• 대한기계학회논문집B
• /
• 제20권1호
• /
• pp.244-254
• /
• 1996

Flow velocity was measured by, use of hot wire anemometer. Turbulence intensity was in proportion to mean flow velocity regardless of swirl velocity. And integral length scale has proportional relation with swirl velocity regardless of measurement position. Turbulent burning speed during flame propagation which was determined by flame photograph and gas pressure of combustion chamber was increased with the lapse of time from spark and was decreased a little at later combustion period. Because of combustion promotion effect, turbulent burning speed was increased according to increase of turbulence intensity. Burning speed ratio i.e. ratio of turbulent burning speed ($S_BT$) to laminar burning speed ($S_BL$) was found out by use of turbulence intensity u' and integral length scale $l_x$ , $\delta_L$ is width of preheat zone in laminar flame.

• BMB Reports
• /
• 제30권4호
• /
• pp.258-261
• /
• 1997

A simple quantitative assay method for ribonuclease activity has been developed. This method is based on the decrease of fluorescence intensity emitted by the ethidium bromide bound to RNA due to the degradation of RNA by ribonuclease. The substrate RNA was reacted with ribonuclease A and the fluorescence intensity was measured after the addition of ethidium bromide. The intensity difference was calculated using a blank reaction mixture containing no RNase. Whole cellular RNA substrate produced a significant error and was not suitable for this assay method possibly because of local microheterogeniety caused by high molecular weight rRNA. but satisfying results were obtained with tRNA substrate. The intensity difference increased linearly by raising enzyme concentration up to $2{\times}10^{-4}$ Kunitz Units of ribonuclease A. More refined and reliable results were obtained by use of initial reaction velocities which were calculated from the plots of intensity difference vs time. A linear relationship between initial velocities and enzyme concentrations was observed up to 0.01 Kunitz Units of enzyme.

• Asian Journal of Innovation and Policy
• /
• 제4권2호
• /
• pp.200-216
• /
• 2015

This paper empirically investigates the role of R&D intensity on market concentration of firms using four key market valuation variables, namely (1) market share, (2) labor intensity, (3) firm age and, (4) firm's market value. The empirical tests use database at firm level for the Indian IT sector from 1999 to 2013 from the CMIE Prowess database. The results of the regression analyses partially support our hypothesis that R&D intensity positively influences firm's market value measure by the H-index. The test results are consistent with the hypotheses that R&D spending is more valuable for firms with larger market shares, higher labor intensity, and firms that are diversified.

• International Journal of Automotive Technology
• /
• 제6권3호
• /
• pp.293-303
• /
• 2005

Bonded dissimilar materials are being increasingly used in automobiles, aircraft, rolling stocks, electronic devices and engineering structures. Bonded dissimilar materials have several material advantages over homogeneous materials such as high strength, high reliability, light weight and vibration reduction. Due to their increased use it is necessary to understand how these materials behave under stress conditions. One important area is the analysis of the stress intensity factors for interface cracks emanating from circular holes in bonded dissimilar materials. In this study, the bonded scarf joint is selected for analysis using a model which has comprehensive mixed-mode components. The stress intensity factors were determined by using the boundary element method (BEM) on the interface cracks. Variations of scarf angles and crack lengths emanating from a centered circular hole and an edged semicircular hole in the Al/Epoxy bonded scarf joints of dissimilar materials are computed. From these results, the stress intensity factor calculations are verified. In addition, the relationship between scarf angle variation and the effect by crack length and holes are discussed.

• 비파괴검사학회지
• /
• 제27권6호
• /
• pp.550-555
• /
• 2007

Stress intensity factor is one of the most important parameters in fracture mechanics. Both the stress field distribution and the crack propagation are closely related to these parameters. Due to the complexity of actual engineering problems, it is difficult to calculate the stress intensity factor by theoretical formulation, so photoelasticity method is a good choice. In this paper, modified two parameter method is employed to calculate stress intensity factor for opening mode by using data from more than one photoelastic fringe loop. For getting accurate experiment results, the initial fringes are doubled and sharpened by digital image programs from the fringe patterns obtained by a CCD camera. Photoelastic results are compared with those obtained by the use of empirical equation and FEM. Good agreement shows that the methods utilized in experiments are considerably reliable. The photoelastic experiment can be used for bench mark in theoretical study and other experiments.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.85-90
• /
• 2000

For more esthetic treatments the use of composite in molar areas are increasing. But polymerzation shrinkage that cause marginal leakage and cuspal deflection has been the problems of composites. The purpose of this study is to compare the effect of low intensity curing and polishing period on marginal leakage. Cavities were prepared on the buccal or lingual surface of forty five sound extracted human teeth and etching, application of bonding agent and filling of composite was done. Group 1 was light cured at intensity of 600$mW/cm^2$ for 41 seconds and polished. Group 2 was light cured at intensity of 300$mW/cm^2$ for 2 seconds and polished and after polishing it was light cured for 40 seconds at 600$mW/cm^2$. Group 3 was light cured at intensity of 300$mW/cm^2$ for 2 seconds and waited for 5 minutes and after curing at 600$mW/cm^2$ for 40 seconds polishing was done. The specimens were thermocycled at $5^{\circ}C$ and $55^{\circ}C$ for 1000 cycles and immersed in 2% methylene blue solution for 24 hours. Composite-tooth interface was examined under stereobinocular microscope for dye penetration. The results were as follows : 1. Group which were cured at low intensity and polished after curing at high intensity showed less marginal leakage than group which were cured at high intensity for 41 seconds(p<0.05). 2. Marginal leakage between group which were cured at low intensity and polished immediately and group which were cured at high intensity for 41 second were not significantly different. Light curing at low intensity can reduce marginal leakage but polishing immediately after curing at low intensity for short time can affect marginal leakage.

• 한국환경과학회지
• /
• 제16권11호
• /
• pp.1313-1318
• /
• 2007

Illicium anisatum was bred under four different light intensity. Those condition were full sunlight(PPFD $1600{\mu} mol\;m^{-2}s^{-1}$), 30% treatment(PPFD $400{\mu} mol\;m^{-2}s^{-1}$), 50% treatment(PPFD $250{\mu} mol\;m^{-2}s^{-1}$) and 70% treatment(PPFD $100{\mu} mol\;m^{-2}s^{-1}$), respectively. Chlorophyll a and b were increased according to decrease of light intensity. Thirty percent and 50% treatment had not significant different in chlorophyll a and b. Thirty percent treatment was shown the best photosynthetic activity through invested photosynthetic rate, intercellular $CO_2$ concentration and water use efficiency. Photosynthetic activity trend of 50% treatment was similar to 30% treatment. Seventy percent treatment was shown the best photosynthetic activity at low light intensity but that was decreased to lower value than 30% and 50% treatment under high intensity. Control, bred full sunlight, was shown the worst photosynthetic activity at measured all light intensity. That result could imply that was caused by photo-inhibition because of long term exposed of shade tolerant plant at high light intensity. Leaf characteristics had not significant different in leaf length, width and area but leaf dry weight had similar trend to photosynthetic activity.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.646-649
• /
• 2014

Performances of spectrum-sliced channels are strongly affected by their relative intensity noise (RIN). We use polarization-independent optical modulators (PIOMs) for spectrum-sliced channels to suppress their RIN. The PIOM driven by a high sinusoidal voltage signal evenly redistributes optical frequency components in the spectral domain and reduces the RIN. It can be used at a broadband light source (BLS) output to produce spectrum-sliced channels having lower RIN values. Also, it can be used for each spectrum-sliced channel within each optical network unit (ONU). In our experiment, where 12.5-GHz-spaced spectrum-sliced channels are used in 1-GbE speed, the use of PIOM at the BLS output reduces the bit error rate (BER) of the spectrum-sliced channel by more than an order of magnitude. The use of PIOM within the ONU reduces the BER by approximately 3 orders of magnitude.

• 국제물리치료학회지
• /
• 제12권1호
• /
• pp.2295-2301
• /
• 2021

Background: Physical therapy applied to stroke patients is recognized as a treatment that promotes function recovery, and it is a widely known fact that constant exercise should be performed. However, there are insufficient studies on exercise intensity and exercise time that can minimize side effects and maximize function recovery for exercise therapy. Objectives: To determine the effect of exercise variables on CPK generation during aerobic exercise in stroke patients and to discover how to use appropriate exercise intensity and time when conducting an exercise for function recovery in stroke patients. Design: Quasi-experimental research. Methods: This study classified subjects into three groups (low-intensity exercise group: LIE, moderate-intensity exercise group: MIE and high-intensity exercise group: HIE) according to exercise intensity, and was further classified into two groups (10-minute exercise group: 10MG and 20-minute exercise group: 20MG) according to exercise time variables within each exercise intensity group. After, the change in CPK according to exercise intensity and time was confirmed through hematological analysis. Results: In LIE and MIE, the CPK blood concentrations before and after exercise were increased in 10MG and 20MG, which was not statistically significant (P>.05). In HIE, the CPK blood concentrations before and after exercise were increased in 10MG, and it was statistically significant (P<.05). In HIE, the CPK blood concentrations before and after exercise were increased in 20MG, and it was statistically significant (P<.01). In 10MG and 20MG, the CPK blood concentrations before and after exercises were increased in all intensity group, and there was a statistically significant difference only in HIE. Conclusion: From the results of this study, considering CPK, it will be helpful to recover and improve function if the exercise intensity setting is applied in the type of moderate intensity exercise during physical therapy interventions in stroke patients.

• 한국환경과학회지
• /
• 제25권1호
• /
• pp.99-105
• /
• 2016

In this paper, a groundwater hydrological study of the Gyeongju well during the Silla period is conducted to investigate how sufficiently the Gyeongju well supplied water demand at the time. It is assumed that the current geology and soil condition in Gyeongju remain similar to the Silla period. Also, the land use and land coverage during the Silla period is estimated based on the current land condition in Gyeongju. Precipitation during the Silla period is analyzed using precipitation data from 1984 to 2014 provided by Gyeonju weather station. Precipitation analysis is applied based on 3 different scenarios; precipitation intensity during the Silla period was Case (1) the same as, Case (2) 30% more, and Case (3) 30% less than the precipitation intensity of the last decade (2005~2014). Furthermore, to observe the use of the well in Gyeongju during droughts, the following condition(Case (4)) is also considered; ten year drought during the Silla period was the same as the ten year drought from 1984 to 2014. Available amount of groundwater development is analyzed using NRCS-CN method. The results show that the potential amount of groundwater in Gyeongju during Silla era was for Case (1) $62,825,272m^3/year$, Case (2) $93,606,567m^3/year$, Case (3) $32,277,298m^3/year$, and Case (4)$32,870,896m^3/year$. Also, it has been shown that $45,260,000m^3$ of groundwater were required to supply to all households in Gyeongju during Silla era. Therefore, if the precipitation intensity during Silla era was similar with the last decade, the groundwater would provide enough supply to all households in Gyeongju. However, in the case that the precipitation intensity during Silla era was 30% less than the last decade or a ten year drought happened, it is predicted that the water use in Gyeongju would have been limited.