• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1213-1237
• /
• 2019

Vehicular Ad-hoc Network (VANET) facilities envision future Intelligent Transporting Systems (ITSs) by providing inter-vehicle communication for metrics such as road surveillance, traffic information, and road condition. In recent years, vehicle manufacturers, researchers and academicians have devoted significant attention to vehicular communication technology because of its highly dynamic connectivity and self-organized, decentralized networking characteristics. However, due to VANET's high mobility, dynamic network topology and low communication coverage, dissemination of large data packets (e.g. multimedia content) is challenging. Clustering enhances network performance by maintaining communication link stability, sharing network resources and efficiently using bandwidth among nodes. This paper proposes a mobility-based, multi-hop clustering algorithm, (MBCA) for multimedia content broadcasting over an IEEE 802.11p-LTE-enabled hybrid VANET architecture. The OMNeT++ network simulator and a SUMO traffic generator are used to simulate a network scenario. The simulation results indicate that the proposed clustering algorithm over a hybrid VANET architecture improves the overall network stability and performance, resulting in an overall 20% increased cluster head duration, 20% increased cluster member duration, lower cluster overhead, 15% improved data packet delivery ratio and lower network delay from the referenced schemes [46], [47] and [50] during multimedia content dissemination over VANET.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1238-1259
• /
• 2019

Saving energy is a big challenge for Wireless Sensor Networks (WSNs), which becomes even more critical in large-scale WSNs. Most energy waste is communication related, such as collision, overhearing and idle listening, so the schedule-based access which can avoid these wastes is preferred for WSNs. On the other hand, clustering technique is considered as the most promising solution for topology management in WSNs. Hence, providing interference-free clustering is vital for WSNs, especially for large-scale WSNs. However, schedule management in cluster-based networks is never a trivial work, since it requires inter-cluster cooperation. In this paper, we propose a clustering method, called Interference-Free Clustering Protocol (IFCP), to partition a WSN into interference-free clusters, making timeslot management much easier to achieve. Moreover, we model the clustering problem as a multi-objective optimization issue and use non-dominated sorting genetic algorithm II to solve it. Our proposal is finally compared with two adaptive clustering methods, HEED-CSMA and HEED-BMA, demonstrating that it achieves the good performance in terms of delay, packet delivery ratio, and energy consumption.

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.89-98
• /
• 2010

In the heterogeneous system of various wired or wireless network with IP-based backbone, the continuities of agreedon QoS for multimedia services should be guaranteed regardless of network types and terminal mobility through seamless vertical handover. This paper proposes a QoS provisioning mechanism called D-ISHO which guarantees the continuities of agreed-on QoS and seamless for multimedia services by considering both such characteristics as delay, loss rate and jitter per each service and such status as available band-width, call arrival rate and data transmission rate during the vertical handover. Simulation is done for performance analysis with the measure of handover failure rate and packet loss rate.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.903-909
• /
• 2010

ADAS is the air defense control system performing air surveillance and identification of ROK and near air. This system is self-developed by Air Force, currently operated successfully as the alternative system of MCRC. ADAS processes converting and combining transferred the real time radar data detected by radars. additionally, it displays significant radar data as producing in tracks. Then, it uses the message queue for IPC(Inter Process Communication). the various tactical data processed in the server is ultimately send to the network management process through the message queue for transmitting to the weapon director console. the weapon director receives this transmitted tactical data through the console to execute air defense operations. However, there is a problem that data packet is delayed or lost since the weapon Director does not receive as the amount of tactical data from the server overflowed with air tracks and missions increased. This paper improved the algorism to display and transmit the various tactical data processed from ADAS server to numbers of the weapon director console in the real time without any delay or lost. Improved the algorism, established at exercise, the development server in the real operation network and the weapon director console, is proved by comparing the number of sending tactical data packets in the server and receiving packets in the weapon director.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5338-5359
• /
• 2017

In-band full-duplex (IBFD) wireless communication supports symmetric dual transmission between two nodes and asymmetric dual transmission among three nodes, which allows improved throughput for distributed IBFD wireless networks. However, inter-node interference (INI) can affect desired packet reception in the downlink of three-node topology. The current Half-duplex (HD) medium access control (MAC) mechanism RTS/CTS is unable to establish an asymmetric dual link and consequently to suppress INI. In this paper, we propose a medium access control mechanism for use in distributed IBFD wireless networks, FD-DMAC (Full-Duplex Distributed MAC). In this approach, communication nodes only require single channel access to establish symmetric or asymmetric dual link, and we fully consider the two transmission modes of asymmetric dual link. Through FD-DMAC medium access, the neighbors of communication nodes can clearly know network transmission status, which will provide other opportunities of asymmetric IBFD dual communication and solve hidden node problem. Additionally, we leverage FD-DMAC to transmit received power information. This approach can assist communication nodes to adjust transmit powers and suppress INI. Finally, we give a theoretical analysis of network performance using a discrete-time Markov model. The numerical results show that FD-DMAC achieves a significant improvement over RTS/CTS in terms of throughput and delay.

• Journal of KIISE:Information Networking
• /
• v.32 no.4
• /
• pp.508-514
• /
• 2005

The research in internetworking between UMTS and WLAN, which is completed with merits and demerits, Is actively progressed to establish global roaming environments. This internetworking is classified into two groups: loosely-coupled and tightly-coupled. h tightly-coupled mechanism demands lots of investment and considerable amountof time to construct, which is directly connoted between UNTS and WLAN via IWU. On the other hand, a tersely-coupled mechanism is more scalable and easier to implement than a tightly-coupled one while it has critical drawbacks of packet loss and blocking of services due to handover delay. To alleviate these drawbacks. this work proposes a handover scheme between UMTS and WLAN, which is based on HMIPv6. The performance of the proposed scheme is evaluated by the simaulation. The proposed internetworking scheme based on HMIPv6 shows hotter performance than those based on MIPv6.

• Journal of Convergence Society for SMB
• /
• v.6 no.4
• /
• pp.59-64
• /
• 2016

6LoWPAN (IPv6 over Low Power Wireless Sensor Network) standardized by IETF does not support the mobility of wireless sensor nodes. Since the wireless sensor node, subject to a lot of constraints in the CPU, memory, a battery is not easy to apply to existing protocols such as Mobile IPv6. In this paper, we propose a novel mobility management architecture and methods to work with 6LoWPAN based on the analysis on FPMIPv6 (Fast PMIPv6) the host is not a handover procedure performed in order to support the mobility of such sensor nodes. It was suggested the use of a dispatch code pattern that is not currently used in 6LoWPAN for inter-working, MAG and MAC, MAC in order to reduce packet loss caused as the authentication delay in the handover process to minimize the power consumption of a sensor node that is caused by the re-transmission the new concept of temporary guarantee (temporary guarantee) and trust relationships (trust relationship) between AAA and introduced.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.9
• /
• pp.1017-1024
• /
• 2004

In this paper, we propose the progressed interworking method between H.323 and SlP, then explain the improved property. The VolP(Voice over Internet Protocol) technology which is able to use a voice service through internet is more cheaper then existing telephone charges, and is easil)· accept the various of multimedia services from internet. Previous connectionmethod of VoIP used H.323 protocol, but it is very complex to connection establishment. so, the SIP(Session Initiation Protocol) protocol that propose in SIP-Working Group is in use recently. Therefore, we need new interworking methodology between H.323 and SIP Products. In this thesis, the progress interworking method between H.323 and SIP are Propose, then interpret unnecessary packet delay for call setup and improved feature of message exchange.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.3
• /
• pp.19-27
• /
• 2011

Due to the growth of optical fiber network technologies, most networks recently support several tens of Gb/s bandwidth. UDT(UDP-based Data Transfer protocol) is an optimized protocol for bulk data transmission on the network, which has the high bandwidth and long delay time. It periodically controls the sending rate on the fixed sync-interval, 0.01 sec. Here, if the network traffic status varies quickly, available network bandwidth is not able to be properly utilized in-between the sync-intervals. In this paper, we propose an adaptive rate control method with considering the network traffic status in-between the sync-interval periods. The network traffic status is determined based on the RTT variances. With dividing the network status into four classes, the proposed method performs a new rate control by adjusting the inter-packet sending period for a corresponding class. As a simulation result, the proposed method improves the message delivery throughput as well as stability than that of the existing UDT Protocol.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.4
• /
• pp.1344-1367
• /
• 2014

Mobile traffic is increasing a masse because of the propagation of the Internet and the development of wireless mobile technology. Accordingly, the Network Local Mobility Management (NETLMM) working group [1] of the Internet Engineering Task Force (IETF) has standardized Proxy Mobile IPv6 (PMIPv6) [2] as a protocol for accomplishing the transmissibility of mobile terminals. PMIPv6 is a network-led IP-based mobility management protocol, which can control terminal mobility without depending on the type of access system or the capability of the terminal. By combining PMIPv6 and the mobility of Session Initiation Protocol (SIP), we can establish terminal mobility and session mobility through a more effective route. The mobility function can be improved and the overlap of function reduced as compared to that in the case of independent operation. PMIPv6 is appropriate for a non-real-time service using TCP, and SIP is appropriate for a real-time service using RTP/UDP. Thus, in the case of a terminal using both services, an effective mobility management is possible only by using PMIPv6 together with SIP. In order to manage mobility in this manner, researches on PMIPv6-SIP are in progress. In line with this trend, this paper suggests a new PMIPv6-SIP architecture where when a mobile terminal conducts a handover, a network-led handover while maintaining the session without the addition of a special function or middleware is possible along with effective performance evaluation through mathematical modeling by comparing the delay and the packet loss that occur during the handover to the Pure-SIP.