• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.8
• /
• pp.1139-1147
• /
• 2006

This study was conducted to evaluate the trace elemental nutritive values of soil and forages collected from southwestern part of the province of Punjab, Pakistan. Soil and forage samples were collected fortnightly for two seasons. The concentrations of some trace minerals varied greatly among seasons and sampling periods. Seasonal effects were found in all soil micro-minerals except zinc, while forage iron, zinc, and selenium were affected by seasonal changes. Sampling periods effects were observed in all soil minerals and in forage copper, iron, zinc, and manganese only. All soil mineral levels except cobalt and selenium were sufficiently high to meet the requirements of plants for normal growth during both seasons. In contrast, soil Co and Se levels were severely deficient during both seasons and considered inadequate for plant growth. Soil Fe, Zn, Co, and Se levels were higher, and Cu and Mn lower during winter than those during summer. Forage Zn levels during summer were at marginal deficient levels, and in contrast, all other forage micro-minerals were within the required range for ruminants during both seasons. Although forage mico-minerals were within the range required by the ruminants, they were not sufficiently high to prevent the predisposition to various diseases caused by nutrient deficiency. Consequently, grazing animals at this location need continued mineral supplementation of these elements with a mixtures of high bio-availability rather than of high micro-mineral contents to support optimum ruminant productivity.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.2
• /
• pp.193-200
• /
• 2010

This study evaluated treatability of soluble Mn(II) using multifunctional sand media simultaneously coated with iron and manganese. In the preparation of IMCS(Iron and Manganese Coated Sand), 0.05 M Mn(II) solution and Fe(III) solution was mixed with sand at pH 7. The mineral type of IMCS was identified as the mixture of ${\gamma}-MnO_2$, goethite and magnetite($F_{e3}O_4$). The contents of Mn and Fe coated onto sand were 826 and 1676 mg/kg, respectively. The $pH_{pzc}$ of IMCS was measured as 6.40. The removal of soluble Mn(II) using IMCS and oxidants such as NaOCl and $KMnO_4$ was investigated with variation of the solution pH, reaction time and Mn(II) concentration in a batch test. The removal of Mn(II) on IMCS was 34% at pH 7.4 and the removals of Mn(II) on IMCS in the presence of NaOCl(13.6 mg/L) at pH 7 and $KMnO_4$(4.8 mg/L) at pH 7.6 were 96% and 89%, respectively. The removal of Mn(II) using IMCS and oxidants followed a typical cationic type, showing a gradual increase of removal as the solution pH increased. The removal of Mn(II) was rapid in the first 6 hrs and then a constant removal was observed. The maximum removed amount of Mn(II) on IMCS-alone and IMCS in the presence of oxidants such as NaOCl(13.6 mg/L) and $KMnO_4$(4.8mg/L) were 833.3, 1428.6 and 1666.7 mg/kg, respectively. Mn(II) removal onto the IMCS in the presence of oxidants was well described by second-order reaction and Langmuir isotherm expression.

• Korean Journal of Veterinary Research
• /
• v.39 no.3
• /
• pp.501-512
• /
• 1999

We analyzed the contents of 12 types of minerals such as calcium in muscle from various species. Thereafter we observed changes of the concentrations according to age, part and sex in major domestic animals. The concentrations of calcium, iron, sodium, potassium, magnesium and zinc were high respectively whilst the content of cobalt, chromium, copper, manganese, molybdenum and nickel were low respectively in the muscle. The concentration of calcium was high in duck and dog but low in pig and horse. Also high level of sodium content was detected in dog and the content of potassium, iron showed high level in horse compared with the content in other animals. In 6 types of microminerals as cobalt, the level of muscle were no more than 1 ppm showing very low content in all animal, but $2.99{\pm}0.85$ppm of copper in duck was an exceptional case. According to the age some species showed small range of variation centering on macrominerals and there was no remarkable change in microminerals. Distribution of minerals was different according to the part and the variation was very diverse compared with other factors such as age and sex. Additionally, the content of minerals in muscle was higher in female than in male chicken and duck. In conclusion, the difference of the content of minerals according to the species was mainly focused on macrominerals.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.499-502
• /
• 2013

Trace elements which are essential components of biological structures may also be toxic when present at levels above the amounts required for biological function. In our study, trace element levels were measured with furnace atomic absorption spectrophotometry in 33 newly diagnosed renal cell carcinoma cases (preoperative) and 32 healthy controls. When compared with the control group, it was found that the levels of cadmium (Cd), lead (Pb) were higher and the levels of zinc (Zn), iron (Fe) and manganese (Mn) were lower in the patient group. These changes may be important in the formation of renal cell carcinoma, a question which should be explored with postoperative comparative studies.

• Journal of Korea Foundry Society
• /
• v.12 no.5
• /
• pp.390-396
• /
• 1992

In this study, we investigated effect of austempering factors and Mn addition on mechanical properties of ADI with ferrite-bainite matrix by pearlite-bainite transformation treatment. Ductile cast iron specimens containing various of Mn were austenitized at 875$^{\circ}C$ for 350 sec or 925$^{\circ}C$ for 160 sec and then austempered at 300$^{\circ}C$ or 400$^{\circ}C$ for the various periods(5 to 30 min). Manganese increased pearlite volume fraction in as cast ductile cast iron. The obtained results are as follows ; 1) In austenitizing, hardness of sepecimens austenitized at 875$^{\circ}C$ for 350 sec was higher than that of 925$^{\circ}C$ for 160 sec. 2) In effect of austempering temperature, tensile strength and handness of specimens austempered at 300$^{\circ}C$ was higher than that of 400$^{\circ}C$. However, elongation had reverse tendency. 3) Increasing austempering time decreased hardness due to the increment of bainite and retained austenite fractions. However, toughness are increased.

• Journal of Society of Preventive Korean Medicine
• /
• v.4 no.2
• /
• pp.25-56
• /
• 2000

Trace element are involved in enzymatic activities, immunological reactions. physiological mechanisms. Deficiency in some trace elements, such as iron and iodine. is still an important health problem, The role of trace elements deficiency is suspected in various clinical situations and is now confirmed by well designed supplementation studies. However, the importance of trace elements as chinese herbal constituents is not sufficiently appreciated by the oriental medical profession, although in recent years a significant increase of new finding on their essential character in chinese herbal medicine occurred. It is well known that herbal medicine contains a variety of trace elements which would show therapeutic effects with active components in herbal medicine . In china, recent work showed some positive correlation between trace element and traditional chinese medicine (TCM) in terms of therapeutic effects even if their role in therapeutic effects is still obscure. In korea, not much attention has been on the therapeutic importance of trace element contained in herbal medicine Here, the therapeutic effects of trace element in TCM were reviewed and summarized. 1. Iron, copper, zinc and manganese are mainly contained in TCM. In addtion, chromium, magnesium, molybdenum, nickel, alminium, cobalt, arsenic and selenium has been studied for their therapeutic effects 2. Zinc, is decreased in patients who have deficiency of kindney(腎虛) and chronic disease. Fe is decreased in patients who have deficiency of blood(血虛). However copper is increased in patients who have chronic disease and hepatic disease.3 Iron concentration is high in herbs used for tonifying and nourishing yin or blood(補陰補血藥) Zinc concentration is high also in herb used for tonifying kidiney and vital essence(補腎補精藥). In addition. copper concentration Is high in herb used for replenishing qi(補氣藥) 4 In herbal drugs, the therapeutic substances in TCM are not only organic but also inorganic. It seems that trace elements would be one of components in herb for its therapeutic effects. This indicates that therapeutic effects of TCM should be extended not only to herb itself, bur also to trace elements contained in herb.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.230-233
• /
• 2008

Stainless steels are alloy steels with iron as the primary constituent and chromium, nickel, and manganese as principal alloying elements. In addition to automotive, construction, and transportation industries, stainless steels have a variety of applications in the food, chemical, and pharmaceutical industries. Some common products made from stainless steel are sinks, wash basins, kitchen vessels, and cutlery. Among ferritic stainless steels, type 409 can be cold-formed easily and are used for deep-drawn parts such as vessels for the chemical and food industries. In this study, forming analyses and experiments to prevent the occurrence of inferiority such as wrinkles, crack, and neck for automotive muffler part are carried out to save the optimal conditions during forming by modifying the blank size and shape, blank holding force etc.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.191-193
• /
• 2001

This paper presents the result of groundwater analysis in Changwon area and the characteristics of the groundwater properties. Changwon city conducted groundwater analysis at 551 sites in 1996 and 1997. The water quality is suitable as groundwater use at 466 sites (84.6 %) and exceeds maximum contaminant levels (MCLs) at 85 sites (15.4 %). Major contaminants are total bacteria, coliform and nitrate-N. DNAPLs, e.g. TCE and PCE are detected in the areas of industrial complex and residence. The detection of TCE and PCE is due to organic solvents from manufacturing companies. They are also derived from laundries, Photographer's studios, septic tanks, etc. In addition, fifty groundwater samples were analyzed. Iron, manganese, zinc, copper, lead, aluminum and fluorine are detected in nearly all the groundwater samples. The groundwaters shown on the Piper diagram mostly belong to Ca-HCO$_3$ type.

• Korean Journal of Pharmacognosy
• /
• v.8 no.2
• /
• pp.61-68
• /
• 1977

The content of micro inorganic compounds in the 145 kinds of crude drugs on market was determined with Model 207 Atomic Absorption Spectrophotometer and Model 306 Flameless A.A. Content of Fe, Cu, Ni, Mn, Cd, Cr, Sn, and Pb was examined and the results revealed that the crude drugs which are using as a hematics and emmenagogues contained high content of iron, and those which are using as a antiinflammatory and emmenagogues contained high content of copper. Aromatic stomachics contain manganese and zinc, and diuretics and antiinaflammatory agents do tin. High content of Ni was found in tonics, but chronium and cadmium were not detected in crude drugs. There were no differences of content of trace metals in the various site of plants used.

• Genomics & Informatics
• /
• v.15 no.4
• /
• pp.162-169
• /
• 2017

Metal binding proteins or metallo-proteins are important for the stability of the protein and also serve as co-factors in various functions like controlling metabolism, regulating signal transport, and metal homeostasis. In structural genomics, prediction of metal binding proteins help in the selection of suitable growth medium for overexpression's studies and also help in obtaining the functional protein. Computational prediction using machine learning approach has been widely used in various fields of bioinformatics based on the fact all the information contains in amino acid sequence. In this study, random forest machine learning prediction systems were deployed with simplified amino acid for prediction of individual major metal ion binding sites like copper, calcium, cobalt, iron, magnesium, manganese, nickel, and zinc.