• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.679-681
• /
• 2005

The materials for transmission line construction were transported by road which opened in mountainous areas until the mid 1990s, However, from the mid 1990s, as social interest in the environment standard increases, a cable way and helicopter transport methods of construction have been applied to minimize damage to the environment and to build an environmental friendly system. The current cable way method is a single cable way system which has a lower section base to load materials into a carriage and carry them to the tower construction site by use of an engine and a main rope. Then the carriage lowers itself via a slope between the tower construction site and the lower section base. The single cable way system has the demerits of site acquisition for the lower section base, forest felling when installing the wire rope, and it is not applicable to a even topology Also it has to be installed separately at each tower site. Accordingly, to carry materials without forest felling and regardless of slope, the chain cable way system was developed to provide materials for more than two towers consecutively by use of an engine carriage and winch.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.203-216
• /
• 2008

As the service quality measurement has been developed, various fields of service quality measurement have evolved. Especially the development of the mobile communication service and its status has been watched with keen interest. The growth of mobile communications has not developed alone. It evolved with the growth of the mobile communications company and the device manufacturer. This research investigates the mutual relation sand influence between the service quality and the device quality. This is a distinguished phenomenon within the existing research. Currently in Korea mobile devices can be purchased independently of network provider; however, there are also arrangements whereby the manufacturer supplies devices through only selected service providers. The model of service quality measurement is not a simple fragment model for the service quality anymore. It is required to establish the ultimate model for the service quality to determine if the customer differentiates between the device and service quality. Knowing if a customer differentiates between device and service can aid strong brands when deciding which partners to select for collaborative strategies. The aim of this research is to determine the significant difference between the models of service quality measurement based on differing levels of brand awareness.

• Transactions of Materials Processing
• /
• v.29 no.2
• /
• pp.76-88
• /
• 2020

The need for advanced high strength steel (AHSS) forming technology is increasing as interest in light weight and safe automobiles increases. Multipoint dieless forming (MDF) is a novel sheet metal forming technology that can create any desired longitudinal and transverse curvature in sheet metal. However, since the springback phenomenon becomes larger with high strength metal such as AHSS, predicting the required MDF to produce the exact desired curvature in two directions is more difficult. In this study, a prediction model using artificial neural network (ANN) was developed to predict the springback that occurs during AHSS forming through MDF. In order to verify the validity of model, a fit test was performed and the results were compared with the conventional regression model. The data required for training was obtained through simulation, then further random sample data was created to verify the prediction performance. The predicted results were compared with the simulation results. As a result of this comparison, it was found that the prediction of our ANN based model was more accurate than regression analysis. If a sufficient amount of data is used in training, the ANN model can play a major role in reducing the forming cost of high-strength steels.

• Journal of Wetlands Research
• /
• v.3 no.2
• /
• pp.133-142
• /
• 2001

Growth of cities and an increase in population result in the development-oriented policy, urban streams to lose their natural characteristics and functions by channelization, parking lot construction, and so forth. The streams fall into urban drains, which is the current status of urban streams. Recently, the interest in the stream environment and the ecosystem has been increased, and the efforts have been made to improve the traditional maintenance program for small streams. These efforts lead to the application of the natural recovery systems. This study applied the 240-meter model reach along the Oncheon stream, which locates in Dongrae-gu, Busan city. to analyze the natural recovery system. The efficiency of each system has been analyzed and the future improvements for the systems are presented. The results show that the stream maintenance program should consider the ecological environment. thereby minimizing the environmental effects. When the changes are inevitable, the maintenance program should adopt the methods. which closely simulate the original environmental elements. or are more favorable to the ecosystem.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2116-2119
• /
• 2005

Inverted pendulum is a classical example and a famous tool for testing the effectiveness of many control schemes. Owing to their nonlinearity and unstable characteristic, a controller development either for swinging-up or stabilizing its upright position had been a great interest of many researchers. In this paper, the swinging-up control of the inverted pendulum using energy control will be presented. However, the saturation function in its control law could harm the experimental equipments. In addition, this swinging-up method did not consider limited sector of the arm angle to avoid another hazard, for instance, the twisted cable in the apparatus. Therefore, in this paper the position control of the arm angle using simple PD control in accordance with the energy control is proposed. Consequently, the limited arm sector angle can be achieved and the saturation function can also be replaced effectively by the PD control.

• Journal of The Korean Association of Information Education
• /
• v.22 no.2
• /
• pp.275-284
• /
• 2018

The purpose of this study is to improve career awareness of students by using visual thinking and SNS. In addition, parents' interest about their children 's career was increased, and career guidance suitable for the development stage of elementary school students' education was searched to find out the course appropriate for their aptitude and ability. The results of the comparative study showed that the experimental group had a significant effect on the opinions and attitudes toward career, information search and rational decision making, and knowledge on occupation. Research shows that career-based education using visual thinking and SNS has a positive effect of encouraging students' career awareness and positive attitude toward career search.

• The Research Journal of the Costume Culture
• /
• v.18 no.3
• /
• pp.514-525
• /
• 2010

In the rapidly changed 21st century when the flow speed of information is so fast and the quantity of information is too much increasing, personal appearance and characteristic image-formation is highly evaluated. Nowadays personal appearance is very essential to competition and may be considered the non-linguistic expression of self-image. The beauty action of the youth is shown to follow the object which youth want to rely on or long for and it is affected by the influence of the sociocultural elements. The purpose of this study is to identify the corelation between appearance and beauty action according to the sociocultural elements of the juveniles concerning appearance and to make an inquiry into how they pursue beauty in the restrictive bound compared with the adults. As their restrictive beauty action, the practical reflection percentage of hair-style, management of face, hand and nail control will be investigated and analyzed. Furthermore this basic material of this survey was used for the development of beauty article, cosmetics and education program. With the findings of the beauty articles in which the growing generation have a deep interest, this study provided the basic materials to the customer analysis and also the reference materials to the beauty marketing.

• International Journal of Internet, Broadcasting and Communication
• /
• v.5 no.2
• /
• pp.1-4
• /
• 2013

With the recent development of the ubiquitous computing technology, there are increasing interest and research in technologies such as sensors and RFID related to information recognition and location positioning in various ubiquitous fields. Especially, RTLS (Real-Time Locating Services) dealing with spatio-temporal data is emerging as a promising technology. For these reasons, the ISO/IEC published RTLS standard specification for compatibility and interoperability in RTLS. Therefore, in this paper, we designed and implemented Spatio-temporal Query Processing Systems for efficiently managing and searching the incoming Spatio-temporal data stream of moving objects. Spatio-temporal Query Processing Systems's spatio-temporal middleware maintains interoperability among heterogeneous devices and guarantees data integrity in query processing through real time processing of unceasing spatio-temporal data streams and two way synchronization of spatio-temporal DBMSs. Web Server uses the SOAP(Simple Object Access Protocol) message between client and server for interoperability and translates client's SOAP message into CQL(Continuous Query Language) of the spatio-temporal middleware.

• The Journal of Korean Association of Computer Education
• /
• v.3 no.2
• /
• pp.1-10
• /
• 2000

Humanity education is very important and essential part of education from the viewpoint of education. Further, it is valuable to utilize the advantages of computer system for systematic humanity education. In this paper, we designed and implemented Creativity Improving System(CIS) for improving student's creativity as an integrated component of Humanity Education System (HES) which will be developed in the near future. CIS is easy to maintain, repair and extend itself, since it is implemented based on Object-Oriented Development Method (OODM). By using 3-dimensional graphic technology, the contents of 3D-world in space is realistically expressed for improving the interest and effect of learning in the part of the maze game.

• International Commerce and Information Review
• /
• v.8 no.3
• /
• pp.229-255
• /
• 2006

The development of information technology got rid of much restriction on time and space, inviting earlier knowledge based society. The growing e-commerce based on internet alters the existing way of management in business groups and countries to one based on e-business. Especially, neighboring Far-East Asia countries are on the way of increasing their interest and efforts on e-commerce. Also they continue to give support to e-commerce and explore the way to North-East Asia e-Hub, on the government level. Against this backdrop, this study tried to review the current status and supporting system of e-commerce in 6 North-East Asia countries(South Korea, China, Japan, Taiwan, Hong Kong and Singapore), as a preliminary work for building the base of e-commerce and spurring the economic cooperation through e-commerce in North-East Asia region. I expect that this review would do the role of basic material for exploring and prospecting Korea's possibility as the North-East Asia e-Hub.