• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.133-142
• /
• 2018

Increasing localized torrential rainfall caused by abnormal climate are making higher damage to human and property through urban inundation So The need of preventive measures is being highlighted. In this study, the methodology for calculating flood depth in domestic water map using an interpolation method in order to utilizing the results of flood analysis provided only in the form of a report is suggested. In the Incheon Metropolitan City S area as the test-bed, the flood depth was calculated using the interpolating the actual flood analysis by image and verification was performed. Verification results showed that the error rate was 5.2% for the maximum flooding depth, and that the water depth value was compared to 10 random points, which showed a difference of less than 0.030 m. Also, as the results of the flood analysis were presented in various ways, the flood depth was extracted from the image of the result of the flood analysis, which changed the presentation method, and then compared and analyzed. The results of this study could be available for the use of basic data from the research on the urban penetration of domestic consumption and for decision-making of policy.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.1
• /
• pp.67-74
• /
• 2022

To analyze the motion of aircraft through computing the dynamics equations, true airspeed is essential for obtaining aerodynamic loads. Although the airspeed is measured by on-board instruments such as pitot tubes, measurement data are difficult to obtain for commercial flights because they include sensitive data about the airline operations. One of the commonly available trajectory data, Automatic Dependent Surveillance-Broadcast data, provide aircraft's speed in the form of ground speed. The ground speed is a vector sum of the local wind velocity and the true airspeed. This paper present a method to estimate true airspeed by combining the trajectory, meteorological, and topology data available to the public. To integrate each data, we first matched the coordinate system and then unified the altitude reference to the mean sea level. We calculated the wind vector for all trajectory points by interpolating from the lower resolution grid of the meteorological data. Finally, we calculate the true airspeed from the ground speed and the wind vector. These processes were applied to several sample trajectories with corresponding meteorological data and the topology data, and the estimated true airspeeds are presented.

• Journal of the Korean association of regional geographers
• /
• v.9 no.2
• /
• pp.203-216
• /
• 2003

The process of constructing coastal digital elevation model(DEM), for the 3 dimensional analysis, is composed by abstracting land layers for land elevation and water depth, reprojecting UTM, relocating geographical grid, and interpolating works. The geomorphic set of shallow sea, including tidal current, tidal zone deposition, and water depth distribution, was analyzed by eye search of Landsat TM image, masking of land zone, band combination and regression analysis. Some horizontal differences, between combined DEM and surveyed data of shallow sea, was corrected for analysis. Analyzed geomorphic elements are stream channel, alluvial fan, coastal terrace, tidal current. and shallow sea bank. Results of analysis present that transported fluvial materials influence tidal sedimentation, especially from Gahwacheon river, for the role of artificial draining flooding waters from Jinyang Reservoir, almost in the summer season. In the coastal area with less tidal current, more fine materials are deposited. The influence of currental deposition are higher on small pockets with west coast of well developed terraces. The lower skirt of alluvial fans developed into the tidal zone of shallow sea. Small pocket type bays are closed by coastal current, and less influenced from tidal deposition. The bank of Jinju Bay are developed originally from submerging of remnant erosional mountain ranges, and play on the role of trapping fine materials.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.7
• /
• pp.619-628
• /
• 2000

Abstract Perspective views provide a powerful depth cue and thus aid the interpretation of complicated images. The main drawback of current perspective volume rendering is the long execution time. In this paper, we present an efficient perspective volume rendering algorithm based on coherency between rays. Two sets of templates are built for the rays cast from horizontal and vertical scanlines in the intermediate image which is parallel to one of volume faces. Each sample along a ray is calculated by interpolating neighboring voxels with the pre-computed weights in the templates. We also solve the problem of uneven sampling rate due to perspective ray divergence by building more templates for the regions far away from a viewpoint. Since our algorithm operates in object-order, it can avoid redundant access to each voxel and exploit spatial data coherency by using run-length encoded volume. Experimental results show that the use of templates and the object-order processing with run-length encoded volume provide speedups, compared to the other approaches. Additionally, the image quality of our algorithm improves by solving uneven sampling rate due to perspective ray di vergence.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.469-479
• /
• 2014

N-RTK(Network based RTK) methods are able to improve the accuracy of GNSS positioning results through modelling of the distance-dependent error sources(i.e. primarily the ionospheric and tropospheric delays and orbit errors). In this study, the comparison of the TTFF(Time-To-Fix-First ambiguity), accuracy and discrepancies in horizontal/vertical components of N-RTK methods(VRS and FKP) with the static GNSS at 20 Unified Control Stations covering Incheon metropolitan city area during solar storms(Solar cycle 24 period) were performed. The results showed that the best method, compared with the statics GNSS survey, is the VRS, followed by the FKP, but vertical components of both VRS and FKP were approximately two times bigger than horizontal components. The reason for this is considered as the ionospheric scintillation because of irregularities in electron density, and the tropospheric scintillation because of fluctuations on the refractive index take the place. When the TTFF at each station for each technique used, VRS gave shorter initialization time than FKP. The possible reasons for this result might be the inherent differences in principles, errors in characteristics of different correction networks, interpolating errors of FKP parameters according to the non-linear variation of the dispersive and non-dispersive errors at rover when considering both domestic mobile communication infra and the standardized high-compact data format for N-RTK. Also, those test results revealed degradation of positing accuracy, long initialization time, and sudden re-initialization, but more failures to resolve ambiguity during space weather events caused by Sunspot activity and solar flares.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.1
• /
• pp.16-22
• /
• 2012

In this paper, we proposed a method of baseline correction for analysis of Raman spectra of platelets from Alzheimer's disease (AD) transgenic mice. Measured Raman spectra include the meaningful information and unnecessary noise which is composed of baseline and additive noise. The Raman spectrum is divided into the local region including several peaks and the spectrum of the region is modeled by curve fitting using Gaussian model. The additive noise is clearly removed from the process of replacing the original spectrum with the fitted model. The baseline correction after interpolating the local minima of the fitted model with linear, piecewise cubic Hermite and cubic spline algorithm. The baseline corrected models extract the feature with principal component analysis (PCA). The classification result of support vector machine (SVM) and maximum $a$ posteriori probability (MAP) using linear interpolation method showed the good performance about overall number of principal components, especially SVM gave the best performance which is about 97.3% true classification average rate in case of piecewise cubic Hermite algorithm and 5 principal components. In addition, it confirmed that the proposed baseline correction method compared with the previous research result could be effectively applied in the analysis of the Raman spectra of platelet.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.49-58
• /
• 2006

In this paper, a curve-fitting channel estimation method is proposed for orthogonal frequency division multiplexing (OFDM) system in a time-varying frequency-selective fading channel. The method can greatly improve channel state information (CSI) estimation accuracy by performing smoothing and interpolation through consecutive curve-fitting processes in both time domain and frequency domain. It first evaluates least-squares (LS) estimates using pilot symbols and then the estimates are approximated to a polynomial with proper degree in the LS error sense, starting from one preferred domain in which pilots we densely distributed. Smoothing, interpolation, and prediction are performed subsequently to obtain CSI estimates for data transmission. The channel estimation processes are completed by smoothing and interpolating CSI estimates in the other domain once again using the channel estimates obtained in one domain. The performance of proposed method is influenced heavily on the time variation and frequency selectivity of channel and pilot arrangement. Hence, a proper degree of polynomial and an optimum approximation interval according to various system and channel conditions are required for curve-fitting. From extensive simulation results in various channel environments, we see that the proposed method performs better than the conventional methods including the optimal Wiener filtering method, in terms of the mean square error (MSE) and bit error rate (BER).

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.2
• /
• pp.181-190
• /
• 2007

The linkage framework of surface geometric modeling based on the NURBS and shell finite element analysis is developed in this study. In the geometrically exact shell finite element analysis, the accuracy of the analysis strongly depends upon the accurate computation of the surface geometric quantities. Therefore if we obtain the necessary geometric quantities from the NVRBS surface equation, it's possible to construct the effective linkage framework of surface modeling in the CAD systems and shell finite element analysis using geometrically exact shell finite element. Besides, the linkage framework can be applied to the analysis of general and complex surfaces as well as simple surfaces. In this study, the shell surfaces are generated by interpolating given set of data points based on the NURBS surfaces. These data points usually can be obtained from surface scanning. But the representations of the generated NURBS surface are not same to one another. The accuracy depends on the chosen parameterization methods used in NURBS. Therefore, it is needed to select the suitable parameterization method according to the geometry of the surfaces. To verify the performance and accuracy of our developed linkage framework, we solve several well-known benchmark problems and assess the performance of the developed method.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.8
• /
• pp.35-44
• /
• 2014

This paper proposes a 3D pointing interface that is designed for the efficient application of a hand mouse. The proposed method uses depth images to secure high-quality results even in response to changes in lighting and environmental conditions and uses the normal vector of the palm of the hand to perform 3D pointing. First, the hand region is detected and tracked using the existing conventional method; based on the information thus obtained, the region of the palm is predicted and the region of interest is obtained. Once the region of interest has been identified, this region is approximated by the plane equation and the normal vector is extracted. Next, to ensure stable control, interpolation is performed using the extracted normal vector and the intersection point is detected. For stability and efficiency, the dynamic weight using the sigmoid function is applied to the above detected intersection point, and finally, this is converted into the 2D coordinate system. This paper explains the methods of detecting the region of interest and the direction vector and proposes a method of interpolating and applying the dynamic weight in order to stabilize control. Lastly, qualitative and quantitative analyses are performed on the proposed 3D pointing method to verify its ability to deliver stable control.

• Journal of the HCI Society of Korea
• /
• v.1 no.1
• /
• pp.1-8
• /
• 2006

We suggest a graphical representation of the tension flow in tonal music using a piecewise parametric curve, which is a function of time illustrating the changing degree of tension in a corresponding chord progression. The tension curve can be edited by using conventional curve editing techniques to reharmonize the original music with reflecting the user's demand to control the tension of music. We introduce three different methods to measure the tension of a chord in terms of a specific key, which can be used to represent the tension of the chord numerically. Then, by interpolating the series of numerical tension values, a tension curve is constructed. In this paper, we show the tension curve editing method can be effectively used in several interesting applications: enhancing or weakening the overall feeling of tension in a whole song, the local control of tension in a specific region of music, the progressive transition of tension flow from source to target chord progressions, and natural connection of two songs with maintaining the smoothness of the tension flow. Our work shows the possibility of controlling the perceptual factor (tension) in music by using numerical methods. Most of the computations used in this paper are not expensive so they can be calculated in real time. We think that an interesting application of our method is an interactive modification of tension in background music according to the user's emotion or current scenario in the interactive environments such as games.