• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1086-1087
• /
• 2009

A small temperature sensor is designed in a 0.35um CMOS process. Transistors operating in the intermediate inversion region are employed in the core of the sensor. This temperature sensor operates in $-50^{\circ}C{\sim}120^{\circ}C$ with ${\pm}2^{\circ}C$ of accuracy after two-point calibration. This temperature sensor can be placed in the active pixel area of a display panel to measure the temperature of the display panel for temperature compensation.

• Microbiology and Biotechnology Letters
• /
• v.23 no.3
• /
• pp.282-287
• /
• 1995

Integrase (Int) carries out the cutting and resealing of attachment (att) site DNA via a covalent Int-DNA intermediate. A family of synthetic substrate DNAs was designed to accumulate Int-DNA intermediate. Int-DNA intermediates accumulated by half substrate was analyzed by SDS- KCI precipitation and restriction digestion. The results showed that Int-half DNA intermediate was circular and contained covalently bound Int molecule. Int-DNA intermediates were also trapped with three other kinds of synthetic substrates.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1453-1456
• /
• 2004

PARO, a power-aware routing optimization mechanism, is proposed in [1] to minimize the transmission power needed to forward packets between wireless devices in ad hoc network. The mechanism works by redirecting the route to pass through one or more intermediate nodes on behalf on source-destination pairs, then reducing the end-to-end transmission power. This paper will show an extension of this model and provide an analysis of the geometrical area lying between source and destination in which the intermediate node elects to perform redirection. The duration the intermediate node stays in that area is also computed.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.134-137
• /
• 2002

PYP consists of a water-soluble apoprotein and 4-hydroxycinnamyl chromophore bound to Cys69 via thiolester linkage, Upon absorption of a photon, the photocycle is initiated, leading to formation of several photo-intermediates. Among them, M intermediate is important to understand the signal transduction mechanism of PYP, because it is a putative signaling state. As well known, the dynamics of a protein is closely correlated with the occurrence of its function. Here we report the results of IO ns molecular dynamics (MD) simulation for the M intermediate in aqueous solution and discuss the characteristic feature of this state from a viewpoint of structural fluctuation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.537-540
• /
• 1999

The primary objective of this study is to make a contribution to the construction of 40~60 story R/C high rise building by developing the reinforcing details which can improve the seismic performance of high-strength (f'c=700kg/$\textrm{cm}^2$, fy=4000, 8000kg/$\textrm{cm}^2$) R/C beam-column joints. And the purpose of this study is to investigate experimentally the effect of load history on the total energy dissipation capacity of reinforced concrete flexural members. The reinforcing details which can make beam plastic hinging zones moved and spreaded from the column face is proposed to insure the ductile behavior of high-strength RC beam-column joints. The intermediate reinforcement which is horizontally anchored by interlinking each intermediate reinforcements is proposed and tested to examine the mechanical performance of proposed details. Main variables are the shape of the intermediate reinforcements and yield strength of rebars. From the test results, the newly proposed intermediate reinforcement details can move and spread the beam plastic hinging zone about 1.0d from the column face.

• Journal of the korean society of oceanography
• /
• v.32 no.1
• /
• pp.8-16
• /
• 1997

The ventilation theory developed by Luyten, Pedlosky and Stommel (1983) is applied to the East Sea to understand the general circulation pattern of the Intermediate Water, especially the ventilated circulation beneath the Tsushima Warm Current. The original model is slightly modified such that it takes the inflow-outflow of the Tsushima Current into consideration. Results of the model indicate that for sufficiently strong Ekman pumping, the Intermediate Water circulates cyclonically by ventilation. The Intermediate Water subducts beneath the Tsushima Warm Water through the western boundary layer. Off the western boundary layer, it turns northward, outcrops to the north by passing the polar front and continues to flow northward until it finally is absorbed by the northern boundary layer. This result seems to be compatible with some recent observations. Over the ventilated area, the transport of the Tsushima Current is negligible and most transport occurs in the shadow area where the Intermediate layer is motionless indicating that, over the deep motionless layer, the two-layered vertical structure under consideration becomes substantially single-layered.

• Journal of Photoscience
• /
• v.6 no.1
• /
• pp.13-19
• /
• 1999

Irradiation of 1-(o-allyloxyphenyl)-2-pentamethyldisilanylenthyne 2a in methanol yields two 1 : 1 photoaddition products 3 and 4 via silacyclopropene intermediate. Photolysis of 2a with acetone in deaerated methylene chloride yields site specific and regioselective 1 : 1 adducts 6 ad 7 via silacyclopropene and 1-sila-1, 2-propdiene intermediate, respectively. Photolysis of 2a and 1-(o-(3', 3'-dimethyl-2'-propenylox)phenyl)-2-pen-tamethyldisilanylethyone 2b in benzene provides novel stereoselevtive intramolecular cyclization products 10 and 11, respectively. Irradiation of 1-(o-acetoxyphenyl)-2-pentamethyldisilanyl ethyne 2c in benzene yields the photo-Fries rearrangement products 18 and 19 and a photoproduct 17 via silacyclopropene intermediate. Photolysis of 1-(o-methoxycarbonlymethoxyphenyl)-2-pentamethyl disilanylenthyne 2d in benzene provides a novel intramolecular cycloaddition product 25 and 1-(o-methoxycarbonylemthoxiyphenyl)-2-trimethylsilylethyne 26 via silacyclopropene intermediate.

• Transactions of Materials Processing
• /
• v.9 no.3
• /
• pp.304-312
• /
• 2000

An inverse finite element approach is employed to efficiently design the optimum blank shape and intermediate shapes from the desired final shape in multi-stage elliptic cup drawing processes. The multi-stage deep-drawing process is difficult to design with the conventional finite element analysis since the process is very complicate with the conventional finite element analysis since the process is very complicated with intermediate shapes and the numerical analysis undergoes the convergence problem even with tremendous computing time. The elliptic cup drawing process needs much effort to design sine it requires full three-dimensional analysis. The inverse analysis is able to omit all complicated and tedious analysis procedures for the optimum process design. In this paper, the finite element inverse analysis provides the thickness strain distribution of each intermediate shape through the multi-stage analysis. The multi-stage analysis deals with the convergence among intermediate shapes and the corresponding sliding constraint surfaces that are described by the analytic function of merged-arc type surfaces.

• Journal of Korea Multimedia Society
• /
• v.22 no.12
• /
• pp.1438-1446
• /
• 2019

Recently, the number of mobile users as well as high-speed Internet user has been increasing rapidly. Moreover, traffic is growing fast as services that provide real-time content such as Youtube and Netflix become popular. The problem of traffic control in real-time content services is important because many people use cell phones to receive real-time content. In this regard, the field of CCN is currently being studied. We studied the mobility of nodes among CCN research fields. Node mobility can be divided into three categories : consumer mobility, intermediate node, and provide mobility. In this paper, we propose Mobility Node Support(MD-INS) to support the intermediate-node mobility in CCN real-time services. Experimental results show that the proposed scheme shows better performance than CCN in terms of service disconnection time and packet loss.

• East Asian Economic Review
• /
• v.21 no.4
• /
• pp.295-315
• /
• 2017

This paper derives the gravity equation with intermediate goods trade. We extend a standard monopolistic competition model to incorporate intermediate goods trade, and show that the gravity equation with intermediates trade is identical to the one without it except in that gross output should be used as the output measure instead of value added. We also show that the output elasticity of trade is significantly underestimated when value added is used as the output measure. This implies that with the conventional gravity equation, the contribution of output growth can be substantially underestimated and the role of trade costs reduction can be exaggerated in explaining trade expansion, as we demonstrate for the case of Korea's trade growth between 1995 and 2007.