• 한국조경학회지
• /
• 제32권6호
• /
• pp.82-94
• /
• 2005

This study was undertaken to measure and analyze the thermal environment characteristics of the grey permeable cement concrete pavement(GPCCP), the permeable cement concrete brick pavement(PCCBP) compared with impermeable cement concrete pavement(ICCP) and bare soil(BS) under the summer outdoor environment. Following is a summary of major results. 1) The peak surface temperature was greatest in the GPCCP$(54.2^{\circ}C)$ followed by ICCP$(47.2^{\circ}C)$ rut August 2, 2002, the hottest day$(35.3^{\circ}C\;of\;highest\;temperature)$ during the experiment; peak temperature in the ICCP and BS were $45.5^{\circ}C)$ and $45.3^{\circ}C)$ respectively. 2) Analysis of heat budget of the pavements has revealed that the heat environment was worse in the GPCCP than that in the ICCP and that this was mainly due to a low albedo in the former(0.2) relative to that of the latter(0.4). 3) Analysis of heat budget of the pavements has revealed that the heat environment was worse in the GPCCP than that in the PCCBP, BS and that this was mainly due to a decreased latent heat resulting from a time dependent decreasing impact of rainfall. 4) It is necessary to make cool pavements to further studies on light-colored surface materials for attaining high albdo and construction methods which can enhance the latent heat through the continuous evaporation from pavements surface. 5) Vertical arrangement of pavement layers has not been considered in the present study, which has been focuses on the heat characteristics of the surface layer materials. Accordingly, future studies will have to be empasized on pavement methods including the vertical arrangement of the pavement layers.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.169.1-169.1
• /
• 2010

Geothermal heat pump(GHP)system has been extensively disseminated due to the recent increasing demand over new and renewable energy. However, the economics and system reliability has been key issues and barriers to insure a better system performance as designed originally. The building integrated designs of geothermal heat pump system are test and optimize GHP system by evaluating its performance in virtual reality. System design is an iterative process that will help optimize the cost efficiency of the system. One of the primary goals is to minimize the energy imbalance between the amount of energy extracted from the ground and the energy reject to it. This will reduce the land area required to install the GHX, reduce the cost of installing it and ensure the long-term efficiency of the system. Commissioning is the process of ensuring that are designed, installed, functionally tested, and capable of being operated and maintained to performance in conformity with design intent. In this paper, Study on introduction of Initial commissioning method of Geothermal Heat Pump(GHP) system using ISO performance data has been introduced. Also KIER GHP Simulator is used to simulate actual heat pimp operating condition and test commissioning method. Result should that the experiment data base could verify the applicability of the commissioning method, and also were able to suggest a better ways to GHP commissioning.

• 대한가정학회지
• /
• 제20권1호
• /
• pp.65-77
• /
• 1982

The intent of this study was to focus attention on the relationship between curtain fabrics and consumer perceptions towards curtains and draperies. This study consisted of the laboratory test for thermal transmittance of selected fabrics and the exploratory survey for consumer perceptions towards curtains and draperies. The objectives of the laboratory test were to measure fabric's thermal transmittance, thickness, and count which affect to the effect in heat controlling. Selected 23 fabrics were tested at Korean Yarn and Fabrics Testing Inspection Institute. The objectives of the exploratory survey were to determine sociodemographic factors; the stage of family life cycle, the economics status, and homemaker's level of education, and physical factors; the type of houses, the direction of windows, and the type of windows, affect consumer perceptions toward curtains and draperies. Questionaires were administered to 489 homemakers selected by a stratified propotional sampling plan, in Seoul in October, 1981. Data from responses were analyzed by T-test(Analysis of Varience) and Partial Correlation. The major findings are as follows; 1. The results of the laboratory test 1) The fabrics used for draperies had higher effect in heat controlling than the fabrics used for glass curtains. 2) It did not show much differences among the fibers in heat controlling. The thicker fibers, however, had the higher effect in heat controlling among same fibers. 3) The fabrics which had high level of effect I heat controlling were corduroy, flax, rayon, nylon, acetate, thick polyester, and thick polyacrylic. The fabrics which had midium level of affect in heat controlling were velveteen, velvet, and thin polyester. The fabrics which had low level of effect in heat controlling were cotton, silk, and thin polyarcylic. 4) The draperies with lining showed 2∼5 times more effective in heat controlling than the draperies without lining. 2. The results of the exploratory survey Consumer perceptions towards curtains and draperies consisted of functional, financial, and aesthetic perception. 1) Factor affecting functional perception towards curtains and draperies was the stage of family life cycle. Families in the contracting stage considered function of curtains and draperies significantly better than those in others stages. 2) Factors affecting financial perception towards curtains and draperies were the economic status, homemaker's level of education, the direction of windows, and the type of windows. However the correlation between the factors and financial perception was too low to explain the significance of tendency. 3) There was not any factors affecting aesthetic perception towards curtains and draperies.

• Journal of the Korean Data and Information Science Society
• /
• 제24권3호
• /
• pp.515-521
• /
• 2013

건강 관리에 있어서 서양의학과 한의학의 접근 방법의 차이는 자연과 인간의 이해에 대한 문화적인 차이에서 비롯된다. 서양의학에서는 자연과 인간을 분리하고 인간 또한 여러 하위 시스템으로 나누고, 질병을 외부의 자극에 대한 반응이 적절하지 못하여 초래되는 것으로 보고 질병이 발생되면 시스템 별로 진단하여 치료해 왔다. 반면, 한의학의 경우 자연과 인간을 하나로 보고 인간의 건강을 자연과의 조화로운 상태로 규명하고 질병이 발생하기 전에 건강의 균형을 유지하기 위한 면역 기능을 높이는 예방적 치료를 주로 해왔다. 이러한 인간에 대한 근본적인 접근방법의 차이는 의료 전달체계를 양분화 시키고 상호 의사소통의 어려움을 야기했으나 통합 의료 서비스는 두 가지 의학의 장점을 살리고 최상의 치료 효과를 지향하는 시도라고 할 수 있다. 따라서 본 논문에서는 특정 질환인 황달에 대해 한의학적 분류 (습증, 열증)에 따른 서양의학에서 사용하는 혈액학적 검사수치를 통계적 분석기법을 사용하여 살펴보고 차이가 있는 수치를 살펴봄으로써 통합의료적 환자 진단과 치료에 적용할 수 있는 접근 방법을 살펴보고자 한다.

• 대한치과보철학회지
• /
• 제43권1호
• /
• pp.52-60
• /
• 2005

Purpose. The intent of this study was to evaluate the effects of curing conditions on self-curing denture base resins to find out proper condition in self-curing resin polymerization. Materials and methods, In this study, 3 commercial self-curing denture base resins are used Vertex SC, Tokuso Rebase and Jet Denture Repair Acrylic. After mixing the self curing resin, it was placed in a stainless steel mold(3$\times$6$\times$60mm). The mold containing the resin was placed under the following conditions: in air at 23$^{\circ}C$; or in water at 23$^{\circ}C$; or in water at 23$^{\circ}C$ under pressure(20psi); or in water at 37$^{\circ}C$ under pressure(20psi) or in water at 50$^{\circ}C$ under pressure(20psi) , or in water at 65$^{\circ}C$ under pressure(20psi), respectively. Also heat-curing denture base resin is polymerized according to manufactures' instructions as control. Fracture toughness was measured by a single edge notched beam(SENB) method. Notch about 3mm deep was carved at the center of the long axis of the specimen using a dental diamond disk driven by a dental micro engine. The flexural test was carried out at a crosshead speed 0.5mm/min and fracture surface were observed under measuring microscope. Results and conclusion . The results obtained were summarized as follows : 1. The fracture toughness value of self-curing denture base resins were relatively lower than that of heat-curing denture base resin. 2. In Vertex SC and Jet Denture Repair Acrylic, higher fracture toughness value was observed in the curing environment with pressure but in Tokuso Rebase, low fracture toughness value was observed but there was no statistical difference. 3. Higher fracture toughness value was observed in the curing environment with water than air but there was no statistical difference. 4. Raising the temperature in water showed the increase of fracture toughness.

• 한국화재소방학회논문지
• /
• 제20권3호
• /
• pp.65-70
• /
• 2006

원자력발전소의 화재방호규정은 발전소 건설 초기단계에서 인허가 요건에서 제시하는 설계기준을 따른다. 이러한 규정은 발전소 정상상태를 기준한 것이며 발전소 과도상태, 배열이 변경될 수 있는 계획예방정비기간 또는 발전소 해체기간의 화재방호 적용기준으로는 부족한 실정이다. 최근 미국에서 개발되고 있는 화재방호요건은 발전소 전체 수명기간에 걸쳐 성능기반 요건과 관리기준을 제시하고 있으나 발전소 상태 변경에 따른 정성적 및 정량적 평가를 위한 적용기준이라기 보다 개념적 적용방법을 제시하고 있다. 반면, 성능기반 화재위험 분석기법은 원전의 화재방호구역을 하나의 분석공간으로 설정한 다음 열 및 연기의 유동을 해석하며, 실내의 안전성 관련 기기 및 케이블에 대한 열적 영향을 평가한다. 본 논문에서는 이러한 새로운 정량적 분석기술을 국내 원전에 적용하기 위한 목적으로 원전 화재방호규정의 적용방법 변경 방안과 발전소 상태변경에 대한 위험도 평가 항목을 구분하여 제시하였다.