• 한국전기전자재료학회논문지
• /
• 제25권6호
• /
• pp.481-485
• /
• 2012

ZnO nanowires were synthesized by hydrothermal technique. Prepared synthesis aqueous solutions were preserved by preheating in autoclave type synthesis equipment with various preheating time of 1 h difference. ITO-coated corning glass substrates deposited with AZO seed layers were then inserted in the preheated synthesis aqueous solutions and ZnO nanowires were grown for 180 min at $90^{\circ}C$. Density, length and aspect ratio of the grown ZnO nanowires were investigated. Composition, structural and optical properties of the grown ZnO nanowires were analyzed. Characteristics of the ZnO nanowires were comparatively studied in relation with $Zn^{2+}$ ion concentration measured directly after the preheating of synthesis aqueous solution.

• 한국표면공학회지
• /
• 제27권3호
• /
• pp.143-148
• /
• 1994

Effects of process variables of HCD ion plating on the film composition of Ti(C, N) were analyzed. The mole ratio of carbon to nitrogen and that of non-metal to titanium in the film primarily depend on the partial pressure ratio of ($C-2H_2$/ $N_2$) and total reactive gas pressure, respectively. The amount of nonmetallic com-ponents increases in nonlinear fashion as the total gas pressure due to the different reactivity of $C-2H_2$ and $N_2$ gases with Ti. The nonmetallic components was saturated dwith nitrogen when the nitrogen gas was more than 60% of total reactive gas. These two process variables could be related systematically using the concept of effective pressure in which the difference of reactivity of each gas was normalized.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.51-52
• /
• 2016

This paper researches the Chloride Binding of Cement Paste according to the Ca/Si and Ca/Al Ratio. The mechanisms of chloride ion binding are not completely known, although it is believed that Alumina contents in cementitious system have an important role. For changing cement paste composition, Ordinary Portland Cement(OPC) paste is substituted by Granulated Ground Blast Slag(GGBS). With increasing the ratio of GGBS substitution(Thus alumina contents is increasing), The chloride binding capacity has a tendency to increase of binding chloride ion capacity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.133-135
• /
• 2006

SBN60 and SBN60/30 thin films were deposited by ion beam sputtering technique. Using the ceramic target of the same composition and Pt(100)/$TiO_2$/$SiO_2$/Si or Pt(111)/Ti/$SiO_2$/Si substrate, crystallization and orientation behavior as well as electric properties of the films were examined, Thickness was controlled to $3000{\AA}$ and the films were heat-treated at $650^{\circ}C{\sim}800^{\circ}C$. The orientation and crystallization behavior were observed which showed the dependence on processing condition($O_2$/Ar ratio, substrate temp, annealing temp...).

• Archives of Pharmacal Research
• /
• 제27권12호
• /
• pp.1295-1301
• /
• 2004

The enantiomeric composition tests on flurbiprofen and ketoprofen present in patch products and in urine excretions following patch applications were performed as diastereomeric (R)-(+)- 1-phenylethylamides by achiral gas chromatography and by gas chromatography-mass spectrometry in selected ion monitoring mode. The method for determination of (R)- and (S)-enantiomers in the range from 0.1 to 5.0 ${\mu}$g was linear (r ${\ge}$ 0.9996) with acceptable precision (% RSD ${\le}$5.2) and accuracy (% RE = 0.6 ~ -2.4). The enantiomeric compositions of flurbiprofen in one patch product and of ketoprofen in five different products were identified to be racemic with relatively good precision (${\le}$ 6.4%). The urinary excretion level of (R)-flurbiprofen was two times higher than its antipode, while the comparable excretion levels of (R)- and (S)-enantiomers for ketoprofen were observed.

• 한국진공학회지
• /
• 제7권s1호
• /
• pp.118-122
• /
• 1998

$Al_2O_x$(0$Al_2O_3$ gradient coatings were formed by evaporating pure aluminium(99.9%) in $O_2$ environment with an IBAD facility, 12keV $Ar^+$ was used to irradiate the coatings simultaneously during the deposition. Sample's composition and depth profile were analysed by RBS and AES measurement, and their microhardness and porosity property were also measured in the experiment. Results show that, the oxygen concentration in the deposited coatings has a nearly linear relationship with the inputting gas flow before $O_2$ partial pressure in the target chamber reaches $1.2\times10^{-3}$ mbar under which stoichiometric $Al_2O_3$ could be formed; and sample's microhardness and porosity property is affected significantly by the oxygen concentration in the coatings.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.695-698
• /
• 2000

This paper present the result of the investigation, the distribution of salt contamination with the influence of geographical condition. To get the ESDD data, a conventional brush washing method was adapted, and IC(ion chromatography) was used to measure the quantity of anions, such as Cl$\^$-/ and SO$_4$$\^$2-/. And we make an analysis on the distribution of salt contamination with the increase of distance from shore. With 10 month ESDD data, we seek the 95% ESDD value with interpolation method. With these analyses, we had obtained the formulation concerned with the distance from sea. And could know the composition of contamination.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.361-364
• /
• 2000

Antimony doped tin oxide (ATO) thin films were deposited at room temperature by reactive ion-beam sputter deposition (IBSD) technique in oxidizing atmosphere utilizing Sb and Sn metal targets. Effect of Sb doping concentration, film thickness and heat treatment on electrical and optical properties was investigated. The thickness of as-deposited films was controlled approximately to 1500 $\AA$ or 2000$\AA$, and Sb concentration to 10.8 and 14.9 wt%, as determined by SEM and XPS analyses. Heat treatment was performed at the temperature from 40$0^{\circ}C$ to 80$0^{\circ}C$ in flowing $O_2$or forming gas. The resulting ATO films showed widely changing electrical resistivity and optical transmittance values in the visible spectrum depending on the composition, thickness and firing condition.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.440-443
• /
• 1999

The morphology and composition of anodic films, formed on aluminium at various current densities, in the range 1-$100{\;}Am^{-2}$, in the molten bisulphate melt at different temperatures (418-498K), have been studied using transmission electron microscopy of ultramicrotomed film sections, and ion beam thinned films. From the structural analysis of the electron diffraction patterns taken from the ultramicrotomed sections and ion beam thinned films, it can be concluded that the crystal modification process from ${\gamma}-Al_2O_3{\;}to{\;}{\alpha}-Al_2O_3$ proceeds in the following steps : (equation omitted)

• 한국표면공학회지
• /
• 제25권3호
• /
• pp.133-143
• /
• 1992

Titanium nitride(TiN) films have been prepared by HCD plasma enhanced reactive ion plating. Density and temperature of the plasma generated by the HCD were investigated. It was shown that parameters such as the substrate bias voltage(0 350V) and N2 flow rate(10 180SCCM) influenced the growth, the growth, the microstructure and the color tone of the film mostly. In order to study the interface region, surface analysis by AES combined with sputter depth profiling was performed. Microhardness of the coated TiN films were measured by micro Vickers hardness tester. Also, the effect of coating parameters on composition, coating surface and fracture morphology, grain size and growth rate were examined.