• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1227-1233
• /
• 2010

In the hot section of a gas turbine, the turbine blades were protected from high temperature by providing a thermal barrier coating (TBC) as well as by cooling air flowing through internal passages within the blades. The cooling air then passed through discrete holes on the blade surface, creating a film of cooling air that further protects the surface from the hot mainstream flow. The holes are subjected to stresses resulting from the lateral growth of thermally grown oxide, the thermal expansion misfit between the constituent layers, and the centrifugal force due to high-speed revolution; these stresses often result in cracking. In this study, the deformation and cracks occurring near a hole on a heat-resistant alloy subjected to thermo-mechanical cycling were investigated. The experiment showed that cracks formed around the hole depending on the applied stress level and the number of cycles. These results could be explained by our analytic solution.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.533-539
• /
• 2013

Recently, Ionic Polymer Metal Composite (IPMC) systems receive great attention in the fields of the medical and biomedical Engineering because of several merits in terms of new actuators and sensors and fuel cell materials. When the voltage is excited to IPMC system, it moves. Conversely, if there are any movement on the IPMC, the IPMC has charge voltage by the internal properties. Therefore the IPMC can be used as a motion sensor or force sensor. In this paper, we identify characteristics of the IPMC and control its movements from remote locations by the smart-phone system based on visual information for monitoring. Additionally, control of movements of the IPMC is realized by transmit motion commands using the smart-phone system with the blue-tooth communication. Unfortunately, there are some deficiencies to perfectly attain physical properties of the IPMC systems from our experiments in this paper. However, in its utilization point of view, we demonstrate that the IPMC has some potentials as new sensors, actuators, and fuel cells.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.545-559
• /
• 2016

This study examined the work-family compatibility experience of married nurses. The participants of this research were 7 registered nurses who are on the expanding stage of their family life cycle. Data were collected by individual in-depth interviews from June 10 to November 30, 2015 and analyzed using phenomenological methodology by Colaizzi (1978). The results showed that the work-family compatibility experience of married nurses may be categorized into 4 categories, 'the reality of work and parenting', 'external and internal conflicts about the compatibility of work and parenting', 'compromise with reality for solving the difficulty of compatibility', 'growing desire and efforts for compatibility', and may be identified with 12 theme clusters and 29 themes. The worthiness as a professional woman and happiness in child rearing are the driving force of the compatibility of work and family in married nurses. Therefore, the continued support of government policies and family is important for married nurses to maintain work and family balance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.15-20
• /
• 2019

This paper evaluated the construction costs of 11 design cases to decrease the horizontal forces applied to the abutment. They include two abutment types, which are to improve backfill materials for a reversed T-shaped abutment and geosynthetic Reinforced Abutment for Railways (RAR). The first type of economic analysis was that the internal friction angles of backfill materials were increased from Φ=35° to Φ=40° and 50° for a reversed T-shaped abutment. In addition, the second type was the cases with the design of geosynthetic RAR. When friction angles of 40° or 50° were applied through the improvement of the backfill material, the decrease in construction cost of the abutment was not large (2.0~3.9%), even though the horizontal forces applied to the abutment had decreased to 18~48%. In the case of applying the RAR, however, a maximum 30% cost reduction was evaluated by the decrease in horizontal force to "0" theoretically. The cost reduction resulted from the decrease in wall thickness, base slab size, and number and material change of pile foundation for the abutment.

• Journal of the Korean association of regional geographers
• /
• v.8 no.4
• /
• pp.415-429
• /
• 2002

The end of cold war and the trend of the detente brought about many changes in the military security policy and in the munitions industry of the West-Europe : reduction of the defence budget, diminution of the military power force and armaments, decrease of the exportation and the domestic demand of ordnance, and augmentation of discharged laborers. This mutation caused the munitions industry and the war industrials regions to a crisis. The munition industrials enterprises which was confronted a crisis searched for diverse strategies like an reconversion to the civil products, an internal diversification and an external growth. And the European Union, the national government, and local or regional self-government implemented policies for diversification of regional economic with an reconversion in order to minimize the effect of the regional economic and society from the crisis of the munition industry.

• Composites Research
• /
• v.31 no.1
• /
• pp.8-11
• /
• 2018

Sheet molding compound (SMC) is one of the most economical fiber reinforced composite fabrication processing for automotive applications. In this study, we studied the optimum formulation for the production of SMC which shows low specific gravity without lowering the mechanical properties by using glass bubble (GB) which is a low specific gravity filler and glass fiber (GF) as a reinforcing material. The tensile strength increased with the increase of the GF in the SMC, and the specific gravity decreased with the increase of the GB. The synergistic effect of improving the mechanical properties as the specific gravity is lowered is found in the optimum formulation. The synergy effect was confirmed by the internal structure analysis that the dispersion effect of the crack propagation of the GB and the improvement of the binding force between the fiber and the matrix due to the incorporation of the GB.

• Tunnel and Underground Space
• /
• v.13 no.2
• /
• pp.100-107
• /
• 2003

Deformation is found by an external force in the rock which has internal stress. So, deformation is increased in time what is stressed under constant load. Rock materials collapse suddenly in a long period when the creep rate increases slightly. So mechanical deformability of the ground is an essential condition for determination of long term safety in structures. The result of analysis in 40%, 50%, 60%, 70% of constant load in creep test, strain velocity constants $\alpha$ and ${\gamma}$ increase with load increasement. Griggs equation is more exact than Li and Xia, Singh equation, and G$_2$of a flow constant by Burger's model decreases with stress increasement, but η$_1$,η$_2$and G$_1$ manifest irregularly in this study.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.7
• /
• pp.487-495
• /
• 2015

A generalized special program called planetary transmission analysis(here in after PTA) is developed to improve planetary gear noise in automatic transmission. PTA is capable of analyzing any typical one-degree-of-freedom automatic transmission gear train containing any number of simple, compound or complex-compound planetary gear sets. The kinematics module in PTA can compute the rotational speeds of gears and carriers and calculate the order frequencies to predict the planetary noise components. The power flow analysis module performs a complete static force analysis providing forces, moments, or torques of gears, bearings, clutches and connections. Based on the given type and number of planetary gear sets, the search algorithm determines all possible kinematic configurations and gear tooth combinations in a required set of gear ratios, while eliminating whole kinematic redundancies and unfavorable clutching sequences. By using PTA program, planetary internal speeds of new developed automatic transmission are early obtained; therefore, possibility of the noise problem could be predicted in early design stage. As implementing PTA in planetary gear NVH development procedure, planetary gear noise was successfully reduced by 10 dBA.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.4
• /
• pp.627-636
• /
• 2009

This study aims to provide a scientific basis for the abstract beauty of dance by analyzing the effects of controlling the breath during the walking motion of Korean dance. The objective of the study is to determine the significance of breathing during Korean dance, as it is externally expressed and technologically segmented, let alone the internal beauty of Korean dance. The results of this study show that the position of the body center and ASIS during the walking motion that uses breath was lower than that of the walking motion that does not use the breath. In addition, in each replacement of the knee joint and ankle joint, a narrow angle, in which bending is used a lot, appeared during the walking motion that uses the breath, but not during the walking gesture that does not use the breath. This occurred during the bending motion. In the first peak point, the vertical ground reaction force during the walking motion that uses the breath was higher than that during the walking motion that does not use the breath.

• The Journal of Engineering Geology
• /
• v.18 no.3
• /
• pp.277-285
• /
• 2008

For the soil nailing, recently, its application is expanded, but there is no officially approved method to design it yet. Furthermore, there are a great number of design valuables in soil nailing, it is also used without clear data under the situation that uncompleted detailed research on the sensibility between design variables. Especially, there has no deal with the installation angle of the nail - the major contents in this study. Therefore, this study based on the theoretical estimation analyzed safety rate about the angle of the nail, unit weight, adhesive force, internal friction angle and tensile farce worked on nail in the case of the rear of pond side is both horizontal and perpendicular. As a result, it could be verified that the safety rate increased on every cases in the situation of the nail installation angle was in upward direction than in downward direction.