• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.103-108
• /
• 2004

Carbon fiber reinforced composites(CFRP) were fabricated with phenolic resin matrix by hot press molding, and its surface was modified by the ion-assisted reaction process. When we tested the friction coefficient and wear rate variation and observed the effect of fibers with respect to friction and wear characteristics, the amount of pitch based carbon fiber was 45wt% and the average friction coefficient was the lowest at 0.12. When the amount of ion-irradiation was $1\times10^{l6}ions/cm^2$, the friction coefficient of the composites was about 0.12 and the wear mode was stable, whereas, the friction coefficient of the non-treated composites was about 0.16 and the wear mode was very unstable. But if the amount of ion-irradiation was $5\times10^{l6}ions/cm^2$$1\times10^{l6}ions/cm^2$ion-irradiation case.

• 한국전기전자재료학회논문지
• /
• 제20권5호
• /
• pp.471-477
• /
• 2007

SCBF(Spherically Convergent Beam Fusion) device has been studied as a neutron source. Neutron production rate is a most important factor for the application of SCBF device and is proportional to the square of the ion current[1]. It is regarded generally that some correlations between the potential well structure and the ion current exist. In this paper, the ion current and potential distribution were calculated in a variety of grid cathode geometries using FEM-FCT method. Single potential well structure was certified inside the grid cathode. The deeper the potential well became, the higher the ion current due to the high electric field near the grid cathode became.

• 한국산학기술학회논문지
• /
• 제3권3호
• /
• pp.183-188
• /
• 2002

Antibacterial glass ceramics composed of $5Li_2O{\cdot}36CaO{\cdot}20TiO_2{\cdot}27P_2O_5$ were Prepared. After ion exchange in the $AgNO_3$solution, crystallization phases were $AgTi_2(PO_4)_3$, $LiTi_2(PO_4)_3$ and $Ca_3(PO_4)_2$. In case of ion exchange, the crystallization phases started to be transformed from $LiTi_2(PO_4)_3$ to $AgTi_2(PO_4)_3$in 0.5 mole $AgNO_3$ solution and the transformation was almost completed in 1.0 mole. ion exchange rate of glass-ceramics powder, considering ion exchange time, was more fast than that of bulk. The bacteriostatic effect of the glass-ceramics on Staphyloroccus aureus and Salmonella typhi bacteria was more excellent than that of glass when the crystallization phase was transformed from LTP to AgTP.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.223-229
• /
• 2002

Spark plug ionization signal could be useful in an internal combustion engine as a feedback signal for combustion diagnostics such as misfire detection, knocking detection and lambda control, but the signal has high level of cyclic fluctuation in an internal combustion engine due to residual gas, pressure, temperature, mixture composition in the spark gap. Because of this reason it is very difficult to apply ion signal to commercial engine control. In this Study, a correlation between A/F and spark plug ionization signal was studied in a constant volume chamber. Constant volume chamber with gas phase fuel(Propane) has homogeneous fuel composition , no mixture flow, same pressure and temperature on each test. The results show that mean chemi-ion signal has the highest correlation with A/F and intial pressure change has on effect on the thermal-ion signal and not on chemi-ion signal.

• 한국정밀공학회지
• /
• 제6권1호
• /
• pp.75-84
• /
• 1989

This paper deals with the effect of $N_2$ and $H_2$gas mixture ratio and ion-nitriding time in the corrosion fatigue fracture behavior of ion-nitrided SCM4 steel with notch subject to rotary bending stress. The specimens were treated rapid water cooling after ion-nitriding at $500^{\circ}C$ Torr for 1 hour and 3 hours in gas mixtures of 80% $N_2$and 50% $N_2$. The fatigue limit and the fracture strength of corrosion fatigue depended on $N_2$gas quantity and ion-nitriding time. The ion-nitrided specimens showed about 88 .approx. 158% increase in the fracture strength of corrosion fatigue in $10^6$ cycles than non-nitrided specimens. The corrosion failure is due to corrosion pitting of the surface, and the propargation of cracks started at the surface into the core.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.747-754
• /
• 1990

본 연구에서는 장시간 가공하는 경우 가공량과 가공물에 입사되는 이온 빔의 입사각도에 따라 이온 스파터 가공이 표면거칠기에 미치는 영향에 대해서 연구해 보았 다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2186-2191
• /
• 2008

An experimental study was performed to investigate the effect of swirl condition and secondary air rate on the Ion voltage and CO emission characteristics. In this study, the combustion characteristics were investigated with the variation of swirler diameter, vane angle, suction air rate. The result of this study, the Ion voltage increase with increasing the diameter of the swirler. Additionally with increasing the suction air rate, the Ion voltage is the same. The CO concentration depends on suction air rate. In the other hand, it is almost unaffected by swirler's diameter. The flame length and Ion voltage decease with decreasing O2 percentage of surrounding air.

• 한국세라믹학회지
• /
• 제52권2호
• /
• pp.133-136
• /
• 2015

The outward diffusion of $Na^+$ ions in iron-bearing soda lime silicate glass via oxidation heat treatment before the ion exchange process is artificially induced in order to increase the amount of ions exchanged during the ion exchange process. The effect of the addition process is analyzed through measuring the bending strength, the weight change, and the inter-diffusion coefficient after the ion exchange process. The glass strength is increased when the outward diffusion of $Na^+$ ions via oxidation heat treatment before the ion exchange process is added. For the glass subjected to the additional process, the weight change and diffusion depth increase compared with the glass not subjected to the process. The interdiffusion coefficient is also slightly increased as a result of the additional process.

• Computers and Concrete
• /
• 제10권3호
• /
• pp.219-229
• /
• 2012

Carbonation is a widespread degradation of concrete and may be coupled with more severe degradations. An experimental investigation was carried out to study the effect of carbonation on chloride ion diffusion of concrete. The characteristic of concrete after carbonation was measured, such as carbonation depth, strength and pore structure. Results indicated that carbonation depth has a good linear relation with square root of carbonate time, and carbonation can improve compressive strength, but lower flexural strength. Results about pore structure of concrete before and after carbonation have shown that carbonation could cause a redistribution of the pore sizes and increase the proportion of small pores. It also can decrease porosities, most probable pore size and average pore diameters. Chloride ion diffusion of concrete after carbonation was studied through natural diffusion method and steady state migration testing method respectively. It is supposed that the chloride ion concentration of carbonation region is higher than that of the sound region because of the separation of fixed salts, and chloride ion diffusion coefficient was increased due to carbonation action evidently.

• The Korean Journal of Physiology
• /
• 제9권1호
• /
• pp.1-11
• /
• 1975

The present experiments were carried out to investigate the active center of sodium and potassium ion activated adenosine triphosphatase. An ATPase, activated by sodium ion Plus potassium ion in the presence of magnesium ion, and inhibited by ouabain, has been obtained from rabbit red cell ghosts. The ATPase activity was measured by inorganie phosphate released from ATP. From this values of the measured inorganic phosphate, the activity of ATPase was calculated. The following results were observed. 1. The activity of $(Na^++K^+)-ATPase$ is inhibited by ouabain. This effect may not be due to an effect on sulfhydryl groups, amino groups, carboxyl groups, imidazole groups and hydroxyl groups. 2. The $(Na^++K^+)$-activated enzyme system is inhibited by p-chloromercuribenzoate and by d nitroflurobenzene, and this effect may be due to an effect on sulfhydryl groups. These results indicate that the sulfhydryl groups is attached to sodium-potassium dependent adenosine triphosphate, an aspect of the pump. 3. The $(Na^++K^+)-activated$ enzyme system is inhibited by maleic anhydride and this inhibition is reversed by lysine. This Seems to indicate that the active center of this enzyme is the amino groups. 4. The $(Na^++K^+)$-activated enzyme system is inhibited by iodoacetamide and this inhibition is reversed by the simultaneous present of cysteine and aspartic acid in the suspension medium. This result indicates that this enzyme contains sulfhydryl groups and carboxyl groups. 5. The $(Na^++K^+)-ATPase$ activity is accelerated by adrenaline and this effect is abolished by aspartic acid. This effect of aspartic acid indicate that carboxyl group might be involved in the hydrolysis of ATP by the enzyme system. On the hydrolysis of ATP by the enzyme system. On the basis of these experiments it f·as suggested that the active center of $(Na^++K^+)-activated$ ATPase contains sulfhydryl groups, amino groups and carboxyl groups.