• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1510-1510
• /
• 2001

NIRS uses reflectance signals resulting from bending and stretching vibrations in chemical bonds between carbon, nitrogen, hydrogen, sulfur and oxygen. These reflectance signals are used to measure the concentration of major chemical composition and other descriptors of homogenized and freeze-dried whole broiler carcasses. Six strains of chicken were analyzed and the NIRS model predictions compared to reference data. The results of this comparison indicate that NIRS is a rapid tool for predicting dry matter (DM), fat, crude protein (CP) and ash content in the broiler carcass. Males and females of six commercial strain crosses of broiler chicken (Gallus domesticus) were used in this study (6$\times$2 factorial design). Each strain was grown to 16 weeks of age, and duplicate serial samples were taken for body composition analysis. Each whole carcass was pressure-cooked, homogenized, and a representative sample was freeze-dried. Body composition determined as follows: DM by oven dried method at 105$^{\circ}C$ for 3 hours, fat by Mojonnier diethyl ether extraction, CP by measuring nitrogen content using an auto-analyzer with Kjeldhal digest and ash by combustion in a muffle furnace for 24 hour at 55$0^{\circ}C$. These homogenized and freeze-dried carcass samples were then scanned with a Foss NIR Systems 6500 visible-NIR spectrophotometer (400-2500nm) (Foss NIR Systems, Silver Spring, MD., US) using Infra-Soft-International, ISI, WinISl software (ISI, Port Matilda, US). The NIRS spectra were analyzed using principal component (PC) analysis. This data was corrected for scatter using standard normal “Variate” and “Detrend” technique. The accuracy of the NIRS calibration equations developed using Partial Least Squares (PLS) for predicting major chemical composition and carcass descriptors- such as body mass (BM), bird dry matter and moisture content was tested using cross validation. Discrimination analysis was also used for sex and strain identification. According to Dr John Shenk, the creator of the ISI software, the calibration equations with the correlation coefficient, $R^2$, between reference data and NIRS predicted results of above 0.90 is excellent and between 0.70 to 0.89 is a good quantifying guideline. The excellent calibration equations for DM ($R^2$= 0.99), fat (0.98) and CP (0.92) and a good quantifying guideline equation for ash (0.80) were developed in this study. The results of cross validation statistics for carcass descriptors, body composition using reference methods, inter-correlation between carcass descriptors and NIRS calibration, and the results of discrimination analysis for sex and strain identification will also be presented in the poster. The NIRS predicted daily gain and calculated daily gain from this experiment, and true daily gain (using data from another experiment with closely related broiler chicken from each of the six strains) will also be discussed in the paper.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.4
• /
• pp.385-396
• /
• 2006

The International GNSS Service (IGS) has prepared for a transition from the relative phase conte. variation (PCV) to the absolute PCV, because the terrestrial scale problem of the absolute PCV was resolved by estimating the PCV of the GPS satellites. Thus, the GPS data will be processed by using the absolute PCV which will be an IGS standard model in the near future. It is necessary to compare and analyze the results between the relative PCV and the absolute PCV for the establishment of the reliable processing strategy. This research analyzes the effect caused by the absolute PCV via the GPS network data processing. First, the four IGS stations, Daejeon, Suwon, Beijing and Wuhan, are selected to make longer baselines than 1000km, and processed by using the relative PCV and the absolute PCV to examine the effect of the antenna raydome. Beijing and Wuhan stations of which the length of baselines are longer than 1000km show the average difference of 1.33cm in the vertical component, and 2.97cm when the antenna raydomes are considered. Second, the 7 permanent GPS stations among the total 9 stations, operated by Korea Astronomy and Space Science Institute, are processed by applying the relative PCV and the absolute PCV, and their results are compared and analyzed. An insignificant effect of the absolute PCV is shown in Korea regional network with the average difference of 0.12cm in the vertical component.

• Korean Security Journal
• /
• no.13
• /
• pp.1-21
• /
• 2007

This study aims to analysis and measure on the curriculum of security programs in Korean university as the private security system. Civil security demand social safety life by the police protection and private security system. The private security or the civil guards shows rapid growth by the social development and improve the quality of life. But the supply and training system have some limitations in spite of the high demand guard-secretary. The main role of secretaries has been to accompany superiors in order to maintain their dignity or trait. Then the secretaries are required to play additional roles of safety managers such as a security manager, a protocol manager, an intelligence manager and a protective driver in order to overcome the domestic and the international safety environment and to elevate the quality of service as a competitive work. So, the purpose of this article is to analyze current situation of civil body and security guard training industry and to seek an educational model. For that, we examine in 'Do the professional training organizations meet social demand for the body and security guards'? And, 'What kind of training has to be provide for the body and security guards'? and 'What the qualifications of the trainers'? Then, 'What are the differences in training courses between private organizations and universities'? 'Is there differences in the job placement among the trainers of private organizations and universities'? etc.. Conclusion, the social demand common curriculum for the body and security guard will be drawn from the analysis of diverse training organizations with different training courses in contents, training periods, educational value, and social aim. Then we have to a standard curriculum for the successful training education system to provide social security.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.3
• /
• pp.329-338
• /
• 2016

As the need of indoor spatial information has grown, many applications have been developed. Nevertheless, the major representations of indoor spatial information are on the 2D or 3D, recently, the service based on omni-directional image has increased. Current service based on omni-directional image is used just for viewer. To provide various applications which can serve the identifying the attribute of indoor space, query based services and so on, topological data which can define the spatial relationships between spaces is required. For developing diverse applications based on omni-directional image, this study proposes the method to generate IndoorGML data which is the international standard of indoor topological data model. The proposed method is consist of 3 step to generate IndoorGML data; 1) Analysis the core elements to adopt IndoorGML concept to image, 2) Propose the method to identify the element of ‘Space’ which is the core element of IndoorGML concept, 3) Define the connectivity of indoor spaces. The proposed method is implemented at the 6-floor of 21centurybuilding of the University of Seoul to generate IndoorGML data and the demo service is implemented based on the generated data. This study has the significance to propose a method to generate the indoor topological data for the indoor spatial information services based on the IndoorGML.

• Journal of the Korean Society for information Management
• /
• v.26 no.2
• /
• pp.83-103
• /
• 2009

The Computer Interchange of Museum Information (CIMI), operating from 1990-2003, was charged with creating and introducing the international museum community to the concept of adopting metadata industry standards. The CIMI consortium exceeded its original mission by; creating a standards framework, profile, testbeds, important metadata publications, free downloadable metadata software and protocols, and providing instrumental guidance and support in development of new projects. However, CIMI's emphasis on the importance and utility of a standards-based approach and the necessity for implementing the CIMI Standards Framework is probably its most important achievement. During CIMI's tenure, museums reaped the benefits by learning how to apply the model and standards to meet their individual needs while not having to invent new ones or bear the cost of software development. Although CIMI operations ceased in 2003, its impacts on museum related metadata application and research were unprecedented in that it provided the standards prototype and foundations on which to build. This paper discusses what CIMI bequeathed to the next generation of museum metadata field developers and describes the anticipated realm of future projects and advancement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.5
• /
• pp.382-390
• /
• 2017

In this paper, we consider particular exposure scenarios to evaluate human effects for inductive commercial wireless charging device operating at low frequency. The coil used in this study is the A10 model in Qi standard proposed by WPC(Wireless Power Consortium), and input power is 5 W to the operating frequency of 155 kHz. In perfectly aligned condition, the max leakage magnetic field is $257.58{\mu}T$ which is obtained at the side of the device, and it is exceeded about 7.4 times of the ICNIRP 1998 reference level. The SAR is evaluated with homogeneous phantom which has electric constants of wet skin. The max value of the SAR is $134.47{\mu}W/kg$ which is obtained at the side of the device also, and it is much lower than the international guidelines. Especially, it showed higher SAR values in case of misalignment condition, so we will need to consider the misalignment condition importantly when we evaluate human effects for wireless power transfer system.

• Journal of Environmental Science International
• /
• v.14 no.2
• /
• pp.221-230
• /
• 2005

Catalytic wet oxidation of trichloroethylene (TCE) in water has been conducted using $TiO_2-supported$ cobalt oxides at $36^{\circ}C$ with a weight hourly space velocity of $7,500\;h^{-1}.\;5\%\;CoO_x/TiO_2$, prepared by using an incipient wetness technique, might be the most promising catalyst for the wet oxidation although it exhibited a transient behavior in time on-stream activity. Not only could the bare support be inactive for the wet decomposition reaction, but no TCE removal also occurred by the process of adsorption on $TiO_2$ surface. The catalytic activity was independent of all particle sizes used, thereby representing no mass transfer limitation in intraparticle diffusion. XPS spectra of both fresh and used Co surfaces gave different surface spectral features for each $CoO_x,\;Co\;2P_{3/2}$ binding energy for Co species in the fresh catalyst appeared at 781.3 eV, which is very similar to the chemical states of $CoTiO_x$ such as $CO_2TiO_4\;and\;CoTiO_3$. The used catalyst exhibited a 780.3-eV main peak with a satellite structure at 795.8 eV. Based on XPS spectra of reference Co compound, the TCE-exposed Co surfaces could be assigned to be in the form of mainly $Co_3O_4$. XRD patterns for $5\%\;CoO_x/TiO_2$ catalyst indicated that the phase structure of Co species in the catalyst even before reaction is quite comparable to the diffraction lines of external $Co_3O_4$ standard. A model structure of $CoO_x$ present predominantly on titania surfaces would be $Co_3O_4$, encapsulated in thin-film $CoTiO_x$ species consisting of $Co_2TiO_4$ and $CoTiO_3$, which may be active for the decomposition of TCE in a flow of water.

• Journal of Distribution Science
• /
• v.13 no.10
• /
• pp.109-114
• /
• 2015

Purpose - The movie market has the characteristics of being a perfectly competitive market as well as a pure monopolistic market at the same time. This is because there are competitors in the industry but prices, although not fixed, have not changed a lot. Price competition may not have spread, but the competition is focused on artistic value, and the degree of box office success is most important. The artistic value is determined in the course of the production process. However, the degree of box office success is dependent upon the marketing manager. The marketing strategy represents the difference in the standard or quality of the movie. Inherently, the marketing manager adopts the entertainment strategy based on the quality of the foundation of the completed movie. At this time, the marketing manager knows the pertinent information (high quality/low quality) regarding the movie. This research study tries to reveal what should be the reasonable movie marketing expense, dependent on the quality of the movie. Research design, data, and methodology - Using a game scenario with different market players, the goal of the research analysis is to find out the following. First, the marketing expense is determined to maximize the profits after film production. Second, after the production costs are already committed, the manufacturer gets to choose the marketing level. At this time, there will be a profit maximization point, considering the competition. The premise of the research is as follows: if it is a good movie of quality, positive word of mouth increasing the audience continuously slows down the speed of the demand curve. If the movie quality is bad, the negative word of mouth decreasing the audience gradually hastens the speed of the demand curve. On the marketing side, when the manufacturer invests heavily in the marketing expense of the movie, consumer expectations increase to drive up the audience numbers. On the other hand, it is difficult to improve the profits excessively. When the manufacturer invests in marketing a little bit, the marketing expense is only relatively committed, therefore a lot of demand cannot be gained. Results - If a fixed market share is in a competitive situation, a low quality manufacturer expends relatively more marketing expense. If the situation assumes two manufacturers spend the same for the cost of production, the high quality manufacturer takes more profit. If the manufacturer expends less marketing budget to save costs, the optimum profit cannot be achieved since the other party (opponent) grabs the initial market share. Conclusions - In conclusion, investment is essential for market share to increase. We must refrain from a zero-sum game and have models where the game participants pursue the creative profits together. In the current film industry, there is the dominating logic of winner and loser but we have to create a film industry environment where the participants can be altogether satisfied and live together.

• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.87-95
• /
• 2018

PURPOSES : A geo-grid pavement, e.g., a stress-absorbing membrane interlayer (SAMI), can be applied to an asphalt-overlay method on the existing surface-pavement layer for pavement maintenance related to reflection cracking. Reflection cracking can occur when a crack in the existing surface layer influences the overlay pavement. It can reduce the pavement life cycle and adversely affect traffic safety. Moreover, a failed overlay can reduce the economic value. In this regard, the objective of this study is to evaluate the bonding properties between the rigid pavement and a SAMI by using the direct shear test and the pull-off test. The predicted fractural energy functions with the shear stress were determined from a numerical analysis of the moving average method and the polynomial regression method. METHODS : In this research, the shear and pull-off tests were performed to evaluate the properties of mixtures constructed using no interlayer, a tack-coat, and SAMI with fabric and without fabric. The lower mixture parts (describing the existing pavement) were mixed using the 25-40-8 joint cement-concrete standard. The overlay layer was constructed especially using polymer-modified stone mastic asphalt (SMA) pavement. It was composed of an SMA aggregate gradation and applied as the modified agent. The sixth polynomial regression equation and the general moving average method were utilized to estimate the interlayer shear strength. These numerical analysis methods were also used to determine the predictive models for estimating the fracture energy. RESULTS : From the direct shear test and the pull-off test results, the mixture bonded using the tack-coat (applied as the interlayer between the overlay layer and the jointed cement concrete) had the strongest shear resistance and bonding strength. In contrast, the SAMI pavement without fiber has a strong need for fractural energy at failure. CONCLUSIONS : The effects of site-reflection cracking can be determined using the same tests on cored specimens. Further, an empirical-mechanical finite-element method (FEM) must be done to understand the appropriate SAMI application. In this regard, the FEM application analy pavement-design analysis using thesis and bonding property tests using cored specimens from public roads will be conducted in further research.

• Spatial Information Research
• /
• v.21 no.6
• /
• pp.23-32
• /
• 2013

Recently, there has been much interest in the converged platform that enables the harmonized collection, integration, exchange, presentation and analysis of various kinds of marine information by using the ICT means. Regarding such the converged platform, S-100 standards including the international hydrographic data model are being announced and various studies have been published based on the S-100 standards. However, the existing studies have presented simple solutions for only given problems on the converged service of the maritime information. They could not propose the design concept of the converged platform which makes it possible to provide the standardized and integrated services among the geospatial data, the real-time maritime data, and the next ENC. Therefore, we propose design and implementation details of the converged service platform for the geospatial and the maritime data based on the S-100, WMS, WMTS, WPS, SOS standards. The proposed platform has advantages of supporting both the S-57 and the S-101, supporting the converged services of heterogeneous geospatial data and ENC data, supporting the real-time services of sensor data such as weather, AIS, and CCTV, and supporting the development of various kinds of maritime systems such as ECDIS, ECS, VTS based on the WebApp service. Finally, we proved the effectiveness of our proposed platform through the actual implementation of the converged service of geospatial data, S-101 data, and KWeather data.