• Polymer(Korea)
• /
• v.33 no.4
• /
• pp.333-341
• /
• 2009

Polypropylene (PP)/functionalized multiwalled carbon nanotube (F-MWNT) nanocomposites were prepared by using solution intercalation method with different F-MWNT loads. The PP composite films, which contain dodecanol-MWNT (DDO-MWNT) or dodecylamine-MWNT (DDA-MWNT) as reinforcing additive, were evaluated by thermomechanical properties, morphology, electrical conductivity and gas permeability. The images from electron microscopy (SEM and TEM) showed that F-MWNTs were homogeneously dispersed in PP matrix, while they were agglomerated in some other part. The addition of F-MWNT could improve thermomechanical properties of the films. The maximum enhancement was observed at 2 wt% F-MWNT. DDO-MWNT was more effective than DDA-MWNT for both tensile modulus and optical transparency of the films.

• Journal of Adhesion and Interface
• /
• v.11 no.3
• /
• pp.106-111
• /
• 2010

Na-MMT intercalated with PEGMA macromer was prepared using an EtAc/acetone mixture (1/1 by volume) as a solvent. PEGMA/(Na-MMT)-co-MMA/MA nanocomposites was synthesized by copolymerizing intercalated compound with MMA and MA, and then characterization was performed. The results of X-ray diffraction (XRD) showed that in the case of Na-MMT intercalated with PEGMA macromer the d-spacings of silicate of Na-MMT increased with increasing of Na-MMT loading. As the Na-MMT loading increases Tg showed increasing trend through the DSC measurement. TGA result showed that thermal stability of PEGMA/(Na-MMT)-co-MMA/MA nanocomposites improved a little more than the pure PEGMA-co-MMA/MA.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.1
• /
• pp.1-8
• /
• 2004

This paper deals with the recent development of high-voltage cathode materials of mono- and di- metal ions substituted spinel $LiMn_2O_4$ for lithium batteries. $LiCu_xMn_{2-x}O_4(0{\leq}x{\leq}0.5)$ shows reversible intercalation/deintercalation in two potential regions, $3.9\~43\;and\;4.8-5.0V$ and stable electrochemical cycling behavior but with low capacity. $LiNi_{0.5}Mn_{1.5}O_4$ obtained by a sol-gel process delivers a capacity of 127mAh $g^{-1}$ on the first cycle and sustains a value of 124 mAh $g^{-1}$ even after the 60th cycle. The $Li_xCr_yMn_{2-y}O_4(0{\leq}x{\leq}0.5)$ solid-solutions exhibit enhanced specific capacity, larger average voltage, and improved cycling behaviors for low Cr content. $LiCr_yMn_{2-y}O_4$ presents a reversible Li deintercalation process at 4.9V, whose capacity is proportional to the Cr content in the range of $0.25{\leq}x{\leq}0.5$ and delivers higher capacities. $LiM_yCr_{0.5-y}Mn_{1.5}O_4(M=Fe\;or\;Al)$ shows that the capacity retention is lowered compared with lithium manganate. The cumulative capacities obtainable with Al-substitutted materials are less than those with Fe-substituted materials. $LiCr_xNi_{0.5-x}Mn_{1.5}O_4(x=0.1)$ delivers a high initial capacity of 1$152mAh\;g^{-1}$ with excellent cycleability.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.277-277
• /
• 2010

The capacity of the carbonaceous materials reached ca. $350\;mAhg^{-1}$ which is close to theorestical value of the carbon intercalation composition $LiC_6$, resulting in a relatively low volumetric Li capacity. Notwithstanding the capacities of carbon, it will not adjust well to the need so future devices. Silicon shows the highest gravimetric capacities (up to $4000\;mAhg^{-1}$ for $Li_{21}Si_5$). Although Si is the most promising of the next generation anodes, it undergoes a large volume change during lithium insertion and extraction. It results in pulverization of the Si and loss of electrical contact between the Si and the current collector during the lithiation and delithiation. Thus, its capacity fades rapidly during cycling. We focused on electrode materials in the multiphase form which were composed of two metal compounds to reduce the volume change in material design. A combination of electrochemically amorphous active material in an inert matrix (Si-M) has been investigated for use as negative electrode materials in lithium ion batteries. The matrix composited of Si-M alloys system that; active material (Si)-inactive material (M) with Li; M is a transition metal that does not alloy with Li with Li such as Ti, V or Mo. We fabricated and tested a broad range of Si-M compositions. The electrodes were sputter-deposited on rough Cu foil. Electrochemical, structural, and compositional characterization was performed using various techniques. The structure of Si-M alloys was investigated using X-ray Diffractometer (XRD) and transmission electron microscopy (TEM). Surface morphologies of the electrodes are observed using a field emission scanning electron microscopy (FESEM). The electrochemical properties of the electrodes are studied using the cycling test and electrochemical impedance spectroscopy (EIS). It is found that the capacity is strongly dependent on Si content and cycle retention is also changed according to M contents. It may be beneficial to find materials with high capacity, low irreversible capacity and that do not pulverize, and that combine Si-M to improve capacity retention.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.80-80
• /
• 2010

Graphene has attracted tremendous attention for the last a few years due to it fascinating electrical, mechanical, and chemical properties. Up to now, several methods have been developed exclusively to prepare graphene, which include micromechanical cleavage, polycrystalline Ni employing chemical vapor deposition technique, solvent thermal reaction, thermal desorption of Si from SiC substrates, chemical routes via graphite intercalation compounds or graphite oxide. In particular, polycrystalline Ni foil and conventional chemical vapor deposition system have been widely used for synthesis of large-area graphene. [1-3] In this study, synthesis of mono-layer graphene on a Ni foil, the mixing ratio of hydrocarbon ($CH_4$) gas to hydrogen gas, microwave power, and growth time were systemically optimized. It is possible to synthesize a graphene at relatively lower temperature ($500^{\circ}C$) than those (${\sim}1000^{\circ}C$) of previous results. Also, we could control the number of graphene according to the growth conditions. The structural features such as surface morphology, crystallinity and number of layer were investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM), transmission electron microscopy (TEM) and resonant Raman spectroscopy with 514 nm excitation wavelength. We believe that our approach for the synthesis of mono-layer graphene may be potentially useful for the development of many electronic devices.

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.212-216
• /
• 2005

Benzotriazole which is used as a corrosion inhibitor for the zinc coated steel was intercalated into Na-MMT. X-ray diffraction experiments on intercalant/silicate composite samples demonstrated that the intercalation of intercalant leads to an increase in the spacing between silicate layers. Water soluble poly(ethylene-co-acrylic acid) (PEA) nanocomposites, to use as a coating agent, were prepared with these modified MMT. We found that mono-layered silicates were dispersed in PEA matrix and those resultants were exfoliated nanocomposites. From the result of salt spray test, we found that this coating agent prepared with water soluble poly(ethylene-co-acrylic acid) (PEA) nanocomposite provided good corrosion protection. These results were caused by decreasing the rate of oxygen permeation from silicate layers dispersed homogeneously in PEA matrix and the effect of corrosion inhibitor from benzotriazole.

• Archives of Pharmacal Research
• /
• v.18 no.2
• /
• pp.84-89
• /
• 1995

The complexation and physical characteristics of egg phosphatidylcholine (PC) liposome containing amphotericin B(AmB) were investigated through circular dichrosim(CD) spectra, the size distribution, the turbidity change, and the calcein release. CD spectra of AmB-containing egg PC mxture exhibited a positive peak around 330 nm indicative of complexation of AmB and four negative peaks. The positive peak increased up to $2.2{\;}millidegree/{\mu}g$ AmB as AmB contents increased up to 12% (w/w), suggesting that AmB-phospholipid complexation was promoted by the antibiotics. The effective diameter of liposomesa by dynamic light scattering decreased from 450 nm to 220 nm as the amount of AmB in liposomes increased from o to 30% (w/w). The complexation may be responsible for the reduction in size. On the other hand, at around 1 mN deoxycholate (DOC), the reltive turbidities of 5 and 10% (w/w) AmB-containing liposome suspension were less than 1 probably due to the soblubilization of the complex, while those of pure PC liposome suspension were larger than 1 at the same concentration. Deoxycholate-induced release of liposomes, indicating the intercalation of the drug into the bilayers. Therefore, it is concluded that in AmB/eggPC/water system, AmB-phospholipid complexcoexists with AmB-containing liposomes.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.1
• /
• pp.39-44
• /
• 1998

$LiCoO_2$ powder was synthesized in an aqueous solution by a sol-gel method and used as a cathode active material for a lithium ion rechargeable battery. The layered $LiCoO_2$ powders were prepared by igniting in air for 12 hrs at 600 ℃ $(600-LiCoO_2)$ and 850 ℃ $(850-LiCoO_2)$. The structure of the $LiCoO_2$ powder was assigned to the space group R bar 3 m (lattice parameters a=2.814 Å and c=14.04Å). The SEM pictures of $600-LiCoO_2$ revealed homogeneous and fine particles of about 1 μm in diameter. Cyclic voltammograms (CVs) of $600-LiCoO_2$ electrode displayed a set of redox peaks at 3.80/4.05 V due to the intercalation/deintercalation of the lithium ions into/out of the $LiCoO_2$ structure. CVs for the $850-LiCoO_2$ electrode had a major set of redox peaks at 3.88/4.13 V, and two small set of redox peaks at 4.18/4.42 V and 4.05/4.25 V due to phase transitions. The initial charge-discharge capacity was 156-132 mAh/g for the $600-LiCoO_2$ electrode and 158-131 mAh/g for the $850-LiCoO_2$ electrode at the current density of 0.2 mA/cm2. The cycleability of the cell consisting of the $600-LiCoO_2$ electrode was better than that of the $850-LiCoO_2$. The diffusion coefficient of the $Li^+$ ion in the $600-LiCoO_2$ electrode was calculated as $4.6{\times}10^{-8}\; cm^2/sec$.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.9
• /
• pp.916-922
• /
• 1997

A superconducting phase La2CuO4+δ (Tc=44 K) has been prepared by electrochemical oxidation which allows the oxygen to intercalat into the La2O2 layers. According to the Cu K-edge X-ray absorption near edge structure spectroscopic analysis, the oxidized phase shows an overall spectra shift of about 0.5 eV to a higher energy region compared to the as sintered one with the occurrence of an additional peak corresponding to the transition to the |1s13dn+1L-14pσ1 > final state, indicating the oxidation of CuO2 layer. From the X-ray photoelectron spectroscopic studies, it is found that the binding energy of La 3d5/2 is significantly shifted from 834.3 eV (as sintered La2CuO4) to 833.6 eV (as electrochemically oxidized La2CuO4+δ), implying that the covalency of the (La-O) bond is decreased due to the oxygen intercalation. The O 1s spectra do not provide an evidence of the superoxide or peroxide, but the oxide (O2-) with the contaminated carbonate (CO32-) based on the peaks at 529 eV and 532 eV, respectively, which is clearly confirmed by the Auger spectroscopic analysis. Oxygen contents determined by iodometric titration (δ=0.07) and thermogravimetry (δ=0.09) show good coincidence each other, also giving an evidence for the "O2-" nature of excess oxygen. From the above results, it is concluded that "O2-" appeared as O 1s peak at 528.6 eV is responsible for superconductivity of La2CuO4+δ.

• Journal of Adhesion and Interface
• /
• v.4 no.4
• /
• pp.15-21
• /
• 2003

Polysulfone/organophilic layered silicate nanocomposites were prepared in the range of 0.25 to 9 wt% of organophilic-layered silicate by solution blend. Nano-hybridized films were cast from the blend solution. Exfoliation and intercalation of the polysulfone/organophiliclayered silicate nanocomposite films were confirmed by an X-ray diffractometer and a transmission electron microscope. Surface morphologies of polysulfone/organophilic layered silicate nanocomposite films were determined by a scanning electronic microscope and an atomic force microscope. When the organophilic layered silicate was added more than 1.5 wt%, the surface roughness (RMS) was rapidly increased because clusters of intercalated organophilic layered silicate particles existed on the polysulfone/organophilic-layered silicate film surface. Surface tension revealed an upward tendency over the contents of 1.5 wt% organophilic layered silicate in polysulfone/organophilic layered silicate nanocomposite. The change of surface morphology in polysulfone/organophilic layered silicate nanocomposite were affected by nano scale dispersed and intercalated organophilic layered silicate particles.