• Wind and Structures
• /
• v.30 no.3
• /
• pp.219-229
• /
• 2020

Net pressures on roofs and walls of buildings are dependent on the internal and external pressure fluctuations. The variation of internal and external pressures are influenced by the size and location of the openings. The correlation of external and internal pressure influences the net pressures acting on cladding on different parts of the roof and walls. The peak internal and peak external pressures do not occur simultaneously, therefore, a reduction can be applied to the peak internal and external pressures to obtain a peak net pressure for cladding design. A 1:200 scale wind tunnel model study was conducted to determine the correlations of external and internal pressures and effective reduction to net pressures (i.e., net pressure factors, F_C) for roof and wall cladding. The results show that external and internal pressures on the windward roof and wall edges are well correlated. The largest ${\mathcal{C}}_{{\check{p},net}$, highest correlation coefficient and the highest F_C are obtained for different wind directions within 90° ≤ θ ≤ 135°, where the large openings are on the windward wall. The study also gives net pressure factors F_C for areas on the roof and wall cladding for nominally sealed buildings and the buildings with a large windward wall opening. These factors indicate that a 5% to 10% reduction to the action combination factor, K_C specified in AS/NZS 1170.2(2011) is possible for some critical design scenarios.

• Journal of Korean Foot and Ankle Society
• /
• v.10 no.2
• /
• pp.190-195
• /
• 2006

Purpose: To evaluate the results of open reduction and internal fixation for displaced talar neck fracture. Materials and Methods: Fourteen patients were followed for more than 1 year after open reduction and internal fixation of displaced talar neck fracture. The mean age was 41.5 years, and the mean follow-up period was 3.8 years. There were 10 type II, 3 type III and 1 type IV fractures per Hawkins. There were 3 open fractures. Clinically AOFAS ankle-hindfoot scale and Hawkins criteria were utilized. Radiologically quality of reduction, duration of bony union, avascular necrosis and posttraumatic arthritis were evaluated. Results: At last follow-up, AOFAS scale was mean 89.1 points. There were 8 excellent, 4 good, and 2 fair results according to Hawkins criteria. Radiologically anatomical reduction was obtained in 13 cases. Mean duration of bony union was 11.8 weeks. There were 3 avascular necrosis and 2 post-traumatic arthritis. There was no significant difference in the incidence of avascular necrosis between early operation group and surgically delayed group. Conclusion: Accurate open reduction and rigid internal fixation seem to be prerequisites for satisfactory treatment of a displaced talar neck fracture.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.1
• /
• pp.205-213
• /
• 1998

This study was designed to reveal the correlationship between the internal derangement state of TMJ and clinical characteristics including pain and mandibular dysfunction. One hundred and twenty five subjects with TMJ signs and symptoms were chosen for two years. The level of pain and madibular dysfunction were evaluated by Visual Analog Scale(VAS) and Craniomandibular Index(CMI). The diagnostic categories of TMJ internal derangement were determined by arthrography and they included normal disc position, anterior disc displacement with reduction(ADDR), rotational disc displacement with reduction (RDDR), anterior disc displacement without reduction(ADDNR), and rotational disc displacement without reduction(RDDNR). Also disc perforation was used as a criteria to divide the diagnostic subgroups. The obtained results were as follows; 1. The patient distribution of each group was 5 in normal disc position(4％), 40 in ADDR(32％), 30 in RDDR(24％), 34 in ADDNR(27％), and 16 in RDDNR(13％). 2. Perforation was observed in 8％ of ADDR, 10％ of RDDR, 32％ of ADDNR, and 19％ of RDDNR. 3. CMI of non-reduction group was higher than that of reduction or normal group(p<0.05), but V AS showed no significant difference.4. CMI of perforation group was higher than that of non-perforation group in reduction group (p<0.05). 5. There were no significant differences of CMI and VAS between anterior disc displacement group and rotational disc displacement group in both reduction and non-reduction group. 6. CMI of RDDNR group was higher than that of RDDR group(p<0.05). 7. There were no significant difference of CMI and VAS between bilateral involvement group and unilateral involvement group(p<0.05).

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.4
• /
• pp.123-132
• /
• 2010

Rebar work accounts for approximately 30% of the total construction costs for rebars and concrete. Recently, the high rising prices of rebars have become one of the principle factors of rising construction costs. Therefore, construction companies are putting much effort into loss reduction of rebars. Consequently, in this study, we wished to present loss reduction methods of rebars before the preparation of the placing drawings. To devise such methods, we collected previous case studies and analyzed methods that were applied for loss reduction. As a result of the analysis, we were able to find the following methods for loss reduction of rebars: method of reducing the number of splices at the mat foundation, method of reducing splice length at the internal columns or walls of the underground parking lot, method of reducing cap-ties of internal beams of basement floors excluding perimeter beams, and method of reducing anchorage length at the internal column or wall of the underground parking lot. Based on those analysis results, we presented our own loss reduction methods of rebars. Applying our methods resulted in considerable loss reduction.

• Clinics in Shoulder and Elbow
• /
• v.18 no.2
• /
• pp.75-79
• /
• 2015

Background: This retrospective comparative study aims to evaluate the surgical outcomes and complications of two surgical methods for simple fractures of the humeral shaft; minimally invasive anterior plating and open reduction combined with internal fixation. Methods: A total of 26 patients with humeral shaft simple fractures, who had surgery between June 2009 and September 2013 and were followed-up at least 12 months, were included in our analysis. They were divided into two groups; group 1 comprised of 12 patients who underwent minimally invasive anterior plating and group 2 comprised of 14 patients who underwent an open reduction and internal fixation. The clinical outcomes, radiological results, and complications were compared and analyzed. Results: We found that bone union was achieved in all patients, and the mean union periods were $20.7{\pm}3.34$ and $20.3{\pm}3.91$ weeks for groups 1 and 2, respectively. In most patients, we found that shoulder and elbow functions were recovered. At 12 months post-operation, we found that the Korean Shoulder Scoring system, the University of California at Los Angeles score and Mayo elbow performance score were $91.4{\pm}7.97$, $33.4{\pm}1.15$, and $90.8{\pm}2.23$ for group 1, and $95.2{\pm}1.53$, $33.3{\pm}1.43$, and $90.17{\pm}1.85$ for group 2. In terms of complications, we found that 2 patients had radial nerve palsy after open reduction and internal fixation, but all cases spontaneously resolved within 6 months. Complications such as infection and loss of fixation were not reported. Conclusions: Both minimally invasive anterior plating and open reduction with internal fixation produced satisfactory outcomes in the treatment of simple fractures of the humeral shaft.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.48 no.2
• /
• pp.122-124
• /
• 2022

Various techniques are well documented to obtain anatomic reduction, such as reduction forceps, manual reduction, or a combination of these methods. However, these techniques have inherent drawbacks. We propose a new intra-operative technique for anatomic reduction using screw-wire traction for open reduction and internal fixation of mandibular fractures.

• Wind and Structures
• /
• v.28 no.1
• /
• pp.1-17
• /
• 2019

Internal ring beams are primary components of new ring-stiffened cooling towers. In this study, numerical simulation of the internal flow field of a cooling tower with three ring beams under wind-thermal coupling effect is performed. The studied cooling tower is a 220-m super-large hyperbolic indirect natural draft cooling tower that is under construction in China and will be the World's highest cooling tower, the influence of peripheral radiators in operating cooling tower is also considered. Based on the simulation, the three-dimensional effect and distribution pattern of the wind loads on inner surface of the cooling tower is summarized, the average wind pressure distributions on the inner surface before and after the addition of the ring beams are analyzed, and the influence pattern of ring beams on the internal pressure coefficient value is derived. The action mechanisms behind the air flows inside the tower are compared. In addition, the effects of internal ring beams on temperature field characteristics, turbulence kinetic energy distribution, and wind resistance are analyzed. Finally, the internal pressure coefficients are suggested for ring-stiffened cooling towers under wind-thermal coupling effect. The study shows that the influence of internal stiffening ring beams on the internal pressure and flow of cooling towers should not be ignored, and the wind-thermal coupling effect should also be considered in the numerical simulation of cooling tower flow fields. The primary conclusions presented in this paper offer references for determining the internal suction of such ring-stiffened cooling towers.

• Journal of the Korean Arthroscopy Society
• /
• v.2 no.1
• /
• pp.93-96
• /
• 1998

We treated 10 cases of the medial malleolar fracture of the ankle by open reduction and internal fixation from June 1997 to December 1997. After the rigid internal fixation, we measured the gap of the fracture site and the step off of the articular surface by special instrument under the ankle arthroscopy whether it was reduced anatomically or not. And we tried to know the necessity of the arthroscopically assisted reduction and fixation in the medial malleolar fracture of the ankle. Under the arthroscopic view, all 10 cases were anatomically reduced as less than 1 mm of gap of the fracture site and less than 1mm of step off of the articular surface after open reduction and internal fixation in the medial malleolar fractures. In conclusion, through the arthroscopic management, it has advantage in finding and treating the accompanying intraarticular lesion, but also has disadvantage in setting the arthroscope and prolonging the operation time.

• The Journal of the Korean dental association
• /
• v.58 no.6
• /
• pp.364-376
• /
• 2020

Internal derangement of the temporomandibular joint (TMJ) is condition in which articular disc has become displaced from its normal functional relationship with the mandibular condyle and the articular portion of the temporal bone. Common types of internal derangement include disc displacement with reduction (with or without intermittent locking), and disc displacement without reduction (with or without limited opening) classified according to the Diagnostic Criteria for Temporomandibular Disorders (DC/TMD). Treatment varies depending on diagnosis. Therefore, differential diagnosis should be made for appropriate treatment.

• Archives of Craniofacial Surgery
• /
• v.10 no.1
• /
• pp.33-36
• /
• 2009

Purpose: Fractures of the mandibular condylar area are common injuries that account for 29% to 40% of fractures of the facial bones and represent 20% to 62% of all mandibular fractures. Currently 3 main methods are being used in the treatment of mandibular subcondylar fractures: closed reduction; open reduction and internal fixation; Endoscopic reduction and internal fixation. Each method has its proponents and opponent as well as advantages and disadvantages, and indications for each vary among surgeons. There are six approaches of open reduction: submandibular, retromandibular, preaurilcular, postauricular, intraoral, transparotid approach. Among them, transparotid approach has been described for subcondylar exposure with dissection in the direction of facial nerve fibers to expose the bone through the parotid gland. This approach carries the risk of a parotid glandular fistula as well as facial nerve injury but has the advantage of being directly over the fracture site. We report safety and efficacy of surgical treatment using a transparotid approach for direct plating. Methods: A 43-year-old man sustained multiple facial bone fractures by driver traffic accident. Mandibular subcondyle was fractured and dislocated internally. We performed open reduction and internal fixation by transparotid approach. Fractured site was fixed by titanium mini plate & screw. We applicated arch bar for approximately 3 weeks. Results: Follow-up length was about 5months. Scar of surgical incision was indistinct, there was no symptoms and signs of facial nerve and parotid gland injury, and maximal mouth opening was measured 49.5 mm. Conclusion: Transparotid approach has high risks of facial nerve and parotid gland injury, but paradoxically it is the most effective technique in saving facial nerve. Open reduction and internal fixation of mandibular subcondylar fracture by transparotid approach with precise and versed procedure, best outcome can be expected.