• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.278-279
• /
• 2015

Recently, With the development of smart devices of interest in the intelligent indoor positioning service with a smart terminal it is increasing. The BLE(Bluetooth Low Energy) is an indoor location positioning technology has attracted the attention. However, there is no way to check the reliability of the position information collected by the smart terminal receiving a big location data. This is because the reliability of an indoor position information because of a signal interference to drop. In this paper, we propose a method of managing big data collected in order to obtain reliable position information from the position information of iBeacon.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.762-766
• /
• 2013

Interest in Wireless Power Transmission (WPT) technology has been increasing worldwide recently. This trend is proved by commercialized products such as electric toothbrush, wireless razor, and wireless charger for mobile phone battery. Studies for enhancing the applicability of the technology have been continuously conducted. Currently the WPT technology is based on the technologies using microwave, inductively coupling, and magnetic resonance. In the meantime, development of the microwave-based WPT faces difficulty due to health hazards involved in the technology, and application of the WPT technology using inductively coupling is restricted by area due to the problem of transmission length. In comparison, the WPT technology using magnetic resonance draws attention in terms of efficiency and transmission length. In this study, the sending coil based on the WPT technology using magnetic resonance system was replaced with an HTS coil to enhance transmission efficiency. Since the HTS coil has a zero resistance, power transmission loss can be minimized. At the same time, size of the current density could be increased to 100 times or more than typical coils. In addition, through impedance matching of LC device, maximal resonance properties were induced and consequently, frequency selection quality characteristics or Q was enhanced. As a result, the WPT type using the HTS coil showed a longer transmission length and better transmission efficiency compared with the WPT type using typical coils.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.538-539
• /
• 2013

Recently it has been increasing interest of serious game which make broadened to wide area in game field. Among these, educatioonal serious game is not only satisfied with the purpose of fun and education but also has been looking ar new ways of teaching with distribution of digital textbook. It can lead to change the way we understand things using the revitalization on the basis of serious game competitions. The purpose of this study was to analysis of educational game and game competition and to develop the efficient management stragies.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.785-786
• /
• 2017

Recently, interest in AMOLED (Active Matrix OLED) panels has been growing with the development of displays used in each device. Therefore, the demand for the inspection equipment required for production is spreading, and therefore, efficient design is required to operate a plurality of signal generators. In this paper, we propose a central server management system for signal generators. The proposed system includes a method for driving an AMOLED panel, and the timing and power setting results are presented. Thus, it is possible to cope with loss or alteration of data, and it is believed that stable and smooth communication is possible.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.2
• /
• pp.90-98
• /
• 2003

Recently, the increasing application of electronic equipments and information devices has heightened the interest in power qualify. The term power quality is applied to a wide range of electromagnetic phenomena on the power system and is also concentrated by all areas such as utilities, their customers and suppliers of load equipments. In engineering terms, power Qualify is expressed by voltage qualify because the power supply system can only control the quality of the voltage. Therefore, the standards in power quality area are devoted to keep the supply voltage within allowable limits. This paper deals with single-phase unified power quality conditioner (UPQC), which ai s at the integration of series-active and shunt-active filter. The series filter il used to compensate for the voltage distortions and the shunt filter is used to provide reactive power and counteract the harmonic current injected by the load. Also, the voltage of the DC link capacitor is controlled to a desired value by the shunt active filter. The validity of the proposed UPQC is demonstrated using both the MATLAB/SIMULINK simulation and the experimental device with DSP (TMS320C32).

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.4
• /
• pp.247-254
• /
• 2004

The mechanical informations such as the rotor speed and angle are required to operate the Cylindrical Permanent Magnet Synchronous Motor(PMSM). A resolver or encoder is typically used to supply the mechanical informations. This position sensor adds length to the machine, raises system cost, increases rotor inertia and requires additional devices. As the result, there has been a significant interest in the development of sensorless strategies to eliminate the position sensor. This paper presents an implementation of the new sensorless speed comtrol scheme for a PMSM. In the proposed algorithm, the line currents are estimated by a observer and the estimated speed can be yielded from the voltage equation because the information of speed is included in back emf. But the speed estimation error between the estimated and the real speeds is occured by errors due to measuring the motor parameters and sensing the line current and the input voltage. To minimize the speed estimations error, the estimated speeds are compensated by using an instantaneous reactive power in synchronously rotating reference frame. In this paper, the proposed algorithm is not affected by mechanical motor parameters because the mechanical equation is not used. The effectiveness of algorithm is confirmed by the experiments.

• Proceedings of the KIEE Conference
• /
• 2005.10a
• /
• pp.109-112
• /
• 2005

The main purpose of this study is to prepare an outline for developing of the module-type text-book system on the customize curriculum management and Contents Systems that achieve self-study systems to make the students adopt themselves into new study atmosphere and maximize the result of study on Osan college in Electric-Electronic field. Questionnaire posed to analyze the demand of teaching materials to the students, and professors and also to find characteristics of students in Osan college. The SPSSWIN/PC+ statistics package was used to assay the collected answers. And simple frequency with percentage, average, and standard deviation were calculated to check the entire trend and actual state of teaching. Therefore, the improvement of the existing teaching materials was demanded while the fundamental ability to study of general students is declining. Consequently, it is necessary to introduce new teaching materials which are simple, easy, and organized to offer the students study desire and interest.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.10-11
• /
• 2018

Internal Insulation system is applied to the most apartment building in Korea. However due to the importance of building energy enhanced the interest of the exernal insulation system. The extermal insulation system has better thermal performance because the thermal bridge through the structure are rarely formed. But the thermal bridge around the window decrease the thermal performance of the envelope system. Therefore the technology for reducing the thermal bridge around window improves energy efficiency of the building. In order to this it is necessary to minimize the thermal bridge around window of building. In this study it is aimed to minimize the thermal bridge around the window of building. It was confirmed that the use of thermal bridge barrier imporved the heat transfer rate by 64% or more and the condensation reduction phenomenon by 42% or more compared with the exist technology. These thermal bridge barrier will be used as the main technology to improve the energy efficiency of building.

• Management & Information Systems Review
• /
• v.14
• /
• pp.181-193
• /
• 2004

This paper is concerned with the study of 'Knowledge Management', a paradigm of thought based on the idea that the future will be a knowledge-centered society. This paper also provides an overview of both 'what to manage' and 'how to manage' if an organization wants to develop in this environment. The process of 'Knowledge Management' begins with a decision. Presented with a myriad of information, of which we can't afford to obtain it all, what information is of value to the organization? Further, by systematically organizing not only the primary information but also that which was accumulated in the process, Knowledge Management is capable of suggesting a value-added plan of action. This research presents the necessary principles needed in order to successfully use Knowledge Management, specifically a harmony between the human and technological aspects. There cannot be a static solution to the problem, as the environment of the enterprise's problem is dynamic in nature. Throughout the process, the enterprise will constantly change its strategy and structure in order to adapt to variable knowledge, technology, strategy, regulations, consumer interest, etc... The essential constant of these problems is the importance of spending on education. Investments in educations help develope a infrastructure for Information Technology, the development of knowledge distribution strategies, and the creation of efficient Knowledge Management policy.

• Spatial Information Research
• /
• v.14 no.3 s.38
• /
• pp.335-347
• /
• 2006

The GIS has grown in its quantity as local authorities established the urban information system for better city administration, civilian services and decision-making support services. Recently, local authorities have expressed much interest on the introduction of ubiquitous technology to improve citizens' safety and convenience. This has become the drive behind the construction of ubiquitous city(u-City). Construction of a u-City requires the multitude of information and telecommunication networks and digital contents; the existing information resources need to be put to use in entirety for that end. In that regard, the integration of GIS established and currently operated by local authorities needs to be strategically promoted. This study intends to propose GIS integration strategies in various aspects for the future u-City and directions for the development of urban information systems in the coming of the Ubiquitous Age.