• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.370-376
• /
• 2005

Magnesium alloys are becoming important material for light weight car body, due to their low specific density but high specific strength. However they have a poor weldability, caused high oxidization tendency and low vapor temperature. In this study, the welding performance of magnesium alloys was investigated for automobile application. The materials were rolled magnesium alloy sheet contains Al and Zn such as AZ3l , AZ6l and AZ9l. Three types of welding process were studied, that were GTAW, Laser beam welding and FSW. To evaluate the weldability, we examined the appearance of welding bead. Also we checked bead shape and internal defects such as crack and porosity on cross section of welding bead. The mechanical property was measured for welded specimen by tensile test. For determination of the strength change by welding process, the hardness profile across the welding center was measured. For the results, the tensile properties of welded specimen were decreased obviously on all welding process. For the fusion welding process such as GTAW and laser beam welding, the surface of the welding bead was covered with oxidized magnesium dust but it was removed by simple cleaning work as wipe-out with tissue. Also under cut, that caused vaporization of base metal was occurred. for the friction stir welding, there was no oxidation, under-cut or internal defects. However it had poor weld performance, the reason was cleavage fracture occurred at plastic deformation zone. For welding of magnesium alloy, the laser beam welding process was recommended.

• 대한의생명과학회지
• /
• 제17권1호
• /
• pp.79-84
• /
• 2011

Photodynamic therapy consists of a photosensitizer, suitable light source and oxygen. The excitation of the photosensitizer at a cancer mass results in oxidation which would ultimately reduce the mass via apoptosis. Millimeter wave (MMW) therapy has also been known to be effective on cancer cell mass reduction, human cell regeneration and immunity enhancement among the Russian clinicians and scientists. In the present study, the two modalities were combined to achieve synergistic effects while reducing the administration dosage of the photosensitizer, photogem, thus minimizing the side effects. The CT-26 adenocarcinoma cell mass was implanted on mice and the tumors were exposed to a simple MMW irradiation or a combined treatment of MMW and PDT. The treatments continued for 4 weeks and the size of the tumor was measured continuously. The significant therapeutic result of MMW was not found during 4 weeks, preferably more cancer recurrence possibility after MMW irradiation was observed. The results of this study suggest that the combination of MMW irradiation and photodynamic treatment should not be recommended. The result of the MMW treatment alone, however, displayed suppressive effect on cancer cell proliferation for both in vitro and in vivo. The results of the present study suggest that the millimeter wave therapy deserves a further study.

• 한국재료학회지
• /
• 제17권5호
• /
• pp.268-272
• /
• 2007

Inconel 617 is a candidate tube material for high temperature gas-cooled reactors(HTGR). The microstructure and mechanical properties of Inconel 617 were studied after exposure at high temperature($1050^{\circ}C$). The dominant oxide layer was Cr-oxide. The internal oxide and Cr-depleted region were observed below the Cr-oxide layer. The depth of Cr-depleted zone and internal oxide increased with exposure time. The major phases of carbides are $M_{23}C_6\;and\;M_6C$. The composition of $M_{23}C_6\;and\;M_6C$ were determined to be Cr-rich and Mo-rich, respectively. $M_6C$ carbide is more stable than $M_{23}C_6$ at high temperature. From the results of high temperature compression test, there were no significant changes in hardness and yield strength upon increasing exposure time.

• Tuberculosis and Respiratory Diseases
• /
• 제73권1호
• /
• pp.22-31
• /
• 2012

Background: Oxidation plays an important role in acute lung injury. This study was conducted in order to elucidate the effect of repetitive post-treatment of N-acetylcysteine (NAC) in lipopolysaccaride (LPS)-induced acute lung injury (ALI) of rats. Methods: Six-week-old male Sprague-Dawley rats were divided into 4 groups. LPS (Escherichia coli 5 mg/kg) was administered intravenously via the tail vein. NAC (20 mg/kg) was injected intraperitoneally 3, 6, and 12 hours after LPS injection. Broncho-alveolar lavage fluid (BALF) and lung tissues were obtained to evaluate the ALI at 24 hours after LPS injection. The concentration of tumor necrosis factor ${\alpha}$ (TNF-${\alpha}$) and interleukin $1{\beta}$ (IL-$1{\beta}$) were measured in BALF. Nuclear factor ${\kappa}B$ (NF-${\kappa}B$), lipid peroxidation (LPO), and myeloperoxidase (MPO) were measured using lung tissues. Micro-computed tomography (micro-CT) images were examined in each group at 72 hours apart from the main experiments in order to observe the delayed effects of NAC. Results: TNF-${\alpha}$ and IL-$1{\beta}$ concentration in BALF were not different between LPS and NAC treatment groups. The concentration of LPO in NAC treatment group was significantly lower than that of LPS group ($5.5{\pm}2.8$ nmol/mL vs. $16.5{\pm}1.6$ nmol/mL) (p=0.001). The activity of MPO in NAC treatment group was significantly lower than that of LPS group ($6.4{\pm}1.8$ unit/g vs. $11.2{\pm}6.3$ unit/g, tissue) (p<0.048). The concentration of NF-${\kappa}B$ in NAC treatment group was significantly lower than that of LPS group ($0.3{\pm}0.1\;ng/{\mu}L$ vs. $0.4{\pm}0.2\;ng/{\mu}L$) (p=0.0001). Micro-CT showed less extent of lung injury in NAC treatment than LPS group. Conclusion: After induction of ALI with lipopolysaccharide, the therapeutic administration of NAC partially attenuated the extent of ALI through the inhibition of NF-${\kappa}B$ activation.

• Journal of Animal Science and Technology
• /
• 제46권3호
• /
• pp.397-404
• /
• 2004

가열방법과 포장방법이 저장기간 동안 칠면조육 패티의 지방산화(TBARS)와 콜레스테롤 산화물 함량에 미치는 효과를 조사하기 위하여, 칠면조 다리육을 분쇄하여 패티를 제조하였다. 칠면조육 패티는 5가지 가열방법(oven cooking, pan frying, deep frying, boiling, microwaving)으로 가열한 후 각각 함기포장과 진공포장한 후 저장하면서 시험에 공시하였다. 지방산패도는 함기포장과 진공포장 모두 저장초기에는 boiling 방법이 유의적으로(P < 0.05) 높게 나타났으나, 저장 말기에는 microwaving 방법이 가장 높은 지방산패도를 나타내었다(P < 0.05). 총 콜레스테롤 산화물의 량은 전 저장기간동안 boiling 방법이 가장 낮은 함량을 나타내었고(P < 0.05), microwaving 방법이 가장 높은 함량을 나타내었다(P < 0.05).각각의 콜레스테롤 산화물의 함량을 보면,7$\alpha$-hydroxycholesterol은 pan frying 방법이 가장 낮은 함량을 나타내었고(P < 0.05), microwaving 방법이 가장 높은 함량을 나타내었다(P < 0.05). $\lpha$-epoxide의 량은 boiling 방법이 가장 낮은 함량을 나타내었으며, pan frying 방법에서 가장 높게 나타났다(P < 0.05). $\beta$-epoxide 함량은 pan frying 방법이 가장 낮은 함량을 나타내었으며(P < 0.05), deep frying 방법과 microwaving 방법에서 가장 높은 함량을 나타내었다(P < 0.05). 또한 7-ketocholesterol의 함량은 microwaving 방법에서 가장 높게 나타났다(P < 0.05).

• 분석과학
• /
• 제5권1호
• /
• pp.143-152
• /
• 1992

본 연구는 니켈기 초내열 합금 KM 1557의 내식성 및 고온 산화 성질을 조사하기 위하여 황산, 염산, 질산, 인산 및 초산에서의 부식시험과 $900^{\circ}C$, $950^{\circ}C$, $1050^{\circ}C$에서의 고온산화시험, 그리고 $900^{\circ}C$에서 75% $Na_2SO_4-25%$ NaCl 염욕에서 고온황화 침지시험을 실시하였다. 각 시험 후 시편의 단면을 광학현미경으로 관찰하였으며, EPMA 및 X-ray mapping으로 분석하여 시편의 조성분포를 조사하였다. 각종 산에서의 내식성 및 염욕에서의 고온 내식성은 우수하였으며 고온산화시험 결과 산화물의 양은 내부 및 입계간 산화물인 $Al_2O_3$층의 깊이에 주로 영향을 받는 것으로 나타났다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.91-91
• /
• 2011

This paper describes development procedure of the four types of fuel cell's blowers: pressurized fuel blower, selective oxidation air blower, cathode air blower, and burner air blower. Diaphragm blowers having two heads are selected to maintain force balance when the rotating arms are moving by the driving motor. Dimensions of a diaphragm cavity is designed according to the optimal design procedure using numerical simulation and experimental measurement. Experimental apparatus is designed by considering the bower characteristics having low flow rate and high pressure. Test blower is operated by a diaphragm, which has suction and discharge port on the top of the blower. For analyzing the internal flow of the blower, three-dimensional Navier-Stokes analysis is introduced in the present study. Throughout the optimal design of the blowers, blower performance is enhanced by reducing the unbalance motion of the rotating arm and loss region in the diaphragm cavity.

• 한국분말재료학회지
• /
• 제10권5호
• /
• pp.337-343
• /
• 2003

Nanostructured Cu-$Al_2O_3$ composite powders were synthesized by thermochemical process. The synthesis procedures are 1) preparation of precursor powder by spray drying of solution made from water-soluble copper and aluminum nitrates, 2) air heat treatments to evaporate volatile components in the precursor powder and synthesis of nano-structured CuO + $Al_2O_3$, and 3) CuO reduction by hydrogen into pure Cu. The suggested procedures stimulated the formation of the gamma-$Al_2O_3$, and different alumina formation behaviors appeared with various heat treating temperatures. The mean particle size of the final Cu/$Al_2O_3$ composite powders produced was 20 nm, and the electrical conductivity and hardness in the hot-extruded bulk were competitive with Cu/$Al_2O_3$ composite by the conventional internal oxidation process.

• 대한치과기공학회지
• /
• 제32권4호
• /
• pp.297-305
• /
• 2010

Purpose: The purpose of this study was to observe the change of metal-mold reaction and surface roughness in titanium casting specimens for phosphate-silica alumina bonded investment with mold temperatures. Methods: The metal-phosphate silica alumina bonded mold interface reaction and surface roughness of titanium casting specimens according to mold temperatures were investigated. The Specimens were analysed by scanning electron microscopy and surface roughness tester. Results: The oxidation behavior indicated by the growth of oxide thickness. The titanium-oxide layer were consisted two layer of a porous external and a dense internal one. The reaction layer and surface roughness increased with increasing investment material temperature. Conclusion: In this work, The most suitable mold temperature in casting of pure titanium was $200^{\circ}C$.

• 한국표면공학회지
• /
• 제31권1호
• /
• pp.3-11
• /
• 1998

Molten Carbonate Fuel cell is a promising new type electric power generation system which can achieve high efficiency, lower matrrial cost and high operating temperature Making internal reforming possible. Although the development of the MCEC is progressing rapidly toward commercialization, two important tchological problems such as dissolution of NiO cathode and not corrosion of metallic separator plate must be resolved. Because MCFC is operated at $650^{\circ}C$ and the electrolyte is very corrosive, corrosion-resistance of separator plated against oxidation abd molten carbonate is required. Al-coating on separator material for corrosion-resistance was carried out by painting, thermal spraying. hot dipping and vacuum vapour deposition. The corrosion of Al-coated STS 316S and 316L in molten carbonate at $700^{\circ}C$was studied. Vacuum vapour deposition and thermal spraing for Al-coating on STS 310S and 316L were the most effective methods for protecting thestainless steel corrosion in molten carbonate.