• Journal of radiological science and technology
• /
• v.21 no.2
• /
• pp.43-46
• /
• 1998

When a patient was irradiated with prosthetic hip, the dose distribution was changed according to inhomogeneous materials. The density, effective atomic number, and the composition of material had influence on absorbed dose distribution. In this study, the influence of inhomogeneous material(Ti) was measured using a polyethylene phantom, which consisted of various diameter of titanium, with film dosimetry. As a result, the backward dose showed 29.5% increas by backscattering, the forward dose showed 28% decreas by absorption, and the side dose showed 7% increas by scattering, when 25 mm diameter Ti was used. In addition forward dose was in inverse proportion to the thickness of prosthetic material. When the prosthetic hip of patient is in an irradiated field, we must carefully study the absorbed dose distribution.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.10
• /
• pp.64-72
• /
• 1995

In this paper, atmospheric turbulence and absorption under clear weather condition, which affect the optical satellite up-link communication between geo-satellites and earth station, were studied. In case of the up-link communication, the received optical power is weakened by pointing loss caused by beam tilt which is the main effect of turbulent atmosphere. This pointing loss directly has relation to the diameter of optical transmitting antenna. From the inverse proportion of the pointing and spaced loss, it is the regions where the diameter of transmitting antenna increases abruptly and the efficient design of transmitting antenna is impossible. In case of using channel coding, it was shown that the peak value of diameter moved to the lower regions of elevation angle with increasing the coding gain and its width was also decreased. In case of considering both coding gain and transmission rate on the design of transmitting antenna, it was known that more coding gain was necessary as transmission rate was increased.

• Structural Engineering and Mechanics
• /
• v.4 no.3
• /
• pp.313-329
• /
• 1996

A mathematical model of a cable as a system of interacting wires with interwire friction taken into account is presented in this paper. The effect of friction forces and the interwire slip on the mechanical properties of tension cables is investigated. It is shown that the slip occurs due to the twisting and bending deformations of wires, and it occurs in the form of micro-slips at the contact patches and macro-slips along the cable. The latter slipping starts near the terminals and propagates towards the middle of the cable with the increase of tension, and its propagation is proportional to the load. As the result of dry friction, the load-elongation characteristics of the cable become quadratic. The energy losses during the extension are shown to be proportional to the cube of the load and in inverse proportion to the friction force, a result qualitatively similar to that for lap joints. Presented examples show that the model is in qualitative agreement with the known experimental data.

• Structural Engineering and Mechanics
• /
• v.4 no.3
• /
• pp.330-344
• /
• 1996

A model of a cable comprising interacting wires with dry friction forces at the interfaces is subjected to a quasi-static cyclic loading. The first cycle of this process, comprising of axial loading, unloading and reloading is investigated analytically. Explicit load-elongation relationships are obtained for all of the above phases of the cycle. An expression for the hysteretic losses is also obtained in an explicit form. It is shown that losses are proportional to the third power of the amplitude of the oscillating axial force, and are in inverse proportion to the interwire friction forces. The results obtained are used to introduce a model of a cable as a solid rod with an equivalent stiffness and damping properties of the rod material. It is shown that the stiffness of the equivalent rod is weakly nonlinear, whereas the viscous damping coefficient is proportional to the amplitude of the oscillation. Some numerical results illustrating the effect of cable parameters on the losses are given.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.177-180
• /
• 2005

The specified tensile strength provided by the manufacturer is determined on the basis of the reliable lower limit ($X-3{\sigma}$ : X=average tensile strength, $\sigma$=standard deviation) obtained from the material test results. Most of these data, however, are based on the test results of 1 layer of FRP sheet. Also, the partial strength reduction factor for strengthening RC members with FRP is based on the small-scale model tests. But, the failure mechanisms of small-scale model tests are reported to be different from those of the full-scale tests. This paper present the test results of full-scale RC beams strengthened with multi-layer GFRP sheets up to 3 layer as well as the material tests. From the material tests, it was observed that the average tensile strengths of GFRP sheets are decreased as the number of layer are increased. Also the premature debonding failure of RC beams strengthened with multi-layer GFRP sheets are observed in inverse proportion to the number of GFRP sheets

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.693-696
• /
• 2003

Piezoelectric ceramics were made by a doctor blade methode and piezoelectric fans were fabricated by sandwiched a slim and long metal between two layers of ceramics. A maximum displacement of piezoelectric fan occurs in the resonance frequency of a long metal and the resonance frequency of them is in inverse proportion to the square of a length of metal. The piezoelectric fan made from a wide and thin piezoelectric ceramics($13{\times}0.2{\times}30mm^3$) showed a maximum displacement in all samples, and the maximum displacement was about 20mm in a commercial power (200V, 60Hz of sine wave).

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.4
• /
• pp.33-40
• /
• 1991

The decrease in surface roughness of work roll and steel strip in cold rolling of low carbon steel strip has been investigated by working distance, materials, total separating force and total reduction ratio. The main results are as follows; For the same lubricating conditions. 1) The changing of surface roughness of steel strip were similar to work roll. The transcription ratio is in inverse proportion to the carbon content of steel strip. 2) The surface roughness of steel strip is hardly change according to changing of total separating force and total reduction ration. 3) The wear of work rolls surface is more rapid in that case of continuous casted steel strip than ingot casted steel strip. The aluminium content dull powder adhere on the rolls surface, and so. It makes the mirror surface of work roll accelerate.

• Proceedings of the KSPS conference
• /
• 2007.05a
• /
• pp.281-284
• /
• 2007

This experimental study aims to find out the correlation between semantic predictability and pitch-accent realization. For the experiment, we classified the predictability into three degrees: unpredictable, implicitly predictable, and explicitly predictable. And then each degree divided into to two subcatergories: one is adverbs/adverbial phrases of time or place and the other one is not time or place adverbs/adverbial phrases. The materials used in the experiment were 9 sentences for the each subcategory. One male and one female English native speakers participated in this experiment. Their reading speeches were recorded on Digital Audio Tape. Their speech data were analyzed by using Pitchworks program. The results of this experiment show pitch accented ratio is somewhat in inverse proportion to the degree of predictability.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.172-177
• /
• 2007

In this paper, spherical aberration and light concentrating efficiency of lens was measured. The measuring system is applying spherical aberration occurrence principal and could measure a temperature at focal plane by using the thermocouple. The sun which is located in infinite distance and could makes parallel ray is used as a illuminant or heat source in experiments. It is confirmed that light concentrating efficiency of optical lens is in inverse proportion to spherical aberration and.

• Journal of Environmental Science International
• /
• v.14 no.3
• /
• pp.289-296
• /
• 2005

In this study aims is water supply criteria relations for evaluating the possible performance of water resources systems. These measures describe how likely a systems is to fail(reliability), how quickly it recovers from failure(resiliency), and how severe the consequences of failure may be(vulnerability). The performance of a criteria evaluating with a variety of operating policies illustrates their use. As a result study frequency reliability and quantitative reliability is linear relations and quantitative reliability is high reliability for equality water supply policy. As reliability and vulnerability are in inverse proportion to each other. Therefore these criteria relation analysis can be for Imha dam to variety water supply policy.