• 제목/요약/키워드: ion detector

검색결과 187건 처리시간 0.025초

원격강내조사용 Co-60 선원의 대체용 Ir-192 선원의 조사선량결정 및 선량 등방성조사 (Determination of Exposure Dose Rate and Isotropic Distributions of Substitute High Dose Rate Ir-192 Source for Co-60 Brachytherapy Source)

  • 최태진;원철호;김옥배;김시운;김금배;조운갑;한현수;박경배
    • 한국의학물리학회지:의학물리
    • /
    • 제9권1호
    • /
    • pp.55-64
    • /
    • 1998
  • 고선량률 원격 강내조사 선원은 전량 외국에서 수입되어 왔으며, 최근 Co-60 소선원의 공급부진으로 초기 도입시의 치료시간에 비해 4내지 5배의 시간을 조사하게 되어 대체용 선원의 개발이 크게 요구되고 있다. 이 연구는 국내 하나로 원자로의 중성자를 이용하여 $^{191}$ Ir(n,Υ)$^{192}$ Ir 핵반응을 일으켜 Ir-192 선원 2.87 Ci (밀봉 1.012 Ci)를 생산하고, 고선량률 원격 강내조사선원의 선량특성을 조사하였다. 제작선원에 대한 조사선량률은 아크릴 지지체의 중앙에 아크릴 아프리케이터를 고정하고 선원의 중심으로부터 각각 5, 10, 20 cm 거리에 전리함을 설치하여 일정시간 선원을 노출시켜 측정한 결과 6.36 $\pm$ 0.147 Rm$^2$/GBq-hr (2.350 $\pm$ 0.054 R$cm^2$/mCi-hr)을 결정하였으며, 측정오차는 1$\sigma$ 는 2.2% 였다. 계산선량은 조사선량률 상수 4.69 R$cm^2$/h-mCi 와 Ir-192 에너지 스펙트럼을 이용한 선원자체 및 철에 대한 질량흡수계수를 통해 구했으며, 실제 측정선량과 평균 3.8 % 오차범위에서 일치하였다. 선량 등방성은 선원의 측방향과 축 및 대각선방향으로 전리함을 이용하여 측정한 결과 3 % 이내 균등한 선량을 나타내었으며, 필름선량에서도 균등선량분포를 확인할 수 있었으며, Co-60 선원과 유사한 선량분포를 얻었을 수 있었다. 특히 본 연구의 선량특성조사는 강내조사선량선원 대체용의 선원개발과 선량계획 전산화의 근거가 될 것으로 믿는다.

  • PDF

방사선수술을 위한 3차원 정위 시스템 및 방사선량 측정 시스템 개발 (Development of 3-D Stereotactic Localization System and Radiation Measurement for Stereotactic Radiosurgery)

  • 서태석;서덕영;박승훈;장홍석;최보영;윤세철;신경섭;박용휘;김일환;강위생;하성환;박찬일
    • Journal of Radiation Protection and Research
    • /
    • 제20권1호
    • /
    • pp.25-36
    • /
    • 1995
  • The purpose of this research is to develop stereotactic localization and radiation measurement system for the efficient and precise radiosurgery. The algorithm to obtain a 3-D stereotactic coordinates of the target has been developed using a Fisher CT or angio localization. The procedure of stereotactic localization was programmed with PC computer, and consists of three steps: (1) transferring patient images into PC; (2) marking the position of target and reference points of the localizer from the patient image; (3) computing the stereotactic 3-D coordinates of target associated with position information of localizer. Coordinate transformation was quickly done on a real time base. The difference of coordinates computed from between Angio and CT localization method was within 2 mm, which could be generally accepted for the reliability of the localization system developed. We measured dose distribution in small fields of NEC 6 MVX linear accelerator using various detector; ion chamber, film, diode. Specific quantities measured include output factor, percent depth dose (PDD), tissue maximum ratio (TMR), off-axis ratio (OAR). There was small variation of measured data according to the different kinds of detectors used. The overall trends of measured beam data were similar enough to rely on our measurement. The measurement was performed with the use of hand-made spherical water phantom and film for standard arc set-up. We obtained the dose distribution as we expected. In conclusion, PC-based 3-D stereotactic localization system was developed to determine the stereotactic coordinate of the target. A convenient technique for the small field measurement was demonstrated. Those methods will be much helpful for the stereotactic radiosurgery.

  • PDF

Small scale magNetospheric and Ionospheric Plasma Experiments; SNIPE mission

  • Hwang, Junga;Lee, Jaejin;Shon, Jongdae;Park, Jaeheung;Kwak, Young-Sil;Nam, Uk-Won;Park, Won-Kee
    • 천문학회보
    • /
    • 제42권1호
    • /
    • pp.40.3-41
    • /
    • 2017
  • Korea Astronomy and Space Science Institute The observation of particles and waves using a single satellite inherently suffers from space-time ambiguity. Recently, such ambiguity has often been resolved by multi-satellite observations; however, the inter-satellite distances were generally larger than 100 km. Hence, the ambiguity could be resolved only for large-scale (> 100 km) structures while numerous microscale phenomena have been observed at low altitude satellite orbits. In order to resolve those spatial and temporal variations of the microscale plasma structures on the topside ionosphere, SNIPE mission consisted of four (TBD) nanosatellites (~10 kg) will be launched into a polar orbit at an altitude of 700 km (TBD). Two pairs of satellites will be deployed on orbit and the distances between each satellite will be from 10 to 100 km controlled by a formation flying algorithm. The SNIPE mission is equipped with scientific payloads which can measure the following geophysical parameters: density/temperature of cold ionospheric electrons, energetic (~100 keV) electron flux, and magnetic field vectors. All the payloads will have high temporal resolution (~ 16 Hz (TBD)). This mission is planned to launch in 2020. The SNIPE mission aims to elucidate microscale (100 m-10 km) structures in the topside ionosphere (below altitude of 1,000 km), especially the fine-scale morphology of high-energy electron precipitation, cold plasma density/temperature, field-aligned currents, and electromagnetic waves. Hence, the mission will observe microscale structures of the following phenomena in geospace: high-latitude irregularities, such as polar-cap patches; field-aligned currents in the auroral oval; electro-magnetic ion cyclotron (EMIC) waves; hundreds keV electrons' precipitations, such as electron microbursts; subauroral plasma density troughs; and low-latitude plasma irregularities, such as ionospheric blobs and bubbles. We have developed a 6U nanosatellite bus system as the basic platform for the SNIPE mission. Three basic plasma instruments shall be installed on all of each spacecraft, Particle Detector (PD), Langmuir Probe (LP), and Scientific MAGnetometer (SMAG). In addition we now discuss with NASA and JAXA to collaborate with the other payload opportunities into SNIPE mission.

  • PDF

Efficient Verification of X-ray Target Replacement for the C-series High Energy Linear Accelerator

  • Cho, Jin Dong;Chun, Minsoo;Son, Jaeman;An, Hyun Joon;Yoon, Jeongmin;Choi, Chang Heon;Kim, Jung-in;Park, Jong Min;Kim, Jin Sung
    • 한국의학물리학회지:의학물리
    • /
    • 제29권3호
    • /
    • pp.92-100
    • /
    • 2018
  • The manufacturer of a linear accelerator (LINAC) has reported that the target melting phenomenon could be caused by a non-recommended output setting and the excessive use of monitor unit (MU) with intensity-modulated radiation therapy (IMRT). Due to these reasons, we observed an unexpected beam interruption during the treatment of a patient in our institution. The target status was inspected and a replacement of the target was determined. After the target replacement, the beam profile was adjusted to the machine commissioning beam data, and the absolute doses-to-water for 6 MV and 10 MV photon beams were calibrated according to American Association of Physicists in Medicine (AAPM) Task Group (TG)-51 protocol. To verify the beam data after target replacement, the beam flatness, symmetry, output factor, and percent depth dose (PDD) were measured and compared with the commissioning data. The difference between the referenced and measured data for flatness and symmetry exhibited a coincidence within 0.3% for both 6 MV and 10 MV, and the difference of the PDD at 10 cm depth ($PDD_{10}$) was also within 0.3% for both photon energies. Also, patient-specific quality assurances (QAs) were performed with gamma analysis using a 2-D diode and ion chamber array detector for eight patients. The average gamma passing rates for all patients for the relative dose distribution was $99.1%{\pm}1.0%$, and those for absolute dose distribution was $97.2%{\pm}2.7%$, which means the gamma analysis results were all clinically acceptable. In this study, we recommend that the beam characteristics, such as beam profile, depth dose, and output factors, should be examined. Further, patient-specific QAs should be performed to verify the changes in the overall beam delivery system when a target replacement is inevitable; although it is more important to check the beam output in a daily routine.

구강 내 자당 및 포도당 잔류 경과 시간에 따른 칼륨과 마그네슘 농도 변화 (Survey on the Changes of Potassium and Magnesium Concentration according to the Retention Time After Rinse of Sucrose and Glucose in Oral)

  • 이혜진;양달님
    • 한국콘텐츠학회논문지
    • /
    • 제19권11호
    • /
    • pp.424-433
    • /
    • 2019
  • 본 논문은 설탕물 양치 전후, 타액 내 칼륨과 마그네슘의 농도 변화를 분석한 연구이다. 타액 샘플은 10% 자당(포도당) 용액으로 양치하기 전과 양치 직후부터 60분까지 채취하였고 이온크로마토그래피법으로 분석하였다. 설탕물 양치 전 칼륨의 평균 농도는 274.3±77.9 mg/ℓ (279.2±62.1 mg/ℓ)이며, 마그네슘의 평균 농도는 4.5±2.5 mg/ℓ(4.8±2.0 mg/ℓ)이다. 설탕물 양치 직후, 칼륨과 마그네슘의 농도는 자당의 경우 143.9±55.4 mg/ℓ, 2.7±3.1 mg/ℓ이며, 포도당의 경우 150.9±64.2 mg/ℓ, 2.6±0.7 mg/ℓ로 대조군에 비해 급격히 낮아졌으나, 양치 후 60분에서 대조군의 이온 농도 수준으로 회복됨을 확인하였다. 즉 설탕물 양치 직후에는 자극에 의해 타액 내 칼륨과 마그네슘 이온 농도가 낮아지나, 60분 후에는 타액의 자정작용으로 구강 내 향상성이 회복되었다. 본 논문은 타액에 관한 기초자료를 축적하는 것에 의의를 두고 연구하였다.

알파비적검출방법에 의한 대기중 라돈딸핵종의 화학적 동특성연구 (A Kinetics Study of Rn Daughter and Atmospheric Trace Gas Using Alpha Track Detection)

  • 윤석철;하정우
    • Journal of Radiation Protection and Research
    • /
    • 제20권2호
    • /
    • pp.79-83
    • /
    • 1995
  • 과거 물분자와 전리방사선과의 상호작용에 의하여 생성된 방사능 극소입자에 관한 많은 연구결과가 보고되어 왔다. 특히 최근연구에서는 물분자의 방사성분해 에 의해 발생한 높은 농도의 수산화래디칼은 실내의 유기가스와 반응 후 저증기압의 화합물로 변하여 극소입자를 형성한다고 알려져왔다. 본 연구에서는 라돈의 첫째딸핵종인 Po-218에 대한 대기가스와 물분자와의 상호의존성을 조사할 목적으로, 실내가스의 최적제어가 가능한 라돈챔버를 사용하여 일련의 실험을 수행하였다. 제작된 정전기분광계를 사용하여 라돈의 첫째딸핵종인 Po-218이온에 대해 $0.07-5.0cm^2/V\;sec$ 범위의 이동도스펙트럼을 측정하였으며, 대기가스로 0.5ppm에서 5ppm까지의 $SO_2$가스를 사용하여 실험결과를 분석하였다. 라돈챔버내에 물분자의 첨가와 동 물분자의 방사성분해에 의하여 생성된 수산화래디칼에 의한 극소입자들의 형성과정을 확인하였으며 $PoO_x^+$ 이온 주변에 $SO_2$가스가 부착하면서 일어나는 화학반응에 대한 화학적 동특성연구를 수행하였다.

  • PDF

Prediction of Midline Dose from Entrance and Exit Dose Using OSLD Measurements for Total Body Irradiation

  • Choi, Chang Heon;Park, Jong Min;Park, So-Yeon;Chun, Minsoo;Han, Ji Hye;Cho, Jin Dong;Kim, Jung-in
    • Journal of Radiation Protection and Research
    • /
    • 제42권2호
    • /
    • pp.77-82
    • /
    • 2017
  • Background: This study aims to predict the midline dose based on the entrance and exit doses from optically stimulated luminescence detector (OSLD) measurements for total body irradiation (TBI). Materials and Methods: For TBI treatment, beam data sets were measured for 6 MV and 15 MV beams. To evaluate the tissue lateral effect of various thicknesses, the midline dose and peak dose were measured using a solid water phantom (SWP) and ion chamber. The entrance and exit doses were measured using OSLDs. OSLDs were attached onto the central beam axis at the entrance and exit surfaces of the phantom. The predicted midline dose was evaluated as the sum of the entrance and exit doses by OSLD measurement. The ratio of the entrance dose to the exit dose was evaluated at various thicknesses. Results and Discussion: The ratio of the peak dose to the midline dose was 1.12 for a 30 cm thick SWP at both energies. When the patient thickness is greater than 30 cm, the 15 MV should be used to ensure dose homogeneity. The ratio of the entrance dose to the exit dose was less than 1.0 for thicknesses of less than 30 cm and 40 cm at 6 MV and 15 MV, respectively. Therefore, the predicted midline dose can be underestimated for thinner body. At 15 MV, the ratios were approximately 1.06 for a thickness of 50 cm. In cases where adult patients are treated with the 15 MV photon beam, it is possible for the predicted midline dose to be overestimated for parts of the body with a thickness of 50 cm or greater. Conclusion: The predicted midline dose and OSLD-measured midline dose depend on the phantom thickness. For in-vivo dosimetry of TBI, the measurement dose should be corrected in order to accurately predict the midline dose.

광자선을 이용한 전신 및 반신조사의 선량분포에 관한 고찰 (A study on the dose distribution for total-body & hemibody irradiation using clinical photon beams)

  • 김진기;권형철;김정수;오영기;김기환;신교철;김정홍;박충기;정동혁
    • 한국의학물리학회지:의학물리
    • /
    • 제12권2호
    • /
    • pp.147-153
    • /
    • 2001
  • 방사선 전신 및 반신 조사방법을 방사선치료에 적용하여 균일한 선량 분포를 유도하고자 조사거리에서 선량측정, 조직결손에 따른 보상과 선량 보정 방법을 논의하였다. 의료용 선형가속기에서 발생된 6MV 광자선을 이용한 전신 조사시의 흡수선량을 결정하는, 선원과 조사면사이의 거리 변화에 따른 계산자료를 조사면의 중심축에서 고체 팬톰, RFA-7 물팬톰(Scanditronix, Sweden)에 대해 UNIDOS 전리함(PTW, Germany), THERADOS 전리함(Scanditronix, Sweden)을 이용한 측정으로 그 크기를 결정하였다. 조직보상체는 연판과 아크릴판을 이용하였다. 전신조사의 조건은 선원으로부터 380 cm의 거리에서 120 $\times$ 120 $cm^2$ ~ 152 $\times$ 152 $cm^2$ 의 조사면을 대상으로 하였다. 전신조사를 위한 기본 자료 측정에서 선원과 조사면의 거리 변화에 따른 흡수 선량 분포는 거리가 멀수록 더 증가하는 현상을 보였고, 조사면의 모서리부분은 약 10-20% 의 선량이 감소되었으나 굴곡좌위형 체위를 취함으로서 선량분포를 보완할 수 있었다. 연판과 아크릴판을 이용한 조직결손에 따른 보상체 제작으로 중심축 선량비를 $\pm$ 8% 이내로 감소시킬 수 있었다. 조직결손의 보상에 따른 선량계산을 고찰하여 임상 적용시 선량분포의 불균일성을 줄일 수 있었다.

  • PDF

미역 추출물로부터 충치 원인균, Streptococcus mutans에 대한 항균물질의 분리 및 동정 (Isolation and Identification of an Antibacterial Substance from Sea Mustard, Undaria pinnatifida, for Streptococcus mutans)

  • 윤소미;장준호;이종수
    • 한국식품영양과학회지
    • /
    • 제36권2호
    • /
    • pp.149-154
    • /
    • 2007
  • 건조 미역 10.4 kg을 acetone으로 추출, 여과한 다음 액-액 분배, 각종 크로마토그라피를 통하여 충치원인균, Streptococcus mutans에 대한 항균물질의 한 성분을 분리, 정제하고(160 mg, 수율 $1.5\times10^{-3}$%) 물질을 동정한 결과는 다음과 같다. 건조 미역 30 g 상당량의 추출액을 기준으로 용매 획분별 항균활성을 조사하였을 때, $CHCl_3$층이 73.2%로 가장 강하였고, hexane층이 62.0%이었으며, BuOH층이나 물층은 거의 없었다. 알루미나 칼럼에서는 산성 획분인 1% $NH_4OH:MeOH(1:1)$용매 획분이 81.0%의 항균활성을 나타내었으며, 실리카 칼럼에서는 $CHCl_3:MeOH(95:5)$용매에서 가장 높은 95.5%의 항균성을 나타내었고, ODS칼럼에서는 85% MeOH에서 96.4%의 항균성을 나타내었다. 최종적으로 ODS칼럼에서 95% MeOH를 이동상으로 하여 3개의 물질 S1(10 mg), S2(90 mg), S3(60 mg)을 분리 정제하였다. TLC에서 각 성분은 동일한 Rf값 0.42를 나타내어 동일한 물질로 추정되었으며, 이들을 메칠 유도체화한 성분들은 Rf값이 0.95로 바뀌어 이들 물질이 carboxyl기를 가지는 지방산으로 추정되었다. GC분석에서 표품 지방산과 비교한 결과, 이들은 $C_{18:4,n-3}$ 지방산과 retention time이 일치하였다. 또한, 메칠 유도체의 mass spectrum 분석 결과, m/z 290에 분자 이온 peak가 관측되어 $C_{18:4,n-3}$ 지방산의 methyl 유도체의 분자량과 일치하여, 이 물질을 3,6,9,12-octadecatetraenoic acid(stearidonic acid, $C_{18:4,n-3}$) 지방산으로 동정하였다.

저출력 노물리 시험에서의 감마 Background의 영향에 관한 연구 (A Study on the Effect of Gamma Background in Low Power Startup Physics Tests)

  • Bae, Chang-Joon;Lee, Ki-Bog
    • Nuclear Engineering and Technology
    • /
    • 제25권3호
    • /
    • pp.361-370
    • /
    • 1993
  • 국내 가압 경수로는 핵연료 재장전후 해당 주기 노심핵설계의 타당성 및 안선 제한치의 만족 여부를 확인하기 위하여 저출력에서 노물리 시험을 수행한다. 그러나 고리 3호기 7주기를 포함한 일부 저출력 노물리 시험 중 step 반응도를 삽입한 후에도 반응도가 서서히 증가하는 기이한 현상이 나타났다. 이러한 현상은 시험시 중성자속 준위가 낮고 노외 핵계측기로 비보상형 전리함을 사용하기 때문에 감마 background가 존재하여 생기는 것이다. 이로 인해 노물리 시험 결과는 많은 오차를 포함할 수도 있는 것이다. 본 연구에서는 반응도가 증가하는 현상을 정량적으로 분석하고 기준 제어봉 제어능 측정 시험을 모사함으로써 노물리 시험 결과의 오차를 줄일 수 있는 방법을 제시하고 이후의 노물리 시험에 적용하여 확인하였다. 또한 감마 background 준위를 산정한 후 중성자속 준위를 조정하여 기준 제어봉 제어능 측정 시험을 통해 감마 background의 영향을 받지 않는 중성자속 준위를 결정하였다. 결정된 중성자속 준위는 핵가열이 발생하는 중성자속의 3/10이다. 이것은 기존의 상한치보다 3배 증가된 것이다. 이 결과는 고리 4호기 7주기 및 영광 1호기 7주기 노물리 시험에 성공적으로 적용되었다.

  • PDF