• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.830-837
• /
• 2005

ISI is caused by delay spread in the multipath channel environment. There are two kinds of channel equalizer: Linear and Non-Linear type according to the structures. In this paper, we propose an improved adaptive linear equalizer to mitigate ISI. The proposed adaptive equalizer is constructed by using asymmetrical Dsmvenu filter based on USE sub-optimal receiver. Asymmetrical structure of the transversal filter is realized by moving the main tap position from center to side. If this structure is used, we can divide ISI to precusor and postcusor. As a result the proposed equalizer has a larger extended compensation range than conventional adaptive linear equalizer. In computer simulation, we compare the bit error rate performance of the proposed linear equalizer with the conventional one on the S-V channel which is modeled for WB systems.

• Journal of Convergence for Information Technology
• /
• v.10 no.10
• /
• pp.24-31
• /
• 2020

In non-orthogonal multiple access (NOMA), the degraded performance of the weaker channel gain user is a problem. In this paper, we propose the asymmetric binary pulse amplitude modulation (2PAM), to improve the bit-error rate (BER) performance of the weaker channel user in NOMA with the tolerable BER loss of the stronger channel user. First, we design the asymmetric 2PAM, calculate the total allocated power, and derive the closed-form expression for the BER of the proposed scheme. Then it is shown that the BER of the weaker channel user improves, with the small BER loss of the stronger channel user. The superiority of the proposed scheme is also validated by demonstating that the signal-to-noise ratio (SNR) gain of the weaker channel user is about 10 dB, with the SNR loss of 3 dB of the stronger channel user. In result, the asymmetric 2PAM could be considered in NOMA of 5G systems. As a direction of the future research, it would be meaningful to analyze the achievable data rate for the propsed scheme.

• Current Optics and Photonics
• /
• v.2 no.1
• /
• pp.15-22
• /
• 2018

To measure atmospheric temperature, water vapor, and aerosol simultaneously, an efficient multi-function Raman lidar using an ultraviolet-wavelength laser has been developed. A high-performance spectroscopic box that utilizes multicavity interference filters, mounted sequentially at small angles of incidence, is used to separate the lidar return signals at different wavelengths, and to extract the signals with high efficiency. The external experiments are carried out for simultaneous detection of atmospheric temperature, water vapor, and aerosol extinction coefficient in Beijing, under clear and hazy weather conditions. The vertical profiles of temperature, water vapor, and aerosol extinction coefficient are analyzed. The results show that for an integration time of 5 min and laser energy of 200 mJ, the mean deviation between measurements obtained by lidar and radiosonde is small, and the overall trend is similar. The statistical temperature error for nighttime is below 1 K up to a height of 6.2 km under clear weather conditions, and up to a height of 2.5 km under slightly hazy weather conditions, with 5 min of observation time. An effective range for simultaneous detection of temperature and water vapor of up to 10 km is achieved. The temperature-inversion layer is found in the low troposphere. Continuous observations verify the reliability of Raman lidar to achieve real-time measurement of atmospheric parameters in the troposphere.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.89-95
• /
• 2017

UFMC is known as a candidate for the 5G wireless communication system because it is robust against ICI and better performs in asynchronous situation than OFDM. In the UFMC system, the filtering is performed for each subband so the performance of the filter is very important. The Dolph-Chebyshev filter has been used in conventional UFMC system because of its small out-of-band radiation. However it has distortion in the sub-band and skirt characteristics is not good enough. Therefore, it is necessary to study a new type of UFMC filter which reduces the distortion in the subband and has sharp skirt characteristics. In this paper we analyze the effect of filter frequency response in UFMC system and suggest the wavelet based type of filter that substitutes the Dolph-ChebyShev filter used in the conventional UFMC system. The simulation results show that wavelet filter has better BER performance in multipath fading channels than conventional filters.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1365-1372
• /
• 2014

In recent, the LTE(Long-Term Evolution) mobile communication system has been commercialized and a variety of service is being provided. Comparing to the old wireless access systems such as 3G mobile communications, in particular, the LTE system supports a service requiring a high transmission rate by providing broadband wireless access. In order to understand the possibility of successful support of a multimedia service such as IPTV(Internet Protocol Television) through the LTE system, it is necessary to understand the mechanism that decides the transmission rate supported by the LTE system. This paper, therefore, discusses on the relationship between a number of metrics such as CQI and BLER that affects the transmission rate with the measurement results from the field tests.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.43-46
• /
• 2015

Recently, full-duplex communications has been considered as one of the most promising techniques for net-generation mobile communication system. In this paper, we propose a compressed sensing based signal detection technique for full-duplex generalized spatial modulation (FD-GSM) systems. In FD-GSM systems, some antennas are used for signal transmission according to input data and the otehrs are used for detecting signals received over the same frequency band. The self-interference (SI) is assumed to be completely removed by help for the recently proposed SI cancellation techniques. The proposed signal detection technique significantly outperforms the conventional ones in terms of symbol error rate (SER). We will investigate the optimal number of used antennas in FD-GSM systems.

• The KIPS Transactions:PartC
• /
• v.11C no.5
• /
• pp.671-676
• /
• 2004

In this paper, we propose ultra-fast multimedia optical subscriber access network using optical frequency domain CDMA method in order to access the multimedia with multiple data rates. We numerically analyze the effects of spectral power distortion in the light source for the optical CDMA system modified PN codes and FBG(Fiber Bragg Grating)s. In the proposed multiple-rate multimedia access optical networks, the performances such as BER(Bit Error Rate) are the same for all data regardless of data rates in the case of the same number of simultaneous ONU. In the proposed ultra-fast multimedia optical subscriber access network, the performances for all data are much more improved than those in the conventional system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.9-17
• /
• 2004

Adapt ive and fixed step size PC (power control) schemes for accommodating voice, video, and data are evaluated according to the different PC command rates and their effects on integrated Voice/Video/Data are investigated. The required minimum power levels are derived as PC thresholds and the effects of PC errors on channel quality and radio 1 ink capacity are investigated. The services with high bit rates and low bit error rates can cause a significant effect on the radio link qualifies of the other types of traffic. The results show that the adapt ive step size PC scheme for voice/video/data services can achieve more capacity and cause less interference to the radio channels because less minimum PIL(Power Increment Level) is required for the specified radio link outage probability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8C
• /
• pp.667-679
• /
• 2010

The use of femtocells in buildings and homes has been widely studied as a means to enlarge the cell coverage and increase the network capacity of mobile communication systems. Femtocells for Mobile WiMAX (M-WiMAX) using time division duplexing (TDD) requires frame synchronization with neighboring base stations to avoid interference between uplink and downlink signals. In this paper, we propose a new frame synchronization method for femtocell using IEEE 802.11 based wireless backhaul, which transfers the time information of mobile network to femtocells via the beacon signal provided by IEEE 802.11. Also, in order to reduce timing error of the proposed method, we modify the collision avoidance scheme in the transmitter of IEEE 802.11 and apply a timing estimation technique designed in the sense of least squares to the receiver of IEEE 802.11. Through computer simulations using the proposed scheme, we evaluate the performance of frame synchronization for femtocells and show that the recovered timing information satisfies the timing specification defined by M-WiMAX standard.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.7 s.196
• /
• pp.90-97
• /
• 2007

This paper describes the development of 6-axis force/moment sensor considered adult weight far an intelligent foot of humanoid robot. In order to walk on uneven terrain safely, the foot should perceive the applied forces Fx, Fy, Fz and moments Mx, My, Mz to itself and control the foot using the forces and moments. The applied forces and moments should be measured from a 6-axis force/moment sensor attached to the foot, which is composed of Fx sensor, Fy sensor, Fz sensor, Mx sensor, My sensor and Mz sensor in a body. Each sensor should get the deferent rated load, because the applied forces and moments to foot in walking are deferent. Therefore, one of the important things in the sensor is to design each sensor with the deferent rated load and the same rated output. In this paper, a 6-axis force/moment sensor (rated load of Fx and Fy are 500Nm and Fz sensor is 1000N, and those of Mx and My are 18Nm, Mz sensor is 8Nm) for perceiving forces and moments in a humanoid robot's foot was developed using many PPBs (parallel plate-beams). The structure of the sensor was newly modeled, and the sensing elements (plate-beams) of the sensor were designed using by ANSYS software (FEM (Finite Element Method) program). Then, a 6-axis force/moment sensor was fabricated by attaching strain-gages on the sensing elements, and the characteristic test of the developed sensor was carried out. The rated outputs from FEM analysis agree well with that from the characteristic test.