• Journal of the Korea Society of Computer and Information
• /
• v.26 no.9
• /
• pp.97-104
• /
• 2021

Since 1993, Successfully localized naval combat System has made steady development on various domestic and foreign ships. On the other hand, Engineering Control System(ECS) is dependent on foreign companies. Therefore, there is a lot of interest and research in the localization of ECS in the navy defense industry. As one of various studies, a preliminary study of domestic ECS software that can be commonly applied to naval ships is in progress. This paper propose Ecs Obts Scalable Platform(EOSPA) as the standard architecture of ECS On-Board Training System(OBTS) software by applying object-oriented programming and standardization. And this introduces EOSPA's structure, function, and features of each component. Furthermore, high reusability and maintainability are expected in the development of ECS OBTS software applying EOSPA in various naval ships.

• Korean Journal of Agricultural Science
• /
• v.48 no.1
• /
• pp.103-117
• /
• 2021

The severe effects of climate change, such as global warming and the El Niño phenomenon, have become more prevalent. In recent years, natural disasters such as drought, heavy rain, and typhoons have taken place, resulting in noticeable damage. Korea is affected by droughts that cause damage to rice fields and crops. Societal interest in droughts is growing, and measures are urgently needed to address their impacts. As the demand for high-quality agricultural products expands, farmers have become more interested in water management, and the demand for field irrigation is increasing. Therefore, we investigated water demand in the irrigation of drought-vulnerable crops. Specifically, we determined the water requirements for crops including cabbage, red pepper, apple, and bean in four regions by calculating the consumptive water use (evapotranspiration), effective rainfall, and irrigation capacity. The total consumptive water use (crop evapotranspiration) estimates for Dangjin-si (cabbage), Yesan-gun (apple), Cheongyang-gun (pepper) in Chungnam, and Goesan-gun (bean) in Chungbuk were 33.5, 206.4, 86.1, and 204.5 mm, respectively. The volumes of groundwater available in the four regions were determined to be the following: Dangjin-si, 4,968,000 m³; Yesan-gun, 4,300,000 m³; Cheongyang-gun, 1,114,000 m³, and Goesan-gun, 3,794,000 m³. The annual amounts available for the representative crops, compared to the amount of evapotranspiration, were 313.9% in Dangjin-si, 29.5% in Yesan-gun, 56.1% in Cheongyang-gun, and 20.1% in Goesan-gun.

• Journal of Digital Convergence
• /
• v.17 no.11
• /
• pp.501-508
• /
• 2019

Today, home gardening is in the spotlight. Therefore, the necessity of developing a new type of gardening product was raised according to the consumer's desires. This study, the contents were developed using sparrows, a helper who helped the bean rat's grain-cracking task among the characters of 'kongjwi patjwi'. The cultural contents convergence product is a lid production that is used at the end of the plant support. The fabrication method was designed using UG NX program after design research, and after printing by 3D polyjet method, mold was made and cast into silicon and resin. Through product manufacturing, we could confirm the public's interest in the possibility of new products and creativity. In the future, it is expected that the development of products incorporating cultural contents through various cultural archetypes will be activated, contributing to the enhancement of economic added value and national brand value.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.7
• /
• pp.873-878
• /
• 2020

Due to the recent development of 3D printers, interest in 3D printing is growing. 3D printing should reflect individual needs and various requirements by designing products to suit the user's requirements. Research on how to use 3D printed products for the purpose of purchasing products according to user's demand characteristics is insufficient. Therefore, this study conducted a survey and statistical analysis to find out the factors influencing the intention of purchasing custom controller products in 3D printing environments. Research has confirmed that user innovation and convenience safety are important factors for the satisfaction and purchase intent of personal-tailored controller products. Considering user innovation, convenience, and safety when producing controller products using 3D printing, it is expected that value of custom controller manufacturing can be increased. Research is needed on the personalized product development framework that successfully introduces and systematically supports the production methods of personalized products in the early stages.

• Journal of Industrial Convergence
• /
• v.18 no.6
• /
• pp.33-39
• /
• 2020

The multi-screen image system could make the audiences appreciate contents without special devices by expansively composing the images played on a single screen to many facets suitable for the use, which could provide the great immersiveness to the audiences. Based on the recent interest in realistic images, it is produced as films through the multi-projection technology such as Screen X or Escape, and it is developed into the media that could deliver stories and information. Also, the size of display tends to gradually get larger while the image quality is improved to high definition. Thus, the development is accelerated in the form of Digital Signage that could play the high definition image contents by solidly composing many HD or UHD display screens. Moreover, through the convergence of digital technologies, it is developed into the higher value-added industry that could have two-way communication. This study aims to understand the developmental history of multi-screen image from 1950 to the present, technical analysis, and the production method, and then to research how to minimize the image degradation when playing the contents, in various platforms using the multi-screen image.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.135-141
• /
• 2021

Interest is growing in the design and development of square wave driven BLDC permanent magnet motors suitable for industrial automation, and the development of position detection circuits and drivers. However, this motor is somewhat limited in its application despite the price and functional advantages due to the decrease in efficiency due to switching loss and vibration and noise. In the process of designing and assembling a BLDC motor, the magnetic pole angle is not uniform or the magnetic flux distribution is distorted due to problems in magnetic circuit design or product non-uniformity in the assembly process. Therefore, these things cause position detection deviation and deteriorate the motor characteristics. In addition, the sine wave driven BLDC system can operate stably only when the signal generated from the position sensor is accurately fed back to the driver. However, since the generated signal cannot perform stable position detection due to the occurrence of DC offset component due to magnetic flux density deviation or magnetization technology, which is an external influence, this study intends to study the proposed circuit that can remove the DC offset component.

• The Korean Journal of Mycology
• /
• v.49 no.1
• /
• pp.33-44
• /
• 2021

Lentinula edodes (Berk.) Pegler, the most produced mushroom in the world, is an edible mushroom with very high nutritional and pharmacological value. Currently, interest in the protection of genetic resources is increasing worldwide, and securing the distinction between new cultivars is very important. Therefore, the development of efficient molecular markers that can discriminate between L. edodes cultivars is required. In this study, we developed cleaved amplified polymorphic sequence (CAPS) markers for the identification of L. edodes cultivars (Sanbaekhyang and Sulbaekhyang). These markers were developed from whole genome sequencing data from L. edodes monokaryon strain B17 and resequencing data from 40 cultivars. A nucleotide deletion existed in scaffold 19 POS 214449 in Sanbaekhyang (GT→G), and a single nucleotide polymorphism changed in scaffold 7 POS 215801 in Sulbaekhyang (G→A). The restriction enzymes Hha I and HpyCH4IV distinguished Sanbaekhyang and Sulbaekhyang, respectively, from other cultivars. Thus, we developed two CAPS markers for the identification of the L. edodes cultivars Sanbaekhyang and Sulbaekhyang.

• Food Science and Industry
• /
• v.49 no.4
• /
• pp.94-99
• /
• 2016

Development of synthetic vinegar has been focused on the acidic taste typically caused by acetic acid. Recently, consumer interest in fermented vinegars which contain a variety of valuable nutrients increased growth of the beverage industry. Vinegar beverages made of a variety of foreign fruits such as pineapple, grapefruit, and aloe are being commercialized to meet market needs from female consumers interested in beauty. However, commercialization of traditional fermented vinegars using regional products such as rice has not been successful yet compared to fruit vinegar beverages. Systematic research for development and commercialization of functional value-added traditional vinegars made of regional agricultural products should be performed. In this study, type and manufacturing methods of traditional vinegar were reviewed based on classic literatures.

• Journal of the Korean Society of Safety
• /
• v.36 no.2
• /
• pp.58-67
• /
• 2021

Incident investigation is regarded as a means to improve safety performance. For the prevention of industrial accidents, measures such as providing safety education, enhancing management interest and participation, establishing a safety management system, and conducting inspection of the work site are necessary. In particular, accident investigation activities, which are an important element of safety management, help to prevent similar accidents, thereby minimizing damage and enhancing work safety. They are critical for understanding business-related incidents and the vulnerabilities and opportunities associated with them. Therefore, it is clear that accident investigation activities are important for accident prevention. The primary focus of many incident investigation processes is on identifying the cause of an event. While considerable research has been conducted on potential accident investigation tools there has been little research on including the views and experiences of practitioners in the accident investigation process. In this study, a questionnaire survey was conducted among safety managers in the domestic manufacturing/construction industry to understand the practice of accident investigation. The investigation pertained to companies' accident investigation systems, the competence of investigators, and the identification and recommendations of the cause of accidents. From the analysis results of accident investigations, investigators' competence, the difficulty level of investigations, and the root causes of accidents were identified from the viewpoint of the participants of the accident investigations. In particular, the development of standardized and simple accident investigation methods and their dissemination to companies were found to be necessary for activating the root cause of accidents. Based on this, it can be used as basic data for the development of root cause analysis investigation techniques that are easily applicable to organizations.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.147-153
• /
• 2020

This study is aimed at a basic infrastructure for realizing urban air mobility (UAM) and personal air vehicle (PAV), which have recently been high interest as new means of transportation. The development of UAM and PAV technologies is a field of a high added value that the world is competitively pushing for the world. However, the three most fundamental aspects are the establishing an aviation certification system, finding reliable manufacturers having advanced technical abilities, and the training/securing of professional manpower. Above all, the aviation certification system will be established for the first time. Based on the certification system, it will be possible to realize the government's policy goal of introducing new means of transportation, including the production of aircraft and to realize commercialization that meets international standards that satisfy conformity and compliance. In addition, finding reliable manufacturers, fostering professionals, and establishing an educating system for stable supplying of the professionals are main projects to become a leading country in the field.