• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2000.05a
• /
• pp.512-512
• /
• 2000

Some planorbid snails such as Hippeutis cantori and Segmentina hemisphaerula have reported as the molluscan intermediate hosts of Neodiplostomum seoulense, one of important snail-borne human intestinal trematodes in Korea. However, one of the Korean lymnaeid snail species, Austropeplea ollular was also found to be the first intermediate ho of N. seoulense. In field-collected Austropeplea snails from Sorae and Kimpo out of se collected localities, the bifurcated cercariae of N. seoulense were shed (infection rat 0.3%), whereas no Radix auricularia and Fossaria truncatula were found shedding cercariae. Each of 12 tadpoles of Rana nigromaculata, known as the second intermedia host of N. seoulense, were exposed to 200 cercariae shed from field-collected A ollula. F tadpoles of R. nigromaculata were found to be massively infected with metacercariae o N. seoulense (recovery rate: 62.1%). Each of five rats (Sprague-Dowley strain) was or fed with 200 metacercariae, and eggs of N. seoulense were detected in the rat feces on week later. These rats were killed 4 weeks after postinfection and adult worms of N seoulense were recovered from the small intestines (recovery rate: 9%). This is the f report of A. ollula as the first molluscan intermediate host for N. seoulense in Korea.

• Journal of the Korean Ceramic Society
• /
• v.38 no.10
• /
• pp.881-885
• /
• 2001

Kinetics and mechanisms of intermediate phases formation in $Ba(Mg_{1/3}Ta_{2/3})O_3$, obtained by a solid state reaction were studied. $Ba{Ta_2}{O_6}$ and ${Ba_4}{Ta_2}{O_9}$ as intermediate products were first formed at $700^{\circ}C$. $Ba(Mg_{1/3}Ta_{2/3})O_3$ was appeared at $800^{\circ}C$. Several reactions take place on heating process. $Ba{Ta_2}{O_6}$ is found at the first stage of the reaction, and then $Ba{Ta_2}{O_6}$ or ${Ba_4}{Ta_2}{O_9}$ react with MgO to form $Ba(Mg_{1/3}Ta_{2/3})O_3$. The reaction of $Ba(Mg_{1/3}Ta_{2/3})O_3$ formation does not complete until fired at $1350^{\circ}C$ for 60 min. The kinetics of solid-state reaction between powdered reactants was controlled by diffusion mechanism, and can be explained by the Jander's model for three-dimensional diffusion.

• Journal of Internet Computing and Services
• /
• v.2 no.4
• /
• pp.69-81
• /
• 2001

This paper describes a parallel programming environment to help programmer to write parallel programs. Parallel program must be write according to the character of the various hardware or program. So it is difficult for the programs to write the parallel programmer. In this paper, we propose and implement a parallel programming environment using graph type intermediate representation form, and graph user interface is provided for programmer to get parallel programs easily, This parallel environment supports special functions using graph type intermediate representation form. The special functions involve program editing. data dependence analysis, loop transformation. CFG, PDG, HTG. This parallel environment helps users make parallelism and optimization easy through showing the intermediate code with graph.

• Nuclear Engineering and Technology
• /
• v.41 no.10
• /
• pp.1323-1332
• /
• 2009

The IHX (Intermediate Heat eXchanger) for a pool-type SFR (Sodium-cooled Fast Reactor) system transfers heat from the primary high temperature sodium to the intermediate cold temperature sodium. The upper structure of the IHX is a coaxial structure designed to form a flow path for both the secondary high temperature and low temperature sodium. The coaxial structure of the IHX consists of a central downcomer and riser for the incoming and outgoing intermediate sodium, respectively. The IHX of a pool-type SFR is supported at the upper surface of the reactor head with an IHX support structure that connects the IHX riser cylinder to the reactor head. The reactor head is generally maintained at the low temperature regime, but the riser cylinder is exposed in the elevated temperature region. The resultant complicated temperature distribution of the co-axial structure including the IHX support structure may induce a severe thermal stress distribution. In this study, the structural feasibility of the current upper support structure concept is investigated through a preliminary stress analysis and an alternative design concept to accommodate the IHTS (Intermediate Heat Transport System) piping expansion loads and severe thermal stress is proposed. Through the structural analysis it is found that the alternative design concept is effective in reducing the thermal stress and acquiring structural integrity.

• Journal of Korean Association for Spatial Structures
• /
• v.4 no.1 s.11
• /
• pp.77-86
• /
• 2004

It is the buckling of the compression portions of the deckplate that govern its behaviour under wet concrete construction loading. The size and position of intermediate stiffeners in the compression flanges of thin-plate steel decks exert a strong influence on the dominant buckling mode of the flange. Test sections composed of high-strength steel were brake pressed with a variety of Flat-hat intermediate stiffeners in the compression flange forming a progression from small to large stiffeners. The ABAQUS program to determine the effectiveness of intermediate stiffeners in controlling buckling modes is undertaken. A series of specimens are loaded with simple beam. Various buckling wave forms prior to ultimate failure through a plastic collapse mechanism. The experimentally determined buckling stresses are found to be comparable with studies performed using the ABAQUS program analysis and using each country code.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.456-461
• /
• 2004

The dynamic behavior of sheet metals must be examined to ensure the impact characteristics of auto-body by a finite element method. An appropriate experimental method has to be developed to acquire the material properties at the intermediate strain rate which is under 500/s in the crash analysis of auto-body. In this paper, tensile tests of various different steel sheets for an auto-body were performed to obtain the dynamic material properties with respect to the strain rate which is ranged from 0.003/sec to 200/sec. A high speed material testing machine was made for tension tests at the intermediate strain rate and the dimensions of specimens that can provide the reasonable results were determined by the finite element analysis. Stress-strain curves were obtained for each steel sheet from the dynamic tensile test and used to deduce the relationship of the yield stress and the elongation to the strain rate. These results are significant not only in the crashworthiness evaluation under car crash but also in the high speed metal forming.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.2 s.257
• /
• pp.182-189
• /
• 2007

This paper is concerned with the empirical flow stress constitutive equation of steel sheets for an auto-body with the variation of temperature and strain rate. In order to represent the strain rate and temperature dependent behavior of the flow stress at the intermediate strain rates accurately, an empirical hardening equation is suggested by modifying the well-known Khan-Huang-Liang model. The temperature and strain rate dependent sensitivity of the flow stress at the intermediate strain rate is considered in the hardening equation by coupling the strain, the strain rate and the temperature. The hardening equation suggested gives good correlation with experimental results at various intermediate strain rates and temperatures. In order to verify the effectiveness and accuracy of the suggested model quantitatively, the standard deviation of the fitted result from the experimental one is compared with those of the other two well-known empirical constitutive models such as the Johnson-Cook and the Khan-Huang-Liang models. The comparison demonstrates that the suggested model gives relatively well description of experimental results at various strain rates and temperatures.

• Journal of Information Display
• /
• v.6 no.4
• /
• pp.26-34
• /
• 2005

In this paper, a new rectification scheme to transform the uncalibrated stereo image pair into the calibrated one is suggested and its performance is analyzed by applying this scheme to the reconstruction of the intermediate views for multi-view stereoscopic display. In the proposed method, feature points are extracted from the stereo image pair by detecting the comers and similarities between each pixel of the stereo image pair. These detected feature points, are then used to extract moving vectors between the stereo image pair and the epipolar line. Finally, the input stereo image pair is rectified by matching the extracted epipolar line between the stereo image pair in the horizontal direction. Based on some experiments done on the synthesis of the intermediate views by using the calibrated stereo image pairs through the proposed rectification algorithm and the uncalibrated ones for three kinds of stereo image pairs; 'Man', 'Face' and 'Car', it is found that PSNRs of the intermediate views reconstructed from the calibrated images improved by about 2.5${\sim}$3.26 dB than those of the uncalibrated ones.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.33-38
• /
• 1995

In resist-discharge printing of cotton fabrics with reactive/reactive dyes the effects of intermediate drying on the white and the colored resist-dischargeabilities were studied. From the results of resist-discharge printing in case of 75% pick up, it was found that the most effective condition of intermediate drying which could at once prevent bleeding and improve the resist-dischargeability was 11$0^{\circ}C$ x 1min. The drying condition of 10$0^{\circ}C$ x 2min or 12$0^{\circ}C$ x 1min can be also recommended. It is important to pay close attention to the intermediate drying temperature and time. Because in case of 75% pick up when drying was carried on at 11$0^{\circ}C$ or 12$0^{\circ}C$ for more than 1 minute the resist-dischargeability was greatly lowerd by the fast fixation of ground color caused by high temperature, and in case of 100 % pick up the insufficient drying of ground color caused the resist-dischargeability to lower with giving rise to various troubles such as bleeding and smearing.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.1
• /
• pp.61-73
• /
• 2020

Tetracycline is one of the most commonly used antibiotics in domestic and foreign livestock industries to suppress the growth of pathogens. Tetracycline has been reported as a non-biodegradable compound. Therefore it has been not completely removed in the sewage treatment process. In this study, tetracycline was degraded using liquid ferrate (VI). Based on these experiments, the optimal water condition (pH and water temperature) were selected, appropriate liquid ferrate (VI) dosage was calculated, and finally the degradation pathway was estimated with the intermediate products detected by LC/MS/MS. All degradation experiments were completed within 30 seconds and the optimal condition was obtained in basic condition (pH 10) at room temperature (20℃). And the appropriate molar ratio between tetracycline and liquid ferrate (VI) was 12.5:1. Finally, 12 intermediate products were detected with LC/MS/MS and the degradation pathways and the degradation pathways and proposed the degradation pathways.