• /
• 1990

Magnetite for Water-based ferrofluid was synthesized by air oxidation of aqueous suspension in the pH range 7-12 at $65^{\circ}C$. The optimum condition of magneite formation was delineated by examining various physicochemcial properties such as Fe2+ content, phase characteristics, MHC and $\sigma$max. The point of zero charge of iron oxide powders obtained at various pH conditions were correlated with the oxidation state of Fe in the iron oxide. The magnetite powder prepared at pH 9 ws dispersed using sodium oleate and sodium dodecylbenzenesulfonate (SDBS) as dispersants, and the dispersion characteristics of the magnetite ferrofluid were examined by means of the fraction of solid dispersed, zeta potential data and FT-IR spectrum. A simple calculation on the potential energy of two interacting magnetite particles showed that the dispersion stability was directly correlated with height of the potential energy barrier or the shape of zeta potential.

• The Korean Journal of Ceramics
• /
• v.1 no.2
• /
• pp.75-80
• /
• 1995

Development of phases, evolution of microstructures, and dielectric response characteristics of amorphous lead iron tungstates during crystabllization were investiageted. A series of mircographs showing the evolution sequence of microstructures is presented. Crystallization was observed to initiate from inside of the amorphous material. A cubic perovskite phase developed fully at $760^{\circ}C$ from amorphous state via intermediate metastable crystalline structures. Dielectric constant of amorphous PFM was totally insensitive to the temperature change around the Curie temperature of crystalline material. Sintered pellet, with relative density of 96% and an almost pore-free dense internal microstructure, could be prepared from amorphous powder.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.91.2-91.2
• /
• 2012

The TiB2-reinforced iron matrix nanocomposite (Fe-TiB2) was in-situ fabricated from titanium hydride (TiH2) and iron boride (FeB) powders by a simple and cost-effective process that combines the mechanical activation (MA) and a subsequent heat treatment (HT). Effect of milling factors and synthesized temperatures on the formation of the nanocomposite were presented and discussed. A differential thermal analyser (DSC-TG) was employed for examination of thermal behavior of MAed powders. Phases of the nanocomposite were confirmed by X-ray diffraction analysis (XRD). The morphologies and microstructure of nanocomposite were investigated by field emission-scanning electron microscopy (FE-SEM) and energy-dispersive X-ray spectroscopy (EDS). Phase composition and distribution were analyzed by electron probe X-ray microanalysis (EPMA). Results showed that TiB2 particles formed in nanoscale were uniformly distributed in alloyed Fe matrix.