• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1253-1256
• /
• 2007

A display device combining plasma display panel (PDP) and field emission display (FED) is proposed to achieve high luminous efficiency. The device can avoid the main energy loss channels of both PDP (ion loss) and FED (low CL efficiency). $2{\sim}6$”-diagonal test panels with carbon nano-tube (CNT) electron emitter and Xenon ambient gas showed the luminous efficiency of 4.14lm/W and brightness of $263cd/m^2$ at 35V (1kHz, 1% duty), indicating that it is a good candidate for the low voltage driven, highly efficient next generation display.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.616-619
• /
• 2003

This work presents the design, fabrication and microwave performance of distributed analog phase shifter (DAPS) fabricated on $(Ba,\;Sr)TiO_3$ (BST) thin films for X-band applications. Ferroelectric BST thin films were deposited on MgO substrates by pulsed laser deposition. The DAPS consists of high impedance coplanar waveguide (CPW) and periodically loaded tunable BST interdigitated capacitors (IDC). In order to reduce the insertion loss of DAPS and to remove the alteration of unloaded CPW properties according to an applied dc bias voltage, BST layer under transmission lines were removed by photolithography and RF-ion milling. The measured results are in good agreement with the simulated results at the frequencies of interest. The measured differential phase shift based on BST thin films was $24^{\circ}$ and the insertion loss decreased from 1.1 dB to 0.7 dB with increasing the bias voltage from 0 to 40V at 10 GHz.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.271-271
• /
• 2013

The defect states of a Ar-sputtered SiO2 surface on Si (001) were investigated using Auger electron spectroscopy (AES) and reflection electron energy loss spectroscopy (REELS). The REELS spectra at the primary electron energy of 500 eV showedthat three peaks at 2.5, 5.1, and 7.2 eV were found within the band gap after sputtering. These peaks do not appear at the primary electron energies of 1,000 and 1,500 eV, which means that the defect states are located at the extreme surface of a SiO2/Si thin film. According to the calculations, two peaks at 7.2 and 5.1 eV are related to neutral oxygen vacancies. However, the third peak at 2.5 eV has never been previously reported and the theories proposed that this defect state may be due to Si-Si bonding. Our Auger data showed that a peak for Si-Si bonding at 89 eV appears after Ar ion sputtering on the surface of the sample, which is consistent with the theoretical models.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.408-409
• /
• 2007

Ferrule function have connect Optical Communication Cable. But Ferrule have important role that is decided transmission efficiency and information quality. Key-point of detailed drawing of ferrule is Anti-Reflection. In the study Broadband Anti-Reflection coating Film was design for ferrule of optical connector and deposited in low temperature by Ion-Assisted Deposition system. Optical thin film materials($Ta_2O_5$, $SiO_2$) were manufactured Index and Film thickness. $Ta_2O_5$ index is 2.123 ~ 2.125 and $SiO_2$ is 1.44 ~ 1.442. Reflection Loss of film deposited on Ferrule is 30.1[dB].

• 한국전기전자재료학회논문지
• /
• 제20권11호
• /
• pp.991-994
• /
• 2007

In this paper, we have designed the anti-reflection(AR) coating for $1400{\sim}1600$ nm wavelength range on the ferrule facet of optical connector. The low-temperature ion-assisted deposition was applied to AR coating on the ferrule facet in order to avoid damage of optical connector. We have measured the refractive index of coating film($Ta_2O_5\;and\;SiO_2$) using the ellipsometer and optimized the film thickness using the SEM and thickness measurement equipment. UV-VIS-NIR spectrophotometer is used to measure transmissivity of the AR coated ferrule facet. The refractive index of $Ta_2O_5\;and\;SiO_2$ is $2.123{\sim}2.125$ and $1.44{\sim}1.442$, respectively, for $1400{\sim}1600$ nm wavelength range. The transmissivity of the AR coated ferule facet is more than 99.8 % for $1425{\sim}1575$ nm wavelength range and more than 99.5 % for $1400{\sim}1600$ nm wavelength range. The return loss of the AR coated ferrule facet is 30.1 dB.

• Bulletin of the Korean Chemical Society
• /
• 제18권8호
• /
• pp.874-880
• /
• 1997

Various classes of phospholipids were investigated for the structural determination of fatty acyl groups by fast atom bombardment tandem mass spectrometry (FAB-MS/MS). Phospholipids were desorbed by FAB as molecules chelated with sodium ion (or ions). Collision-induced dissociation (CID) of intact sodium adduct molecular ions ([M+Na]+, [M-H+2Na]+ or [M+Na-2H]-) produced a series of homologous fragment ions via the charge-remote fragmentation along the fatty acid chains. These ions were found useful to locate the double bond positions even for the polyunsaturated fatty acid chains. The regiospecificity of the acyl chain linkages in phosphatidylcholine (PC) could also be determined based on the ratio of relative abundance of the product ions (i.e., [M+Na-85-R2COOH]+ vs [M+Na-85-R1COOH]+) in CID-MS/MS of [M+Na]+. These are generated by the loss of fatty acyl groups at sn-1 and sn-2, respectively, together with the choline group. In all the phospholipid compounds investigated, loss of the fatty acid at the sn-2 position was dominant. The present method was applied to the structural determination of molecular species of phosphatidylglycerols (PG) isolated from cyanobacterium Synechocystis sp. PCC 6803.

• Advances in concrete construction
• /
• 제7권2호
• /
• pp.75-85
• /
• 2019

The present study is focused on the mechanical and durability properties of ternary blended cement concrete mix of different grades 30 MPa, 50 MPa and 70 MPa. Three mineral admixtures (fly ash, silica fume and lime sludge) were used as a partial replacement of cement in the preparation of blended concrete mix. The durability of ternary blended cement concrete mix was studied by exposing it to acids HCl and $H_2SO_4$ at 5% concentration. Acid mass loss factors (AMLF), acid strength loss factor (ASLF) and acid durability factor (ADF) were determined, and the results were compared with the control mix. Chloride ions penetration was investigated by conducting rapid chlorination penetration test and accelerated corrosion penetration test on control mix and ternary blended cement concrete. From the results, it was evident that the usage of these mineral admixtures is having a beneficiary role on the strength as well as durability properties. The results inferred that the utilization of these materials as a partial replacement of cement have significantly enhanced the compressive strength of blended concrete mix in 30 MPa, 50 MPa and 70 MPa by 42.95%, 32.48% and 22.79%. The blended concrete mix shown greater resistance to acid attack compared to control mix concrete. Chloride ion ingress of the blended cement concrete mix was low compared to control mix implying the beneficiary role of mineral admixtures.

• 한국광학회지
• /
• 제3권4호
• /
• pp.258-265
• /
• 1992

저압화학기상증착법으로 Si 기판에 $P_{2}O_{5}-SiO_{2}$ 광도파박막계를 제작하였다. 제작된 박막의 광도파손실율은 1.65dB/cm이었으나 $1100^{\circ}C$에서 열처리한 뒤에는 0.1dB/cm 이하로 크게 감소하였다. 레이저 노광법과 활성이온식각법으로 광도파로를 제작하여 $1100^{\circ}C$에서 열처리하였다. 열처리 결과 도파로 코어의 모양은 사각형에서 반원형으로 바뀌었으며 0.6328$\mu$m에서 0.03dB/cm 그리고 1.53$\mu$m에서 0.04dB/cm의 낮은 도파손실율을 나타내었다. 도파로의 도파손실율이 감소하는 이유로는 고온 열처리과정에서 첫째 박막조직과 결합하여 광흡수를 일으키는 수소가 확산 방출되고 둘째 광산란을 일으키는 도파로의 거친 계면 및 박막조직이 재형성되며, 셋째 식각법으로 도파로를 만들때 생기는 도파로 코어의 거친 계면이 매끄럽게되어 도파광의 산란손실이 중어들기 때문으로 생각된다.

• 센서학회지
• /
• 제24권4호
• /
• pp.264-269
• /
• 2015

An infrared (IR) bolometer measures the change of resistance by absorbing incident IR radiation and generates a signal as a function of the radiation intensity. Since a bolometer requires temperature stabilization and light filtering except for the infrared rays, it is essential for the device to be packaged meeting conditions that above mentioned. Minimization of heat loss is needed in order to stabilize temperature of bolometer. Heat loss by conduction or convection requires a medium, so the heat loss will be minimized if the medium is a vacuum. Therefore, vacuum packaging for bolometer is necessary. Another important element in bolometer packaging is germanium (Ge) window, which transmits IR radiation to heat the bolometer. To ensure a complete transmittance of IR light, anti-reflection (AR) coatings are deposited on both sides of the window. Although the transmittance of Ge window is high for IR rays, it is difficult to use frequently in low-price IR bolometer because of its high price. In this paper, we fabricated IR window by utilizing silicon (Si) substrate instead of Ge in order to reduce the cost of bolometer packaging. To enhance the IR transmittance through Si substrate, it is textured using Reactive Ion Etching (RIE). The texturing process of Si substrate is performed along with the change of experimental conditions such as gas ratio, pressure, etching time and RF power.

• 분석과학
• /
• 제24권2호
• /
• pp.78-84
• /
• 2011

본 연구에서는 양성 및/또는 음성 이온 방식으로 저에너지 충돌-유발 분해(CID)를 이용한 serine protease 저해제인 camostat 와 그것의 분해산물인 4-(4-guanidinobenzoyloxy)phenylacetic acid (GBPA)의 분해 패턴을 전자분무 소스가 있는 사중극자 텐덤 질량분석기(ESI-MS/MS)를 이용하여 최초로 조사하였다. Camostat의 양이온 CID 질량 스펙트럼 분석결과, 분자구조내 에스테르 결합을 이루는 카르보닐 기와 산소 원자사이의 단일 결합(C-O) 분해가 우선적으로 일어나고, guanidine 기의 초기 손실보다는 N,Ndimethylcarbamoylmethyl기의 초기 손실이 더 잘 일어난다는 것이 특징적으로 확인되었다. GBPA의 양이온 CID 스펙트럼의 경우는, 4-guanidinobenzoyloxy 기에 있는 카르보닐 기와 산소원자 사이의 초기 분해가 일어나서 m/z 145에서 가장 강도가 높은 피크를 만들었다. 반면에, GBPA의 음이온 스펙트럼은 m/z 312의 모분자 이온에서 $CO_2$와 NH=C=NH의 순차적인 중성 손실로 인하여 m/z 226의 가장 강도가 높은 피크가 특징적으로 생성되었다.