• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1328-1333
• /
• 2003

In the present study, an integrated framework of geometric modeling, analysis, and design optimization is proposed. Geometric modeling is based on B-spline surface representation. Geometrically-exact shell finite element is implemented in analysis module. Control points of the surface are selected as design variables for optimization, which can make the interaction easier between analysis and surface representation. Sequential linear programming(SLP) is adopted for the shape optimization of surfaces. For the computation of shape sensitivities, semi-analytical method is used. The developed integrated framework should serve as a powerful tool for the geometric modeling, analysis, and shape design of surfaces.

• Science of Emotion and Sensibility
• /
• v.12 no.2
• /
• pp.233-242
• /
• 2009

Recently the studies on user-centered design and form-development have become issues of general interest as the key methods for successful design. For form analysis on user it is important needs that an integrated approach of existing methods and development of expert tool for designer. Moreover analysis methods and tools have to meet with the designers needs of visual result, clear direction, concrete formative factor, user's emotional response and designer-friendly interface. This study proposed the main concepts of form analysis tool based on the user's emotional response ; integrated management, variables set-up, visual result of analysis, in-depth analysis with data mining and correlation, and reinforcement of user-centered analysis. Specific analysis tool consists of 5 functions: Project Management, Analysis Frame Set-up, Data Input-output, Basic Analysis, and In-depth Analysis. The feasibility of proposed tool was verified by a case study of mobile phone design in under-graduate class.

• Archives of design research
• /
• v.17 no.4
• /
• pp.119-128
• /
• 2004

There is a lack of user centered design methods that support effective collaboration between designers and end-users for designing hardware and software integrated digital products. This paper presents the application of Collaborative Design and a new collaborative design prototyping tool for interactive digital product design projects. The tool consists of STCtools(State Transition Chart tools) software, hardware modeling materials, and physical interface toolkits for integrating software and hardware. STCtools allow users to create and edit States, to compose Events describing transitions between States, and to run intermediate or final results of STC. Using the hardware modeling materials and the physical interface toolkit, designers and end-users can collaborately examine the hardware and software integrated concepts in an early stage of the design process. Three collaborative design workshops of designing a portable digital guide for a theme park were accomplished to examine the feasibility of the tool. The results suggested that the tool supported iterative concept development and interactions between designers and end users. Although several user interface problems of STCtools were identified, the participants gave positive feedback on the role of the tool in collaborative concept generation and deployment. It is expected that the results of this study contribute not only to the collaboration between designers and end users, but also to the collaboration between designers, and between designers and other professionals.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.414-417
• /
• 2001

In today's engineering world, any product development activity requires the expertise and the interaction of many different engineering. Therefore the various activities in a product development architecture are highly distributed and interdependent. The interdependence may be due to sharing of databases and transfer of information between various activities. This will require an integrated product model. That can support distributed design such that participants from different backgrounds collaborate towards one common goal. This paper presents the architecture of the product modeling system for the integration of CAD and CAE. It then reports on the study of STEP 10303 and UG open API focused on the integration of different technical environments.

• Journal of Computational Design and Engineering
• /
• v.2 no.4
• /
• pp.261-267
• /
• 2015

Free-form blades are widely used in different industries, such as aero-engine and steam turbine. Blades that are damaged during service or have production deficiencies are usually replaced with new ones. This leads to the waste of expensive material and is not sustainable. However, material and costs can be saved by repairing of locally damaged blades or blades with localized production deficiencies. The blade needs to be further machined after welding process to reach the aerodynamic performance requirements. This paper outlines an adaptive location approach of repaired blade for model reconstruction and NC machining. Firstly, a mathematical model is established to describe the localization problem under constraints. Secondly, by solving the mathematical model, localization of repaired blade for NC machining can be obtained. Furthermore, a more flexible method based on the proposed mathematical model and the continuity of the deformation process is developed to realize a better localization. Thirdly, by rebuilding the model of the repaired blade and extracting repair error, optimized tool paths for NC machining is generated adaptively for each individual part. Finally, three examples are given to validate the proposed method.

• Journal of Environmental Health Sciences
• /
• v.43 no.4
• /
• pp.307-313
• /
• 2017

Objectives: Chemicals derived from various environment media contaminates food across the food supply chain. In Korea, levels of contaminants in food have been sporadically measured by monitoring programs of different government agencies. There is difficulty with data compilation and integrated analysis across media. Therefore, the aim of this study was to propose an overall integrated database and analytical platform design for the 'ECO-FOOD NET (Environmental COntaminant reduction platform for FOOD through an interagency collaboration NETwork)', a tool to support the reduction of environmental contaminants in food. Methods: We developed a new data structure and standardized protocols for the compilation of integrated data. In addition, we conducted subject-oriented logical and physical relational database modeling and created the architecture design of the platform. Results: We established a standardized code system related to exposure media and route, analysis method and food matrix. In addition, we designed the seven software modules of 'About the System', 'Introduction to Interagency Work', 'Media-Chemicals Profiles', 'Method Bank', 'Monitoring Data Base', 'Integrated Media Analysis', and 'Risk-Benefit Analysis'. Conclusions: This study will contribute to decision-making as a tool for executing risk management, such as sustainable reduction policies of contaminants in food.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.4
• /
• pp.834-845
• /
• 1996

Two problems can be happened when we construct Integrated Project Support Environment for construction of software integration environment. The first is a problem about granularity of tool. Problems about interface of tools after combination phase which combine many functions into one and when we use some function of tool with other tools, we can't be use by closed interface. The second is a problem that can be happen when we gather data about process. When we measure the development process for enhancement of it, we can get data with tools, but current tools are not prepared to measurement of development process. In this study, we explained that process information tool is needed and proposed analysis and design methodology and evaluation standard. Finally, we considered and evaluated for problems which can be happened when construct environment which is based on this result of study.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.342-351
• /
• 1998

The purpose of this study is to develop a central database and a database management system to store and manage information systematically from each module of an integrated structural design system. In order to efficiently express structural design process related to the data which is very complex, we used an object-oriented modeling methodology to propose the possibility to apply a database schema for application programs in an integrated system for reinforced concrete structural design. Based on this model, we developed an interface between each module and central database. After modeled by using object modeling technique, the database was mapped by the relational database table. Then the central database and the interface were programed by using Visual C/syo ++/, a windows environmental development tool.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.3
• /
• pp.329-343
• /
• 1995

Traditionally, machining process sequence was influenced and constrained by the design information obtained from CAD data base, i.e., class of operations, geometric shape, tooling, geometric tolerance, etc. However, even though all the constraints from design information are considered, there may exist more than one way to feasibly machine parts. This research is focused on the integrated problem of operations sequencing and machine tools selection in the presence of the product mix and their production volumes. With the transitional costs among machining operations, the operation sequencing problem can be formulated as a well-known Traveling Salesman Problem (TSP). The transitional cost between two operations is expressed as the sum of total machining time of the parts on a machine for the first operation and transportation time of the parts from the first machine to a machine for the second operation. Therefore, the operation sequencing problem formulated as TSP cannot be solved without transitional costs for all operation pairs. When solved separately or serially, their mutual optima cannot be guaranteed. Machining operations sequencing and machine tool selection problems are two core problems in process planning for discretely machined parts. In this paper, the interrelated two problems are integrated and analyzed, zero-one integer programming model for the integrated problem is formulated, and the solution methods are developed using a Tabu Search technique.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.426-432
• /
• 2000

This paper presents methods to design an integrated system for supporting both multimedia contents creations and its presentation in a windows system. Especially, it describes methods for designing an integrated editor that can be used to crate and edit various media data including continuous media such as audio and video. And it also proposes a system model for systematically integrating multimedia creating tool with multimedia presentation system where the heeling and scenario-based presentation methods are included in the propose system for supporting effective multimedia presentation through a network Finally, we describe a threads processing technique based on event monitoring to satisfy effectively needs for presentation control, synchronization control, and user's input control during a multimedia presentation.