• Title/Summary/Keyword: ion profile

Search Result 350, Processing Time 0.037 seconds

Hydrogeochemical Research on the Characteristic of Chemical Weathering in a Granitic Gatchment (水文化學的 資料를 통한 花崗岩質 流域의 化學的 風化特性에 關한 硏究)

  • Park, Soo-Jin
    • Journal of the Korean Geographical Society
    • /
    • v.28 no.1
    • /
    • pp.1-15
    • /
    • 1993
  • This research aims to investigate some respects of chemical weathering processes, espcially the amount of solute leaching, formation of clay minerals, and the chemical weathering rate of granite rocks under present climatic conditions. For this purpose, I investigated geochemical mass balance in a small catchment and the mineralogical composition of weathered bedrocks including clay mineral assemblages at four res-pective sites along one slope. The geochemical mass blance for major elements of rock forming minerals was calculated from precipitation and streamwater data which are measured every week for one year. The study area is a climatically and litholo-gically homogeneous small catchment($3.62Km^2$)in Anyang-shi, Kyounggi-do, Korea. The be-drock of this area id Anyang Granite which is composed of coarse-giained, pink-colored miner-als. Main rock forming minerals are quartz, K-Feldspar, albite, and muscovite. One of the chracteristics of this granite rock is that its amount of Ca and Mg is much lower than other granite rock. The leaching pattern in the weathering profiles is in close reltion to the geochemical mass balance. Therefore the removal or accumulation of dissolved materials shows weathering patterns of granite in the Korean peninsula. Oversupplied ions into the drainage basin were $H^+$, $K^+$, Fe, and Mn, whereas $Na^2+$, $Mg^2+$, $Ca^2+$, Si, Al and $HCO-3^{-}$ were removed from the basin by the stream. The consumption of hydrogen ion in the catchment implies the hydrolysis of minerals. The surplus of $K^+$ reflects that vegetation is in the aggravation stage, and the nutrient cycle of the forest in study area did not reach a stable state. And it can be also presumed that the accumulation of $K^+$ in the top soil is related to the surplus of $K^+$. Oversupplied Fe and Mn were presumed to accumulate in soil by forming metallic oxide and hydroxide. In the opposite, the removal of $Na^+$, Si, Al resulted from the chemical weathering of albite and biotite, and the amount of removal of $Na^+$, Si, Al reflected the weathering rate of the bedrock. But $Ca^2+$ and $Mg^2+$ in stream water were contaminated by the scattered calcareous structures over the surface. Kaolinite is a stable clay mineral under the present environment by the thermodynamical analysis of the hydrogeochemical data and Tardy's Re value. But this result was quite different from the real assemblage of clay miner-als in soil and weathered bedrock. This differ-ence can be explained by the microenvironment in the weathering profile and the seasonal variation of climatic factors. There are different clay forming environments in the stydy area and these differences originate from the seasonal variation of climate, especially the flushing rate in the weathering profile. As it can be known from the results of the analysis of thermodynamic stability and characteristics of geochemical mas balance, the climate during winter and fall, when it is characterized by the low flushing rate and high solute influx, shows the environmental characteristics to from 2:1 clay minerals, such as illite, smectite, vermiculite and mixed layer clay minerals which are formed by neoformation or transformation from the primary or secondary minerals. During the summer and spring periods, kaoli-nite is a stable forming mineral. However it should consider that the other clay minerals can transformed into kaolinite or other clay minerals, because these periods have a high flushing rte and temperature. Materials which are directly regulated by chemical weathering in the weathered bedrock are $Na^+$, Si, and Al. The leaching of Al is, however, highly restricted and used to form a clay mineral, and that of Si falls under the same category. $Na^+$ is not taked up by growing veget ation, and fixed in the weathering profile by forming secondary minerals. Therefore the budget of $Na^+$ is a good indicator for the chemical weathering rate in the study area. The amount of chemical weathering of granite rocks was about 31.31g/$m^2+$/year based on $Na^+$ estimation.

  • PDF

A Study of Dosimetric Characteristics of a Diamond Detector for Small Field Photon Beams (광자선 소조사면에 대한 다이아몬드 검출기의 선량특성에 관한 연구)

  • Loh, John-K.;Park, Sung-Y.;Shin, Dong-O.;Kwon, Soo-I.;Lee, Kil-D.;Kim, Woo-C.;Cho, Young-K.
    • Journal of Radiation Protection and Research
    • /
    • v.24 no.4
    • /
    • pp.195-203
    • /
    • 1999
  • It is difficult to determine dosimetric characteristics for small field photon beams since such small fields do not achieve complete lateral electronic equilibrium and have steep dose gradients. Dosimetric characteristics of small field 4, 6, and 10 MeV photon beams have been measured in water with a diamond detector and compared to measurements using small volume cylindrical and plane parallel ionization chambers. Percent depth dose (PDD) and beam profiles for 6 and 10 MeV photon beams were measured with diamond detector and cylindrical ion chamber for small fields ranging from $1{\times}1\;to\;4{\times}4cm^2$. Total scatter factors($S_{c,p}$) for 4, 6, and 10 MeV photon beams were measured with diamond detector, cylindrical and plane parallel ion chambers for small fields ranging from $1{\times}1\;to\;4{\times}4cm^2$. The $S_{c,p}$ factors obtained with three detectors for 4, 6, and 10 MeV photon beams agreed well ($\pm1.2%$) for field sizes greater than $2{\times}2,\;2.5{\times}2.5,\;and\;3{\times}3\;cm^2$, respectively. For smaller field sizes, the cylindrical and plane parallel ionization chambers measure a smaller $S_{c,p}$ factor, as a result of the steep dose gradients across their sensitive volumes. The PDD values obtained with diamond detector and cylindrical ionization chamber for 6 and 10MeV photon beams agreed well ($\pm1.5%$) for field sizes greater than $4{\times}4\;cm^2$. For smaller field sizes, diamond detector produced a depth-dose curve which had a significantly shallower falloff than that obtained from the measurements of relative depth-dose with a cylindrical ionization chamber. For the measurements of beam profiles, a distortion in terms of broadened penumbra was observed with a cylindrical ionization chamber since diamond detector exhibited higher spatial resolution. The diamond detector with small sensitive volume, near water equivalent, and high spatial resolution is suitable detector compared to ionization chambers for the measurements of small field photon beams.

  • PDF

Developmental Changes of Serum IgA, IgG and IgM Concentrations in Broiler Chicks 1. Isolation of IgG and Developmental Changes of Serum IgG Levels (육용계의 혈청중 면역글로불린(IgA, IgG, IgM) 농도의 발육시기별 변화상 I. 혈청 IgG의 분리 및 발육시기별 농도 수준)

  • 김정우;이진언;김춘수;김상희;박근식
    • Korean Journal of Poultry Science
    • /
    • v.20 no.2
    • /
    • pp.65-72
    • /
    • 1993
  • The experiment was conducted to estasblish the large scale production of anti-serum against chicken IgG and to profile the developmental changes of serum IgG levels during all the feeding period(from hatching to 7 weeks of age) in broiler chicks. Blood sample were taken from Hubbard chicken hi-daily or /and weekly during the experimental period. The pure IgG was isolated from ammonium sulfate treated chicken serum by ion exchange chromatography. The quantitative assay of serum IgG were carried by RID method. It was observed that IgG concentrations were showed the highest at hatching(4.25 $m\ell$/$m\ell$), after that dicreased rapidly, lowest at 2 weeks of age(0.81 $m\ell$/$m\ell$), and gradually increased to 7 weeks of age (2.48 $m\ell$/$m\ell$) There was no differences of IgG level between sex, but the IgG levels of male chicks dicreased more rapidly and increased earlier thereafter than those of females during the first two weeks of agg.

  • PDF

Monolithic 3D-IC 구현을 위한 In-Sn을 이용한 Low Temperature Eutectic Bonding 기술

  • Sim, Jae-U;Park, Jin-Hong
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.338-338
    • /
    • 2013
  • Monolithic three-dimensional integrated circuits (3D-ICs) 구현 시 bonding 과정에서 발생되는 aluminum (Al) 이나 copper (Cu) 등의 interconnect metal의 확산, 열적 스트레스, 결함의 발생, 도펀트 재분포와 같은 문제들을 피하기 위해서는 저온 공정이 필수적이다. 지금까지는 polymer 기반의 bonding이나 Cu/Cu와 같은 metal 기반의 bonding 등과 같은 저온 bonding 방법이 연구되어 왔다. 그러나 이와 같은 bonding 공정들은 공정 시 void와 같은 문제가 발생하거나 공정을 위한 특수한 장비가 필수적이다. 반면, 두 물질의 합금을 이용해 녹는점을 낮추는 eutectic bonding 공정은 저온에서 공정이 가능할 뿐만 아니라 void의 발생 없이 강한 bonding 강도를 얻을 수 있다. Aluminum-germanium (Al-Ge) 및 aluminum-indium (Al-In) 등의 조합이 eutectic bonding에 이용되어 각각 $424^{\circ}C$$454^{\circ}C$의 저온 공정을 성취하였으나 여전히 $400^{\circ}C$이상의 eutectic 온도로 인해 3D-ICs의 구현 시에는 적용이 불가능하다. 이러한 metal 조합들에 비해 indium (In)과 tin (Sn)은 각각 $156^{\circ}C$$232^{\circ}C$로 굉장히 낮은 녹는점을 가지고 있기 때문에 In-Sn 조합은 약 $120^{\circ}C$ 정도의 상당히 낮은eutectic 온도를 갖는다. 따라서 본 연구팀은 In-Sn 조합을 이용하여 $200^{\circ}C$ 이하에서monolithic 3D-IC 구현 시 사용될 eutectic bonding 공정을 개발하였다. 100 nm SiO2가 증착된 Si wafer 위에 50 nm Ti 및 410 nm In을 증착하고, 다른Si wafer 위에 50 nm Ti 및 500 nm Sn을 증착하였다. Ti는 adhesion 향상 및 diffusion barrier 역할을 위해 증착되었다. In과 Sn의 두께는 binary phase diagram을 통해 In-Sn의 eutectic 온도인 $120^{\circ}C$ 지점의 조성 비율인 48 at% Sn과 52 at% In에 해당되는 410 nm (In) 그리고 500 nm (Sn)로 결정되었다. Bonding은 Tbon-100 장비를 이용하여 $140^{\circ}C$, $170^{\circ}C$ 그리고 $200^{\circ}C$에서 2,000 N의 압력으로 진행되었으며 각각의 샘플들은 scanning electron microscope (SEM)을 통해 확인된 후, 접합 강도 테스트를 진행하였다. 추가로 bonding 층의 In 및 Sn 분포를 확인하기 위하여 Si wafer 위에 Ti/In/Sn/Ti를 차례로 증착시킨 뒤 bonding 조건과 같은 온도에서 열처리하고secondary ion mass spectrometry (SIMS) profile 분석을 시행하였다. 결론적으로 본 연구를 통하여 충분히 높은 접합 강도를 갖는 In-Sn eutectic bonding 공정을 $140^{\circ}C$의 낮은 공정온도에서 성공적으로 개발하였다.

  • PDF

Electrochemical Characteristics of Li3V2(PO4)3 Negative Electrode as a Function of Crystallinity (결정화도에 따른 Li3V2(PO4)3 음극의 전기화학적 특성)

  • Ku, Jun-Whan;Park, Kyung-Jin;Ryu, Ji-Heon;Oh, Seung-Mo
    • Journal of the Korean Electrochemical Society
    • /
    • v.15 no.1
    • /
    • pp.27-34
    • /
    • 2012
  • $Li_3V_2(PO_4)_3$/carbon composite materials are synthesized from a sucrose-containing precursor. Amorphous $Li_3V_2(PO_4)_3/C$ (a-LVP/C) and crystalline $Li_3V_2(PO_4)_3/C$ (c-LVP/C) are obtained by calcining at $600^{\circ}C$ and $800^{\circ}C$, respectrively, and electrochemical performance as the negative electrode for lithium secondary batteries is compared for two samples. The a-LVP electrode shows much larger reversible capacity than c-LVP, which is ascribed to the spatial $Li^+$ channels and flexible structure of amorphous material. In addition, this electrode shows an excellent rate capability, which can be accounted for by the facilitated $Li^+$ diffusion through the defect sites. The sloping voltage profile is another advantageous feature for easy SOC (state of charge) estimation.

Studies on the Separation of Immunoglobulin and Immunological Response from Korean Native Cattle (한우초유중 Ig의 분리 ${\cdot}$ 정제 및 면역 반응에 관한 연구)

  • Baick, Seung-Cheon;Kim, Yong-Hwi;Shin, Je-Ho;Yu, Je-Hyeon
    • Journal of Dairy Science and Biotechnology
    • /
    • v.15 no.1
    • /
    • pp.1-9
    • /
    • 1997
  • This study was conducted to efficiently separate the Ig from Korean native cattle colostrum and to utilize them as an immunogen for the production of antibodies aginst rabbit. The results obtained were as follows : 1. About 84% of Ig G could be separated from Korean native cattle colostrum by·gel filtration using Superose 12 column on HPLC. The separation profile of Korean native cattle colostral immunoglobulin was similar that of Holstein colostral Ig. 2. Separation of Korean native cattle colostral Ig by anion exchange chromatography using Mono Q column on HPLC was poor resolution chromatographic pattern. 3. Hi-Trap Protein G column showed better results than the Protein A Sepharose CL-4B column in the Ig G binding capacity from Korean native cattle colostral Ig. 4. Protein G Sepharose Fast Flow system resulted in higher Ig g binding capacity as the industrial size scale-up approach. 5. Sufficient titer reaction of antibody to Korean native cattle colostral Ig G was confirmed by ELISA.

  • PDF

Surface Characteristics of Type II Anodized Ti-6Al-4V Alloy for Biomedical Applications

  • Lee, Su-Won;Jeong, Tae-Gon;Yang, Jae-Ung;Jeong, Jae-Yeong;Park, Gwang-Min;Jeong, Yong-Hun
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2017.05a
    • /
    • pp.77-77
    • /
    • 2017
  • Titanium and its alloys offer attractive properties in a variety of applications. These are widely used for the field of biomedical implants because of its good biocompatibility and high corrosion resistance. Titanium anodizing is often used in the metal finishing of products, especially those can be used in the medical devices with dense oxide surface. Based on SAE/AMS (Society of Automotive Engineers/Aerospace Material Specification) 2488D, it has the specification for industrial titanium anodizing that have three different types of titanium anodization as following: Type I is used as a coating for elevated temperature forming; Type II is used as an anti-galling coating without additional lubrication or as a pre-treatment for improving adherence of film lubricants; Type III is used as a treatment to produce a spectrum of surface colours on titanium. In this study, we have focused on Type II anodization for the medical (dental and orthopedic) application, the anodized surface was modified with gray color under alkaline electrolyte. The surface characteristics were analyzed with Focused Ion Beam (FIB), Scanning Electron Microscopy (SEM), surface roughness, Vickers hardness, three point bending test, biocompatibility, and corrosion (potentiodynamic) test. The Ti-6Al-4V alloy was used for specimen, the anodizing procedure was conducted in alkaline solution (NaOH based, pH>13). Applied voltage was range between 20 V to 40 V until the ampere to be zero. As results, the surface characteristics of anodic oxide layer were analyzed with SEM, the dissecting layer was fabricated with FIB method prior to analyze surface. The surface roughness was measured by arithmetic mean deviation of the roughness profile (Ra). The Vickers hardness was obtained with Vickers hardness tester, indentation was repeated for 5 times on each sample, and the three point bending property was verified by yield load values. In order to determine the corrosion resistance for the corrosion rate, the potentiodynamic test was performed for each specimen. The biological safety assessment was analyzed by cytotoxic and pyrogen test. Through FIB feature of anodic surfaces, the thickness of oxide layer was 1.1 um. The surface roughness, Vickers hardness, bending yield, and corrosion resistance of the anodized specimen were shown higher value than those of non-treated specimen. Also we could verify that there was no significant issues from cytotoxicity and pyrogen test.

  • PDF

Evaluation of Testosterone Metabolites/Dehydroepiandrosterone As the Indicators of Testosterone Administration in Horse Doping (경주마 약물검사에서 testosterone 투여 여부표지자로서의 testosterone 대사체들에 대한 dehydroepiandrosterone의 비율 평가)

  • Kim, Jin Young;Choi, Man Ho;Kim, Sung Jean;Kyong, Jin Burm;Chung, Bong Chul
    • Analytical Science and Technology
    • /
    • v.12 no.3
    • /
    • pp.190-195
    • /
    • 1999
  • The metabolism of testosterone ($17{\beta}$-hydroxy-androst-4-en-3-one) was confirmed in horse after a single intramuscular administration of testosterone cypionate (750 mg). Solvent extracts of urine obtained with enzymatic hydrolysis and methanolysis were analyzed by GC/MS after oxime t-butyldimethylsilyl (oxime-TBDMS) derivatization. The structures of four urinary metabolite after testosterone administration in horse were determined based on EI mass spectra and $5{\alpha}$-androstane-$3{\beta}$, $17{\alpha}$-diol and $5{\alpha}$-androstane-$3{\beta}$-ol-17-one as major was confirmed with authentic standard. Also the concentrations of $5{\alpha}$-androstane-$3{\beta}$, $17{\alpha}$-diol, $5{\alpha}$-androstane-$3{\beta}$, $17{\beta}$-diol, dehydroepiandrosterone (DHEA), $5{\alpha}$-androstane-$3{\beta}$-ol-17-one and testosterone were determined in the urine of normal subjects and the urine after administration. The recovery and detection limit in the most drugs were 86.3~94.7% and 1~3 ppb, respectively. Correlation coefficients for calibration were in the range of 0.984~0.999. Excretion profile of testosterone presents the rapid and large increasement up to maximum values at days 5 after administration and the slow regression. The relative ratios of testosterone, its metabolites over DHEA were determined for indication of testosterone administration in horse doping.

  • PDF

Etch Characteristics of Zinc Oxide Thin Films in a Cl2/Ar Plasma (Cl2/Ar 플라즈마를 이용한 ZnO 박막의 식각 특성)

  • Min, Su Ryun;Lee, Jang Woo;Cho, Han Na;Chung, Chee Won
    • Applied Chemistry for Engineering
    • /
    • v.18 no.1
    • /
    • pp.24-28
    • /
    • 2007
  • The etching of zinc oxide (ZnO) thin films has been studied using a high density plasma in a $Cl_2/Ar$ gas. The etch characteristics of ZnO thin films were systematically investigated on varying $Cl_2$ concentration, coil rf power, dc-bias voltage, and gas pressure. With increasing $Cl_2$ concentration, the etch rate of ZnO thin film increased, the redeposition around the etched patterns decreased but the sidewall slope of the etched patterns slanted. As the coil rf power and dc-bias voltage increased, the etch rates of ZnO thin films increased and etch profiles of ZnO thin films were improved. With increasing gas pressure, the etch rate of ZnO thin films slightly increased but little change in etch profile was observed. Based on these results, the optimal etching conditions of ZnO thin film were selected. Finally, the etching of ZnO thin films with a high degree of anisotropy of approximately $75^{\circ}{\sim}80^{\circ}$ without the redepositions and residues was successfully achieved at the etching conditions of 20% $Cl_2$ concentration, coil rf power of 1000 W, dc-bias voltage of 400 V, and gas pressure of 5 mTorr.

Quality characteristics and antioxidant capacities of oriental melon wine depending on pretreatments (전처리 방법에 따른 참외와인의 품질특성과 항산화능)

  • Hwang, Hee-Young;Ha, Hyoung-Tae;Ha, Se-Bi;Seong, Gi-Un;Hwang, In-Wook;Chung, Shin-Kyo
    • Food Science and Preservation
    • /
    • v.22 no.3
    • /
    • pp.421-427
    • /
    • 2015
  • Oriental melon (Cucumis melo L. var. makuwa) has been widely consumed as various processed foods, such as dried products, jelly, wine, juice, and vinegar, in Asian countries. In fruit processing, blanching and pressure treatments affect its quality, such as antioxidant activities, sensory characteristics, and etc. This study was conducted to evaluate the effects of blanching and pressure pre-treatments on oriental melon wine-making (BP, blanching and pressure filtration; BNP, blanching and non-pressure filtration; NBP, non-blanching and pressure filtration; and NBNP, non-blanching and non-pressure filtration). Physicochemical properties and antioxidant capacities by ${\alpha}$, ${\alpha}$-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity, ferric ion reducing antioxidant power (FRAP) assay, and total phenolic and total flavonoid contents were measured for comparison of the different pre-treatment methods. After the aging process, the alcohol contents and pH values showed no statistical differences, whereas the amount of soluble solids, reducing sugar, and titratable acidity were slightly different among the pre-treatments (p<0.05). The samples with blanching pre-treatment showed higher antioxidant capacities than those of other pre-treatments. In the sensory evaluation, the BNP was the best in overall acceptability. Thus, this study showed that the blanching treatment enhanced the antioxidant capacities and sensory qualities of the oriental melon wine.