• Wind and Structures
• /
• 제4권2호
• /
• pp.119-130
• /
• 2001

The paper addresses the suitability of wind pressure coefficients specified in contemporary design standards and codes of practice for gable roofs of intermediate slope (roof angle $10^{\circ}-30^{\circ}$). In a recent research study, a series of low building models with different roof slopes in this intermediate range were tested in a boundary layer wind tunnel under simulated open country terrain conditions. This was different from the original study in the 70's, which produced the current provisions on the basis of a model tested only for a single roof slope (4:12) in this range. The results of the study suggest that a modification to the American wind provisions would be warranted to make them more representative of the true local and area-averaged wind loads imposed on gable roofs of intermediate slope.

• 제어로봇시스템학회논문지
• /
• 제9권9호
• /
• pp.727-735
• /
• 2003

The determination of completion time constitutes an important step in developing algorithms for short-term production scheduling. Existing completion time algorithms of multi-product batch processes often assume that intermediate storage tanks are always available when it is needed. In this paper, we consider a serial multi-product batch plants with ZW and NIS policy intermediate storge tank. We limit storage residence time and allocated products in the intermediate storage tank to minimize the quality change of the stored material as well as to reduce the clearing time during product change. A set of recurrence relations is suggested to calculate the completion times for the given batch sequence of products on all processing units. Also analytic solution for the suggested model is solved by a graphical method. The effectiveness of these results is proved by a few illustrative examples.

• 영어어문교육
• /
• 제13권4호
• /
• pp.59-85
• /
• 2007

This study examined patterns of engaging in "reading in connection to writing" (hereafter reading-writing practices) in the context of two ESL college composition classrooms. The purpose of this study was to explore whether the L2 proficiency level could be a key construct in explaining similarities and differences in reading-writing practices which students engaged in during the composing process. Multiple sources of data collected over the semester included interview protocols, written products, and observational notes. The results showed that the three proficiency groups under examination differed widely in the ways reading was connected to writing and in the types of intermediate texts produced during the composing process. The students in the high proficiency group produced more intermediate texts through an engagement in reading-writing practices connected to each other. On the contrary, the students in lower proficiency groups engaged in a limited range of reading-writing practices without support of intermediate texts. This study provides insight into the different ways ESL college students coordinate reading and writing while composing essays.

• 한국소음진동공학회논문집
• /
• 제21권5호
• /
• pp.422-429
• /
• 2011

The critical fluid velocity of cantilevered cylindrical shells subjected to internal fluid flow is investigated in this study. The fluid-structure interaction is considered in the analysis. The cantilevered cylindrical shell is supported intermediately at an arbitrary axial position. The intermediate support is simulated by two types of artificial springs: translational and rotational spring. It is assumed that the artificial springs are placed continuously and uniformly on the middle surface of an intermediate support along the circumferential direction. The steady flow of fluid is described by the classical potential flow theory. The motion of shell is represented by the first order shear deformation theory (FSDT) to account for rotary inertia and transverse shear strains. The effect of internal fluid can be considered by imposing a relation between the fluid pressure and the radial displacement of the structure at the interface. Numerical examples are presented and compared with existing results.

• Geomechanics and Engineering
• /
• 제12권3호
• /
• pp.347-360
• /
• 2017

The problem of cylindrical cavity expansion incorporating deformation dependent of intermediate principal stress in rock or soil mass is investigated in the paper. Assumptions that the initial axial total strain is a non-zero constant and the axial plastic strain is not zero are defined to obtain the numerical solution of strain which incorporates deformation-dependent intermediate principal stress. The numerical solution of plastic strains are achieved by the 3-D plastic potential functions based on the M-C and generalized H-B failure criteria, respectively. The intermediate principal stress is derived with the Hook's law and plastic strains. Solution of limited expansion pressure, stress and strain during cylindrical cavity expanding are given and the corresponding calculation approaches are also presented, which the axial stress and strain are incorporated. Validation of the proposed approach is conducted by the published results.

• 대한전자공학회논문지
• /
• 제25권2호
• /
• pp.144-151
• /
• 1988

Between any two points in the Cartesian space, the straight motion has many distinct advantages in path/trajectory plannings, specially in a crowded workspace. But to achieve this motion is a nontrivial task. One standard way to approximate this motion is to plae enough intermediate points along the desired path and linearly interpolate two adjacent intermediate points in the joint space. In this approach, however, the determination of the minimum number of intermediate points is very important from several aspects. A scheme that can effectively accomplish this purpose is established in this paper. This scheme is based on several search methods. The results are demonstrated using the PUMA 560 series manipulator.

• International Journal of Computer Science & Network Security
• /
• 제22권5호
• /
• pp.266-276
• /
• 2022

The study aimed to pinpoint the effects of an educational environment based on gamification on developing achievement motivation among first-grade intermediate students. Using an achievement motivation scale, the study adopted a quasi-experimental design with experimental and control groups. The sample consisted of 52 students selected randomly from the first-grade intermediate students. They were studying in public intermediate schools in Jeddah at the time of this study. They were divided into two groups. The control group (n=24 respondent), and the experimental group (n=28 respondent). The results showed statistically significant differences at the level α ≥ 0.05 between the mean scores of the experimental group and the control group in the posttest of the achievement motivation measurement in favor of the experimental group. The study recommended using gamification in designing computer curricula and courses across educational stages in Saudi Arabia. It also recommends training the computer and information technology teachers on using gamification in their teaching.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.456-461
• /
• 2004

The dynamic behavior of sheet metals must be examined to ensure the impact characteristics of auto-body by a finite element method. An appropriate experimental method has to be developed to acquire the material properties at the intermediate strain rate which is under 500/s in the crash analysis of auto-body. In this paper, tensile tests of various different steel sheets for an auto-body were performed to obtain the dynamic material properties with respect to the strain rate which is ranged from 0.003/sec to 200/sec. A high speed material testing machine was made for tension tests at the intermediate strain rate and the dimensions of specimens that can provide the reasonable results were determined by the finite element analysis. Stress-strain curves were obtained for each steel sheet from the dynamic tensile test and used to deduce the relationship of the yield stress and the elongation to the strain rate. These results are significant not only in the crashworthiness evaluation under car crash but also in the high speed metal forming.

• 대한기계학회논문집A
• /
• 제31권2호
• /
• pp.182-189
• /
• 2007

This paper is concerned with the empirical flow stress constitutive equation of steel sheets for an auto-body with the variation of temperature and strain rate. In order to represent the strain rate and temperature dependent behavior of the flow stress at the intermediate strain rates accurately, an empirical hardening equation is suggested by modifying the well-known Khan-Huang-Liang model. The temperature and strain rate dependent sensitivity of the flow stress at the intermediate strain rate is considered in the hardening equation by coupling the strain, the strain rate and the temperature. The hardening equation suggested gives good correlation with experimental results at various intermediate strain rates and temperatures. In order to verify the effectiveness and accuracy of the suggested model quantitatively, the standard deviation of the fitted result from the experimental one is compared with those of the other two well-known empirical constitutive models such as the Johnson-Cook and the Khan-Huang-Liang models. The comparison demonstrates that the suggested model gives relatively well description of experimental results at various strain rates and temperatures.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.337-340
• /
• 2008

The cross section shape of intermediate die is one of important parameters to obtain dimensional accuracy of final product in shaped drawing process. Until now it has been designed by the experience or trial and error of the expert. In this study, the cross section shape of intermediate die fur spline shape is determined by the electronic field analysis, shape factor method. The result of the electronic field analysis, shape factor method has been compared with that of the present method. The effects of cross section shape on the dimensional accuracy were investigated by using FE analysis. And then the multi-stage shaped drawing experiments were performed to verify the results of FE analysis. As a result, the cross section shape from the electronic field analysis had the good dimensional accuracy. The electronic field analysis can be used for the method to obtain the cross section shape of intermediate die in shaped drawing process.