• 제목/요약/키워드: integration with buildings services

검색결과 6건 처리시간 0.018초

우리나라 사찰건축에서 봉불(奉佛)과 강설(講說)공간의 변화과정 (The Transition Process of Ritual(Worship)(奉佛) and Lecture(講說) Space in a Korean Buddhist Temple)

  • 홍병화
    • 건축역사연구
    • /
    • 제19권4호
    • /
    • pp.109-123
    • /
    • 2010
  • The main functions of a Buddhist temples are as a place for Buddhist services and a place for sermons and each ancient Buddhist temple was equipped with a main and separate building. After Zen Buddhism was first introduced, there was a tendency to change the terms to Buddhist sanctuary and altar, as set forth in the Zen Buddhism code of conduct called 'Cheonggyu(淸規)'. As such, it was thought that the division between Buddhist service space and preaching space were relatively firm until the Goryeo Dynasty. However in the period from the end of the Goryeo to the beginning of the Joseon Dynasty there was an increasing tendency of integration of the two buildings. It can be seen that, in cases where both buildings remained, statues of Buddha were enshrined in these buildings without any distinction. Eventually it is led to the tradition of duo-Buddhist sanctums.

Design of steel and composite beams with web openings - Verification using finite element method

  • Chung, K.F.;Ko, C.H.;Wang, A.J.
    • Steel and Composite Structures
    • /
    • 제5권2_3호
    • /
    • pp.203-233
    • /
    • 2005
  • This paper presents the findings of a design development project for perforated beams fully integrated with building services. A unified design approach for both steel and composite beams with large rectangular web openings is proposed which is based on plastic design methods and formulated in accordance with analytical structural design principles. Moreover, finite element models are established after careful calibration against test data, and comparison on the predicted ultimate loads of two composite beams with rectangular web openings from the finite element models and the proposed design method is also presented. It is demonstrated that the proposed design method is able to predict the ultimate loads of composite beams with rectangular web openings against 'Vierendeel' mechanism satisfactorily.

Mobile Edge Computing을 활용한 건물 재난 알림 시스템 구축 방안 (Mobile Edge Computing based Building Disaster Alert System Implementation)

  • 하태영;김준성;정종문
    • 인터넷정보학회논문지
    • /
    • 제18권4호
    • /
    • pp.35-42
    • /
    • 2017
  • 본 논문은 MEC (Mobile Edge Computing)기술을 이용하여 건물에 재난이 발생 하였을 때 건물 내 사람들에게 재난에 대해 알리는 건물재난 알림 시스템 구현 방안에 대하여 제안한다. MEC의 개요를 설명하고, MEC를 활용한 네트워크의 구조와 특성을 파악한다. 추가적으로 기업 통합 패턴기반의 Apache Camel의 특성을 파악하고, 이를 활용한 MEC 구현 방안에 대해서 설명한다. 마지막으로 Apache Camel 기반의 MEC를 활용하여 재난 발생시, 센서들을 통해 재난상황을 빠르게 인식하고, 건물 내 사람들을 신속하게 대피할 수 있도록 돕는 건물재난 알림 시스템 구현 방안을 제시한다.

Engineering of Guangzhou International Finance Centre

  • Kwok, Michael;Lee, Alexis
    • 국제초고층학회논문집
    • /
    • 제6권1호
    • /
    • pp.49-72
    • /
    • 2017
  • The Guangzhou International Finance Centre (IFC) is a landmark building that symbolizes the emerging international strength of Guangzhou, China's third largest city. It is also one of the dual iconic towers along the main axis of Guangzhou Zhujiang New Town. Arup adopted a total engineering approach in embracing sustainability and aiming at high efficiency solutions based on performance-based design principles covering structures, building services, fire engineering, vertical transportation, and façade performance to constitute an efficient and cost-effective overall building design. Through dynamic integration of architectural and engineering principles, Guangzhou IFC represents a pioneering supertall building in China. It adopts a diagrid exoskeleton structural form that is clearly expressed through the building's façade and gives the building its distinctive character. The aerodynamic shape of the building not only presents the aesthetic quality of elegant simplicity, but also reduces the effects of wind, thereby reducing the size and weight of the structure. State-of-the-art advanced engineering methods, such as optimization techniques and nonlinear finite element modelling, were applied in parallel with large-scale experimental programs to achieve an efficient and high-performance design taking into account the constructability and cost-effectiveness for a project of this scale.

빌딩 제어 및 관리 시스템 개발에 관한 연구 -조명 제어 관리 시스템 구축을 중심으로- (A Study on the Development of Building Control and management System -Focusing on the Lighting Control and Monitoring system-)

  • 조성오
    • 한국실내디자인학회논문집
    • /
    • 제16권4호
    • /
    • pp.110-118
    • /
    • 2007
  • Technology has been viewed at various stages of civilization as leading to future progress. The building, its services systems and management of the work process all contribute to the well-being of people within an organization. Productivity relies on there being a general sense of high morale and satisfaction with the workplace. Now buildings are considered as providing a milieu for human creativity. Flexibility, adaptability, service integration and high standards of finishes offer an intelligence threshold. Building Automation System(BAS) - controlled lighting systems may offer incremental energy saving. Conventional Lighting control systems often control equipment in a single room or over the limited area, because they are centralized control systems, which means that all the controlled circuits must be wired to a single control panel. The computers used by these systems are typically dedicated microprocess that perform only lighting control functions. By comparison, modern Building automation systems are distributed control system, which means that their computing hardware and software are distributed as a network that microprocessor-based control modules and standard PC. PLC(Programmable Logic controller) is extensible virtually without limits, so that all the lighting in a facility can be controlled by single, unified system - the same system that also can control and monitor the building's HVAC, security, and manufacturing processed, elevators, and more. A Building automation system can control light using schedules, manual controls, occupancy sensors, and photosensors, either singly or in combination. Building Lighting control and monitoring system will be for a energy saving and efficient building management system.

한국농촌지도사업(韓國農村指導事業)의 변동(變動) (Changes in Agricultural Extension Services in Korea)

  • 후지타야스키;이용환;김성수
    • 농촌지도와개발
    • /
    • 제7권1호
    • /
    • pp.155-166
    • /
    • 2000
  • 1994년 가을 한국을 방문하였을 때 놀란 것 온 도시 근교에 숲과 같이 세워진 고층 아파트 단지와 그 수요의 배경이 된 서울, 수원을 비롯한 수도권의 인구 집중이었다. 이러한 인구 집중을 가져온 것은 바로 제2차, 3차 산업의 발달이었다. 그 이후 6년만인 2000년 3월에 다시 농촌과 농촌지도사업의 변화 동향을 살펴보기 위하여 농가 방문, 도 농업기술원 및 시 ${\cdot}$ 군농업 기술센터를 방문하면서 더욱 진전된 아파트군과 도시 근교의 비닐 하우스 단지였으며, 이는 한국이 지속적인 경제 발전을 하고 있다는 한 증거였다. 한국은 1997년에 내습한 통화위기로 IMF의 구제 금융을 받게 되었고, 이로 인하여 한국 경제는 IMF의 관리하에 있었으나 1년만에 회복의 기미를 보이기 시작하였으며, 1999에는 GDP 성장률이 10.7%에 달하였다. 한국 정부는 이 시기에 구조개혁을 단행하여 금융, 기업, 노동, 공공의 각 부분에 개혁을 단행하였다. 특히 정부로서는 정부 조직을 개편하여 지방화, 행정 조직 인원의 삭감, 농업 예산의 축소하는 방향으로 나아갔고 공기업을 민영화하여 농업 단체의 통합, 각종 규제를 철폐하였다. 중앙 정부의 권력이 지방으로 많이 이양되어 시장, 군수 등의 권한이 크게 늘어났다. 농촌지도사업도 IMF 관리하의 정부 조직 개편 및 규제 완화의 대상이 되었다. 지금까지 중앙 정부 소속이었던 농촌지도 사업이 지방화의 영향으로 시 ${\cdot}$ 군으로 이관되었다. 이것에 동반하여 농촌지도소 수의 축소(64%), 지도 직원의 감원(24%), 사업 예산의 감소 등으로 나타났다. 이러한 개편 과정에서 농촌지도사업의 기본적인 방향을 정하는 것은 중앙의 농촌진흥청이 맡고 인사와 기술 개발, 지원은 도농업기술원, 사업운영 책임은 시 ${\cdot}$ 군에서 맡는 체제로 개편되었다. 시 ${\cdot}$ 군 단계의 농촌지도사업은 담당 기구가 농촌지도소에서 농업기술센터로 그 명칭이 변경되었고, 설치권자가 군수로 되었으며, 그 기능에 기술 개발 업무가 더해졌으며, 농촌지도사 및 생활지도사의 수가 크게 감소되었다. 최근에 한국의 농촌 및 농촌지도사업을 관찰한 결과, 이러한 중앙, 도 시 군의 지도 기능 분담이 그렇게 잘 인식되어 있는 것만은 아닌 면도 있는 것으로 보였다. 이러한 구조 개선을 계기로 해서 농촌의 현실을 반영한 실효성 있는 농촌진흥에 기여할 수 있는 농촌지도사업으로 재출발한다는 의의를 살릴 수 있도록 농촌진흥청은 농업기술센터의 동태를 철저하게 살피고 이와 관련한 도농업기술원의 대응을 파악하여 이를 기초로 기능을 발휘하도록 만들어야 할 것이다. 국가에서 이관된 현지의 농촌지도 거점인 농업기술센터에 관하여 농촌지도소가 개칭되어 농업기술센터가 되었고 조직적인 면에서도 기술개발과가 설치되었다. 이는 현지에서의 기술 개발이 가능하게 된 점과 현지에서 원하는 과제를 신속하게 대응하여 도와 국가의 시험연구 과제로 삼을 수 있게 된 것은 시험 연구 사업에서 크게 평가받을 만한 발전이라 할 것이다. 그러나, 농촌지도 직원이 다른 행정 업무도 겸무하여 될 경우 영농 환경을 좋게 하는 직접적인 행정에 관한 업무에서는 겸무하므로서 농가도 편리해지고, 보급지도의 효과도 촉진되는 경우가 있으나 검사, 취체 업무는 반드시 피해야 할 일이다. 동일인이 이것을 담당하게 되면 농가에게 안심감을 잃어버리고 보급 효과는 기대할 수 없게 될 것이다. 한국의 농촌지도사업의 보급 내용은 농업자재의 절약, 첨단농업기술의 개발, 이를 기반으로 수출농업의 촉진과 생산성 향상, 시장에 강한 농업의 구축 등에 힘을 쏟고 있는 것으로 보였다. 그러나 이러한 농업의 추구는 약탈농업을 추구하는 등 지속적 농업이 되지 않을 가능성이 높아지게 된다. 앞으로 지속적인 농업에 관하여 보다 더 많은 관심을 기울여야 할 것이다. 선진농가들은 기술이나 경영 혁신을 위하여 연구 개발을 위한 정보의 수집과 연구회의 필요성을 크게 강조하고 있었다. 그러나 이러한 선진 농가 이외에 소규모의 농업소득이 낮은 농가도 있었다. 이러한 농가에게는 농업경영에 대한 방향 설정과 추진 방법에 대한 적절한 상담 상대가 없는 것으로 보였다. 이러한 농가들에 대한 시의적절한 정보의 전달, 자력으로 기술과 경영 방책을 만들어내는 힘을 길러주는 지도가 필요하다. 이를 위한 방책으로 그룹의 육성과 가입 촉진이 유효할 것이다. 따라서 한국에 있어서 농촌지도 방법은 크게 두 가지 대상을 의식하여 대 선진농가의 경우에 는 상담 기능, 대 소규모 농가의 청우에는 전달 ${\cdot}$ 교육 기능의 발휘에 있을 것이다. 상담 기능은 정보의 제공과 과도하지 않은 방책을 선택 할 수 있도록 지도 조언하는 것이, 전달 ${\cdot}$ 교육 기능은 과제해결 과정을 체득하게 하는 것이다. 이를 위하여 인터넷의 활용 방법, e-메일에 의한 정보교환 시스템화 등의 연구가 진행되고 있다. 인원의 감소나 겸무화의 진행에 따라 이러한 업무의 수행이 쉬운 것은 아니라고 생각되고, 일 대 일의 지도는 어려울 것이나 집단 지도로는 가능한 측면도 있을 것으로 사료된다.

  • PDF