• Journal of the Korean Society of Systems Engineering
• /
• v.11 no.2
• /
• pp.125-135
• /
• 2015

Various methods have been used for safety and reliability as it becomes more difficult to ensure safety owing to the increasing complexity and scale of systems. This study aims at making it easier and more efficient to discuss risks and countermeasures for completeness, review, and knowledge transfer by improving methods to create fault tree analyses which focus on the GSN [1], which are among the methods used to describe assurance cases. More specifically, the purpose of this study is to incorporate strategy and context, GSN concepts, along with reason, which is a new concept, into FTA; the study focuses on three points. One point is support for the safety designer to draw a mutually exclusive and collectively exhaustive (MECE) FTA. The second is to make it easier to understand diagrams and meanings of FTA compared with the usual methods. The third is to make creating an FTA more efficient and to pass on existing know-how. Eventually, FTA can achieve completeness, review, and knowledge transfer. An introduction is provided in the first section. Next, the methodology covered in this paper is explained in the second section. The third section describes the proposed notation method based on two proposals made in this paper. In the fourth and fifth sections, results and discussion are provided, respectively. Finally, in the sixth section, conclusions are described.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.173-181
• /
• 2006

Many isolated bridges are designed and constructed after the introduction of the seismic design. However those bridges designed in engineering fields have unnecessarily high serviceability limit and brittle failure mechanism, which do not satisfy the seismic design concept. Such design results are due to the excessive substructure stiffness of the conventional design method as well as the misunderstanding of the seismic design method. In this study an isolated bridge designed with the conventional design method is selected and the same bridge with steel bearings is modelled for the comparative seismic design. From the comparison, the seismic design procedures satisfying the required performance levels are provided for the two bridges. It is confirmed that the isolated bridge requires more complicated design procedure with trial and error methods and reanalyses but provides higher serviceability limit compared to the bridge with steel bearings. However, because the required serviceability limit can also be obtained by adjusting substructure stiffness, it is a resonable seismic design process that an isolated bridge is to be considered as an alternative design when the ductile failure mechanism is not obtained with a bridge with steel bearings.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.84-87
• /
• 2008

In order to maximize the effect of installing screen door system while to minimize the problems in an initial stage of introduction, it is strongly required to research an optimum installation solution in connection with ventilation and disaster prevention system alongside with safety structure analysis of screen door in respect to train-induced wind, as well as to develop the criteria for the operation after the installation. This paper presents the results of study to develop the optimum design technology in urban railway equipped with platform screen door systems.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.436-440
• /
• 2008

Evaluating the work process of the organization is necessary to improve efficiency and make high quality of results. As size of construction projects are bigger, it is also applied to design firm. By applying efficient process, design team can reduce rework and waste. To make systematic process and keep a continuous progress, process evaluation is required. On this study, CMMI(Capability Maturity Model Integration) concept is benchmarked. Originally CMMI is suggested to evaluating capability of work process of Soft Ware developing organization by SEI(Software Engineering Institute). From CMMI system, direction of making evaluating method of design project performing team is drove. After worked out the evaluation method of capability maturity of process in design team, it could contribute making progress in the design process and satisfying client.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.220-230
• /
• 2015

Rolling stock RAMS is a field of engineering which integrates reliability, availability, maintainability and safety (RAMS) characteristics into an inherent product design property through rolling stock system engineering process. It is implemented to achieve operational objectives successfully, and recently the RAMS has become a rapidly growing engineering discipline because it has a great potential to ensure safety and improve cost effectiveness. However, the Korean rolling stock industry has not yet implemented RAMS management in the rolling stock engineering process, despite the issue having been addressed since the introduction of the KTX. Thus, this paper discusses the processes, methods and techniques for RAMS assessment in three parts. Firstly, it outlines a process of the overall RAMS performance assessment for achieving technical RAMS design criteria. Secondly, it discusses a process for assessing the operational RAM and allocating the RAM. This paper also proposes a model for assessing safety-based risk management, which includes five analytic techniques for identifying the causes and consequences of a system failure. Finally, a case example is provided for the risk assessment of the pneumatic braking device.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.127-135
• /
• 2015

Universal design is defined as the design process of products and environments usable by all people to the greatest extent possible, without the need for adaptation or specialized design. The benefits of universal design have been promoted primarily through illustrative 'success stories' of public, residential and occupational environments and products. While case examples may be informative, they may unfortunately be limited in terms of generality to other designs or tasks. Therefore, design methods and criteria that can be applied systematically in a range of situations to encourage universal design are needed. In addition, the seven principles of universal design are intended to guide the design process. The principles provide a framework that allows a systematic evaluation of new or existing designs and assists in educating both designers and consumers about the characteristics of more usable products and environments. However, exactly how these principles are incorporated into the design process has beenleft up to the designer. Since the introduction of universal design, designers have become familiar with the principles of universal design, and they have developed many products based on universal design. However, the principles of universal design are qualitative, which means designers cannot quantitatively evaluate their designs. Some have worked to develop more systematic ways to evaluate products and environments by providing design guidelines for each of the principles. However, recommendations have not yet been made regarding how to integrate performance measures of universal design into the product design process before the product is mass produced. Furthermore, there are sets of requirements regarding each user group that has different age and ability. Consequently, there is an urgent need for design methods, based on a better understanding of age and ability related factors, which will lead to a universally designed product or environment. The authors have proposed the PSD (Preference Set-Based Design) method that can generate a ranged set of feasible solutions (i.e., robust and flexible solution set) instead of single point solution that satisfies changing sets of design targets. The objective of this paper is to develop a general method for systematically supporting the universal design process. This paper proposes the applicability of PSD method to universal design. Here, the proposed method is successfully illustrated with a universal design problem.

• Wind and Structures
• /
• v.35 no.3
• /
• pp.213-227
• /
• 2022

The design of a building is a complex process that encompasses different fields: one of the most relevant is nowadays the energetic one, which has led to the introduction of new typologies of building envelopes. Among them, the Permeable Double Skin Façades (PDSF) are capable to reduce the solar impact and so to improve the energetic performances of the building. However, the aerodynamic characterization of a building with a PDSF is still little investigated in the current literature. The present paper proposes an experimental study to highlight the modifications induced by the outer porous façade in the aerodynamics of a building. A dedicated wind tunnel study is conducted on a rigid model of a prismatic high-rise building, where different façade configurations are tested. Specifically, the single-layer façade is compared to two PDSFs, the former realized with perforated metal and the latter with expanded metal. Outcomes of the tests allow estimating the cladding loads for all the configurations, quantifying the shielding effects ascribable to the porous layers that are translated in a significant reduction of the design pressure that could be up to 50%. Moreover, the impact of the PDSFs on the vortex shedding is investigated, suggesting the capability of the façade to suppress the generation of synchronised vortices and so mitigate the structural response of the building.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.1
• /
• pp.54-67
• /
• 2003

In this paper, a novel estimation technique for a robust adaptive control scheme is presented for a class of uncertain nonlinear systems with a general set of uncertainty. For a class of introduced more extended semi-strict feedback forms which generalize the systems studied in recent years, a novel estimation technique is proposed to estimate the states of the fully nonlinear unmodeled dynamics without stringent conditions. With the introduction of powerful functions, the estimation error can be tuned to a desired small region around the origin via the estimator parameters. In addition, with some effective functions, a modified adaptive backstepping for dynamic uncertainties is presented to drive the output to an arbitrarily small region around the origin by an appropriate choice of the design parameters. With our proposed schemes, we can remove or relax the assumptions of the existing results.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.3
• /
• pp.168-180
• /
• 2022

The IMO has decided to proceed with the early introduction of EEDI Phase 3, a CO₂ emission regulation to prevent global warming. Measures to reduce CO₂ emissions for ships that can be applied immediately are required to achieve CO₂ reduction. We set six different CO₂ emission scenarios according to the type of ship and fuel, and designed a monoethanolamine-based CO₂ capture process for ships using a rate-based model of Aspen Plus v10. The simulation model using Aspen Plus was validated using pilot plant operation data. A ship inevitably tilts during operation, and the performance of a tilted column decreases as its height increases. When configuring the conventional CO₂ capture process, we considered that the required column heights were so high that performance degradation was unavoidable when the process was implemented on a ship. We applied a parallel column concept to lower the column height and to enable easy installation and operation on a ship. Simulations of the parallel column confirmed that the required column height was lowered to less than 3 TEU (7.8 m).

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.797-800
• /
• 2007

Value Engineering(VE) is being applied as an useful tool to eliminate the waste of cost and noneffective factors previously in construction projects. Ministry of construction and transportation' has been accordingly enforcing extensionally design phase VE to the construction costing more than 10 billion won, an importance of design phase VE. Although there are legal supports and technical effects, an effect about an introduction of design phase VE can not be applied properly because of several problems at the process. So, in this study, try to find out competency factors of design phase VE to enforce a competency of VE team as a basic database for developing a check list, and estimate weight. For the result, find out a competency evaluation item and organize as a team knowledge, a team work skill and a team attitude. Perform a first survey to verify a reliability and propriety regarding the found competency evaluation, perform the second survey competency as to evaluation item of the found 1, 2, 3 class and then estimate the weight by AHP.