• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.4
• /
• pp.1-15
• /
• 2017

Eutrophication of surface waters is of concern worldwide, because it can result in many undesirable water-quality and ecological problems, such as hypoxic 'dead' zones and harmful algal blooms, both associated with considerable economic costs. In this study, we used LSM (Land Surface Model) to simulate nitrogen in five major rivers in the Southern Korean Peninsula. The main objective of this research was to enhance nitrogen data for input of LM3V model in South Korea. Input data for nitrogen fluxes were categorized into three sections including agriculture fertilizer, livestock manure, atmosphere deposition, biological fixation, and sewage pollutants were used as the nitrogen input. For using LM3V model, the nitrogen input data were regenerated by considering states of agriculture and industry in South Korea at a $1/8^{\circ}$ resolution. Then, we simulated stream/river flows and N loads throughout the entire drainage networks in South Korea at a $1/8^{\circ}$ resolution. By using the same parameters for the entire country ($100,210km^2$), composed of 5 river basins with varying climate and land use, the model simulates spatial (11 sites) and temporal (1999~2010) patterns of flows and nitrate-N loads are resonable by comparing observed flow and nitrate-N loads. The r (Pearson's linear correlation) for water temperature, flow and nitrate-N at river were 080~0.93, 0.62~0.92 and 0.5~0.9 respectively. Based on enhanced N input data and model results, we find that LM3V model as land surface model can be applied in South Korea with interaction of atmosphere and land conditions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.8
• /
• pp.641-648
• /
• 2016

In this study, the effect of injection nozzle shape on the supersonic film cooling performance is analyzed using CFD. The design parameters are inside and outside angles of upper plate of nozzle and nozzle tip thickness. It is observed that the mass flow rate of film cooling decreases with increase of inside angle, while the effect of the change of mass flow rate on the film cooling effectiveness is relatively small. In addition, cooling performance is generally reduced, except ahead of the local region where shock wave interaction with film cooling occurs, in accordance with the growth of the outside angle and tip thickness. In this paper, the CFD simulation is performed using a commercial software, ANSYS Fluent V15.0, and the CFD model is validated by comparing it with the experimental data shown in preceding research.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.2
• /
• pp.246-252
• /
• 2016

In this study, conceptual design of the fore-body hull form of catamaran type dredging vessel was performed that can effectively remove the contaminated sediments in coastal seabed. The hull form was simpled for the easy hull construction and the resistance performance was investigated to find out the effect of hull form parameters between variation of waterline and angle of entrance, etc. The relation between resistance performance and characteristics of free surface flows according to variation of bow forms was investigated by model testing in the circulating water channel and using Ansys CFX. The improvement of ship resistance performance to the wave resistance decrease due to improved wave pattern has been verified according to move the stem and the volume of the shoulder to the fore part of the vessel.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.8
• /
• pp.1263-1272
• /
• 1999

The effects of carnitine in diets with or without added fat (5% lard or soybean oil) were evaluated in 72 Large White ${\times}$ Landrace ${\times}$ Duroc pigs weaned at 35 days of age. Pigs were fed a 1.30% lysine corn-soybean basal diet+15% dried whey+4% fish meal with carnitine at 0 or 50 mg/kg and either 0% added fat, 5% soybean oil or 5% lard for 6 weeks in a $2{\times}3$ factorial trial (6 treatments, 3 pens per treatment, 4 pigs per pen). Addition of carnitine increased average daily gain (ADG) and average daily feed intake (ADFI) in the second two weeks of the six-week trial and overall, but had no significant effect on feed per gain (F/G). Lard alone depressed ADG (p<0.05) in the last two weeks of the trial and overall, but the ADG for pigs fed lard+carnitine was similar to the control. Lard reduced feed intake in the first two weeks of the trial (p<0.05). Carnitine reduced the percentage of pigs with poor (ADG<375 g/d) growth (15 vs 40%; p<0.05). The greater uniformity of growth was most evident in low-weaning-weight pigs in the second period (16 vs 62%, p<0.005). Addition of fat did not produce any positive effect on uniformity and had no interaction with carnitine on uniformity. Carnitine addition increased serum total carnitione and short-chain acyl-carnitine levels (p<0.05), but did not modify free carnitine levels. Serum carnitine levels were lower at weaning than at 14, 28, or 39 days after weaning (p<0.05). Carnitine increased serum protein levels on day 14 (p<0.05). Addition of fat in the form of soybean oil or lard did not improve piglet growth performance. Addition of 50 mg/kg of carnitine to the diet of weanling pigs enhanced postweaning performance.

• Architectural research
• /
• v.19 no.3
• /
• pp.79-87
• /
• 2017

In earthquake engineering, dynamic analyses are usually conducted by using a nonlinear analytical model of the entire building in order to identify the performance against earthquakes. At the same time, a large number of dynamic analyses are required to consider uncertainties on analytical models and ground motions. Therefore, it is necessary for the analytical model to be adequate, that is to say, the runtime should not be too long as the entire building is modeled to be in much detail, or the nonlinear model should not yield outputs very far from the actual ones by excluding important behaviors too much. The analytical model is usually developed based on experimental results, which have been already conducted for reinforced concrete columns with relaxed details. Therefore, this study aimed at making analytical models to be able to simulate the hysteretic behavior of the columns simply and easily. The analytical model utilizes a lumped hinge model to represent nonlinear moment-rotation hysteretic behavior of RC columns, which is feasible for nonlinear dynamic analyses usually conducted in earthquake engineering and for matching the analytical model to test results. For the analytical model, elements and material models provided by OpenSees are utilized. The analytical model can define the envelope curve, pinching, and unloading stiffness deterioration, but shortcoming of this model is not to be able to consider axial force-moment interaction directly and to simulate strength deterioration after post-capping completely. However, the analytical model can still represent test results well by considering that the goal of this study is to propose a general way to represent the hysteretic behavior of RC columns with relaxed details, not to provide parameters for a refined hysteretic model that can be just applied case by case.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.5
• /
• pp.273-278
• /
• 2011

The aim of this study was to investigate the effect of efonidipine on the pharmacokinetics of warfarin after oral and intravenous administration of warfarin in rats. Warfarin was administered orally (0.2 mg/kg) or intravenously (0.05 mg/kg) without or with oral administration of efonidipine (1 or 3 mg/kg) in rats. The effect of efonidipine on the cytochrome P450 (CYP) 3A4 activity was also evaluated. Efonidipine inhibited CYP3A4 enzyme activity with 50% inhibition concentration ($IC_{50}$) of $0.08{\mu}M$. Compared to those in the oral control group (warfarin without efonidipine), the area under the plasma concentration-time curve (AUC) of warfarin was significantly greater (1 mg/kg, P<0.05; 3 mg/kg, P<0.01) by 25.9-59.0%, and the peak plasma concentration ($C_{max}$) was significantly higher (3 mg/kg, P<0.05) by 26.2% after oral administration of warfarin with efonidipine, respectively. The total body clearance of warfarin was significantly (3 mg/kg, P<0.05) decreased by efonidifine. Consequently, the relative bioavailability of warfarin was increased by 1.26- to 1.59-fold and the absolute bioavailability of warfarin with efonidipine was significantly greater by 59.7-75.4 % compared to that in the control group (47.4%). In contrast, efonidipine had no effect on any pharmacokinetic parameters of warfarin given intravenously. Therefore, the enhanced oral bioavailability of warfarin may be due to inhibition of CYP 3A4-mediated metabolism in the intestine and/or liver and to reduction of total body celarance rather than renal elimination, resulting in reducing first-pass metabolism by efonidipine.

• Environmental Analysis Health and Toxicology
• /
• v.14 no.4
• /
• pp.145-153
• /
• 1999

Effects of various concentrations of copper in solid fibrous form and methylglyoxal (MG) on phosphorus uptake and growth change of green algae Scenedesmus obliquus were studied. There was significant differences among cultures treated with various concentrations of copper and MG in growth of algae with parameters of cell numbers, photosynthetic rate and cellular morphology, and phosphorus uptake by cell. When the copper in media is treated with 25 mg or 50 mg per 100 ml of Bristol solution, the mean cell number of algae was 15.642${\times}$10$\^$6/ cells$.$ml$\^$-1/ and 12.986${\times}$10$\^$6/ cells$.$ml$\^$-1/, respectively, while those of algae in culture without copper was 18.486${\times}$10$\^$6/ cells$.$ml$\^$-1/. The mean cell area of 2450 ${\mu}$m$^2$, 1894 ${\mu}$m$^2$and 1697 ${\mu}$m$^2$in basic media, basic media with 25 mg of copper and basic media with 50 mg of copper was showed the inhibitory effect of copper on algal growth. The algal growth was stimulated by MG when the culture was treated with 25 mg of copper or without copper, while it was inhibited when the culture was treated with 50 mg of copper. It was considered that there was significant interaction between copper and MG on algal growth. The phosphorus concentration in algal medium treated with 25 mg or 50 mg of copper was 29.435 ppm and 26.224 ppm, respectively, while those of algae in culture without copper was 52.8 ppm, which shows that the application of copper in algal medium can prevent the availability of phosphorus to algal cell.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.2 no.3 s.6
• /
• pp.109-117
• /
• 2002

An analysis to allocate storage space for sediment accumulation during the economic life of the reservoir is required in the planning or design of a reservoir. This analysis has been the most difficult and tedious aspect to deal with reservoir sedimentation because of the interaction between the various parameters related to the hydraulics of flow, reservoir operating policy, inflowing sediment load. The approach to analyzing spatial distribution of deposits has relied on empirical methods, all of which required a great deal of simplification from the actual physical phenomena. For the purpose of this study, reservoir sedimentation rate computed by Empirical Area Reduction Method is compared with measuring rate along the Soyang-gang Dam. As a conclusion, reservoir sedimentation rate can be estimated exactly by Empirical Area Reduction Method.

• Journal of KIISE:Information Networking
• /
• v.27 no.1
• /
• pp.76-87
• /
• 2000

ATM is a key technology of integration of multimedia service. Recently, Many study have been concentrated on performance testing for evaluation network performance are stronger everyday. The performance testing is on evaluation of maximal throughput of network by measuring and analyzing of various performance parameters. There are two ways to test ATM network performance; one is using QoS in cell level on the point of network's view, and the other is using metric in frame level in the point of user's view. And, the standardization process is also under way. In this paper, we derive a performance requirement of TCP in TCP/IP data transmission over ATM UBR service. By applying the derived requirements to ATM and packet networks, we evaluate the performance of TCP over UBR based on the result of our simulations. Therefore, we evaluate the result of simulation and find degradation of network throughput by interaction between TCP congestion control and ATM cell drop policy. So we suggest the accelerated Vegas that modify traditional TCP Vegas in congestion control mechanism for batter network throughput.

• Environmental Engineering Research
• /
• v.21 no.2
• /
• pp.196-202
• /
• 2016

Membrane bioreactor (MBR) technology has previously been used by water industry to treat high salinity wastewater. In this study, an anoxic-oxic biofilm-membrane bioreactor (AOB-MBR) system has been developed to treat mustard tuber wastewater of 10% salinity (calculated as NaCl). To figure out the effects of operating conditions of the AOB-MBR on membrane fouling rate ($K_V$), response surface methodology was used to evaluate the interaction effect of the three key operational parameters, namely time interval for pump (t), aeration intensity ($U_{Gr}$) and transmembrane pressure (TMP). The optimal condition for lowest membrane fouling rate ($K_V$) was obtained: time interval was 4.0 min, aeration intensity was $14.6 m^3/(m^2{\cdot}h)$ and transmembrane pressure was 19.0 kPa. And under this condition, the treatment efficiency with different influent loads, i.e. 1.0, 1.9 and $3.3kgCODm^{-3}d^{-1}$ was researched. When the reactor influent load was less than $1.9kgCODm^{-3}d^{-1}$, the effluent could meet the third discharge standard of "Integrated Wastewater Discharge Standard". This study suggests that the model fitted by response surface methodology can predict accurately membrane fouling rate within the specified design space. And it is feasible to apply the AOB-MBR in the pickled mustard tuber factory, achieving satisfying effluent quality.