• 무역상무연구
• /
• 제68권
• /
• pp.123-148
• /
• 2015

Central Asian Countries had been independent in 1991 from USSR. Since then it have been increasing foreign trade and investment amount with outside countries including China, Japan, EU and South Korea. Korean enterprises and entities have endeavored to secure plentiful natural resources, oil and gas energy and expand the market share to exporting the consuming and industrial competitive goods and services for those countries. In the case of disputes of commercial transactions and investment, arbitration is regarded as a dispute resolution system which has been preferred in international transactions and investments by the business world. Since the collapse of the USSR, Central Asian Countries have worked to modernize its arbitration law and procedure to conform with international standard rules. Arbitral legislation in Central Asian countries is based on the Model Law as adopted in 1985. However, CIS's legislation systems of arbitration are not satisfied with the international standard in national laws and practices. That is the reason to consider for the specific parliament about arbitration for the dispute resolutions in the commercial transaction and investment between Korean enterprises and CIS. In this article, it is discuss problems and its alternatives in the dispute resolution about the commercial transaction and investment into Central Asian countries including the tendency to the increasing the trade volumes of goods and investment between South Korea and CIS. According to this article, South Korea consider the long term strategy followed the preferred economic relative partnership for business success on commercial transaction and investment with the Central Asian Countries.

• 한국건설관리학회논문집
• /
• 제18권6호
• /
• pp.65-77
• /
• 2017

최근 대형 건설회사의 해외시장 비중 확대와 함께 해외 프로젝트에서의 공기지연에 따른 경영 손실에 대한 이슈가 지속적으로 제기되고 있다. 일반적으로 대형 프로젝트의 수행 과정에서 변경은 필연적으로 발생한다. 대부분의 변경은 공기지연과 연결되기 때문에 변경으로 인하여 공기연장이 필요한 경우 건설사는 계약에서 정한 기준에 따라 공기지연을 관리해야 공기지연에 따른 리스크에 효과적으로 대응할 수 있다. 공기지연을 유발하는 변경에 대한 계약적 대응이 부족할 경우 클레임이 해결되지 않고 분쟁으로 확대되는 경우가 많다. 프로젝트 초기 단계에 계약에서 요구하는 공기지연 관리 절차와 방법을 분석하는 것이 중요하나 이에 대한 방법 및 도구를 제시하지 못하고 있었다. 본 논문에서는 국내 주요 건설사들의 공정관리 실무 및 해외 공사에서의 클레임 및 분쟁사례에 대한 고찰을 통해 문제를 제시하고 해외 건설 계약조건상에 포함된 공기지연 관리 리스크를 평가할 수 있는 방법을 제시하였다. 공기지연의 합리적 대응과 관련된 계약조건상의 리스크 평가 틀을 제시하기 위하여 FIDIC Red Book(1999), PSSCOC(2014) 및 SIA 9th Edition(2010) 등 국제 표준 계약조건 뿐만 아니라 ARAMCO 및 QP를 포함한 해외 대형 발주자의 표준계약조건에 나타나 있는 공기지연 관리 요건 및 수준을 검토하여 전체 7개 영역, 62개 항목으로 구성된 계약조건 리스크 평가모델을 제안하였다. 계약조건 리스크 평가 모델은 계약조건상의 공기지연리스크 확인을 위한 구조적 틀을 제공하며 개별 리스크 항목별 표준적인 수준을 제시함으로써 해당 프로젝트의 리스크 수준을 확인하고 이에 효과적으로 대응할 수 있는 단초를 제공한다. 제안된 모델의 유효성 검증을 위하여 실제 제안한 모델을 실제 프로젝트에 적용하여 그 효과를 입증하였다.

• 한국항만학회지
• /
• 제14권1호
• /
• pp.77-86
• /
• 2000

The planning process of complex projects in oceanic architectural engineering is characterized by the cooperation of many involved specialists and by a high degree of information exchange. In order to improve the quality of the structural design of oceanic buildings, information of different involved partners in the planning process has to be integrated. This paper aims to introduce a concept of the integrated structural design for the floating-type oceanic building using STEP(Standard for the Exchange of Product Model Data). STEP(ISO 10303) is an international standard for the computer-interpretable representation and exchange of product data and it provides a consistent data exchange format and application interfaces between different application systems. In this paper, the structural design process and information of oceanic buildings is analyzed and product models are preposed fir the exchange of the structural design information between superstructure and floating structure. The entities for calculating wind loads, metacenter and restoring forces are represented by Express. As a case study a floating hotel is applicated to describe the STEP physical file.

• 한국환경과학회지
• /
• 제8권1호
• /
• pp.135-144
• /
• 1999

Air quality modeling about coastal urban region such as Pusan shoud be consider shipping source emmited from ships anchoraging and running. It has been proved at our previous studies that the ratios of air pollutants emission amount in coastal area to inland are 12.2% for NO$_2$ and 11.7% for $SO_2$ and the air qualify of coastal urban area consierably counts on ships. Also the dispersion pattern of the all pollutants followed local circulation system in this region. Therefore this study has been developed air quality model which can describe the formation, transport, transformation and deposition processes of air pollutants considering shipping source. Currently, restriction for emission amount of ships does not exist, so our study will be useful to set the omission standard and for devising air quality policy in coastal urban region.

• International Journal of Concrete Structures and Materials
• /
• 제11권2호
• /
• pp.285-300
• /
• 2017

This study investigates the seismic performance of a staggered wall structure designed with conventional strength based design, and compares it with the performance of the structure designed by capacity design procedure which ensures strong column-weak beam concept. Then the seismic reinforcement schemes such as addition of interior columns or insertion of rotational friction dampers at the ends of connecting beams are validated by comparing their seismic performances with those of the standard model structure. Fragility analysis shows that the probability to reach the dynamic instability is highest in the strength designed structure and is lowest in the structure with friction dampers. It is also observed that, at least for the specific model structures considered in this study, R factor of 5.0 can be used in the seismic design of staggered wall structures with proposed retrofit schemes, while R factor of 3.0 may be reasonable for standard staggered wall structures.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2253-2260
• /
• 2009

BACnet is an international standard communication protocol especially designed for building automation and control systems. In this paper, a reference model of network management system for BACnet is proposed and its implementation method is introduced. In order to evaluate the feasibility and validity of proposed network management system, it is applied to a real experimental model of BACnet network system. Proposed network management system complies with standard BACnet protocol and its functions are implemented in software without hardware dependencies so that it can be applied not only to newly installed BACnet system but also to already installed BACnet system by software upgrade. The network management system and its implementation method introduced in this paper will help BACnet-based automation system to be managed efficiently and they can be practically applied in real BACnet-based automation systems.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.1187-1192
• /
• 2005

Approximately 25% of military establishments became superannuated to unable perform their function, and it influences on the environment by construction wastes and the waste of national budget, as there is no rational and objective standard even though old facilities have been replaced through modernization project. Therefore, it has been searched to introduce industrial building system that can cope with the new building-construction and transference for the improvement of existing military establishments. However, as there is no economical estimation standard for practical use, industrial building-construction is still remaining at the initial stage, and the study is insufficient too. So. in this study, I would like to develope LCC cost model for rational LCC comparative analysis between industrial construction system (Modular) and existing reinforced concrete structure and cage, and to evaluate economical efficiency through case analysis.

• International Journal of Control, Automation, and Systems
• /
• 제6권1호
• /
• pp.24-34
• /
• 2008

A novel neural network model, termed the standard neural network model (SNNM), similar to the nominal model in linear robust control theory, is suggested to facilitate the synthesis of controllers for delayed (or non-delayed) nonlinear systems composed of neural networks. The model is composed of a linear dynamic system and a bounded static delayed (or non-delayed) nonlinear operator. Based on the global asymptotic stability analysis of SNNMs, Static state-feedback controller and dynamic output feedback controller are designed for the SNNMs to stabilize the closed-loop systems, respectively. The control design equations are shown to be a set of linear matrix inequalities (LMIs) which can be easily solved by various convex optimization algorithms to determine the control signals. Most neural-network-based nonlinear systems with time delays or without time delays can be transformed into the SNNMs for controller synthesis in a unified way. Two application examples are given where the SNNMs are employed to synthesize the feedback stabilizing controllers for an SISO nonlinear system modeled by the neural network, and for a chaotic neural network, respectively. Through these examples, it is demonstrated that the SNNM not only makes controller synthesis of neural-network-based systems much easier, but also provides a new approach to the synthesis of the controllers for the other type of nonlinear systems.

• Journal of Ship and Ocean Technology
• /
• 제9권3호
• /
• pp.23-32
• /
• 2005

Ship STEP(Standard for the Exchange of Product Model Data) which is composed of AP 215 (Ship Arrangement), AP 216(Ship Hull Form), AP 218 (Ship Structure), has been developed more than last 10 years and it is now at the stage just before IS(International Standard). It is expected that ship STEP would be used for the seamless data exchange among various CAD/CAM/CAE systems of shipbuilding process. In this paper the huge and complicated data structure of ship STEP is briefly reviewed at the level of ARM(Application Reference Model) and some abstract test cases which will be included as part of the standards are introduced. Basically ship STEP has common data model to be used without losing compatibility among those three different ship AP's, and it is defined as the modeling framework. Typical cases of data exchange during shipbuilding process, such as hull form data exchange between design office and model basin, midship structure data between shipbuilding yard and classification society are reviewed and STEP physical data are generated using commercial geometric modeling kernel. Test cases of ship arrangement at initial design stage and hydrodynamic data of crude oil carrier are also included.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4296-4309
• /
• 2022

Mesh and turbulence model sensitivity analyses have been performed on computational fluid dynamics simulations executed with Hydra and ANSYS Fluent for a single CANadian Deuterium Uranium (CANDU) 37M nuclear fuel bundle placed within a standard pressure tube. The goal of this work was to perform a methodical analysis to objectively determine an appropriate mesh and to gauge the sensitivity of different turbulence models for CANDU subchannel flow under isothermal conditions. The boundary conditions and material properties are representative of normal operating conditions in a high-powered channel of the Darlington Nuclear Generating Station. Four meshes were generated with ANSYS Workbench Meshing, ranging from 22 to 84 million cells, and analyzed here to determine an appropriate level of mesh resolution and quality. Five turbulence models were compared in the turbulence model sensitivity analysis: standard k - ε, RNG k - ε, realizable k - ε, SST k - ω, and the Reynolds Stress Model. The intent of this work was to gain confidence in mesh generation and turbulence model selection of a single bundle to inform the decision making of subsequent investigations of an entire fuel channel containing a string of twelve bundles.