• Membrane Journal
• /
• v.29 no.6
• /
• pp.299-307
• /
• 2019

Photocatalysis is an environment friendly technique for degrading organic dyes in water. Tungsten oxide is becoming an active area of research in photocatalysis nanomaterials for having a smaller bandgap than the previously favored titanium dioxide. Synthesis of hierarchical structures, doping platinum (Pt), coupling with nanocomposites or other semiconductors are investigated as valid methods of improving the photocatalytic degradation efficiency. These impact the reaction by creating a redshift in the wavelength of light used, effecting charge transfer, and the formation/recombination of electron-hole pairs. Each of the methods mentioned above are investigated in terms of synthesis and photocatalytic efficiency, with the simplest being modification on the morphology of tungsten oxide, since it does not need synthesis of other materials, and the most efficient in photocatalytic degradation being complex coupling of metal oxides and carbon composites. The photocatalysis technology can be incorporated with water purification membrane by modularization process and applied to advanced water treatment system.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.3
• /
• pp.222-235
• /
• 2018

The hydrocarbon gas leak in the offshore plant can cause large accidents and lead to significant damages to human, property and environment. For prevention of fire or explosion accidents from gas leak, a SIS(Safety Instrumented System) should be installed. In the early stage of the offshore design, required SIL(Safety Integrated Level) is determined and reliability analysis is performed to verify the design in reliability aspects. This study collected data, information related to reliability analysis and created knowledge model of safety design for the offshore system with MBSE(Model-Based Systems Engineering) concept. Knowledge model could support safety engineer's design tasks as the guidance of reliability analysis procedure of safety design and make good conversation with other engineers in yard, class, company, etc.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1812-1820
• /
• 2005

This paper discusses an e-commerce system supporting integrated commerce environments. Generally an e-commerce system advances toward supporting multiple commerce environments. We propose a process programming approach to handle the processes in different environments in integrated manner, which makes an e-commerce system support those environments together. We adopt the technologies from Software Engineering Environment(SEE) to handle processes and environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.351-356
• /
• 2014

Although the demand for histopathological examinations has been increasing, medical accidents in management of specimens also have been increasing because most of the examinations are processed manually which can cause careless handing, confusing information and mismatching during the procedure. In the future, histopatological examination will be used frequently for handing incurable diseases and verification of new drug. Thus, efficient and error-free management system for handling personalized medical history and test results is infallibly necessary. In this paper, I have proposed an integrated printing system for informatization of histopathological examination that support the u-Healthcare environment based on RFID in near future. The proposed system supports systematization of whole examination process and information of pathological samples. This system will contribute to reduction of costs, improvement of operational efficiency, and mostly fundamental prevention of medical accidents.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.960-964
• /
• 2005

Digital Virtual Manufacturing is a technology to facilitate effective product developments and agile productions by digital models representing the physical and logical schema and the behavior of real manufacturing systems including products, process, manufacturing resources and plants. A digital virtual factory as a well-designed and integrated environment is essential for successful applications of this technology. In this research, we constructed a sophisticated digital virtual factory of the shipbuilding company's section steel shop by 3-D CAD and virtual manufacturing simulation. This digital virtual factory can be applied for diverse engineering activities in design, manufacturing and control of the real factory.

• Journal of Engineering Education Research
• /
• v.23 no.5
• /
• pp.16-25
• /
• 2020

This article aims to analyze the experience of designing and operating a class model linking undergraduate and graduate students in engineering education and suggest its development direction. To achieve these objectives, the undergraduate-graduate linked class model was applied to community problem-solving education and a case was analyzed. It also specifically presented the process of how we design the class model and what the actual operational performances and improvements are. This study found that undergraduate and graduate students could build integrated and horizontal cooperative relationships in their classes through undergraduate-graduate linked education and, particularly, graduate students could gain meaningful educational experiences. However, it was difficult to obtain tangible performances through the team activities of these students within a semester. In order for engineering colleges to operate undergraduate-graduate linked education, it would be necessary to provide a longer and more systematic educational environment and better curriculum. The study tried to seek specific tasks and ways to improve them.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.1
• /
• pp.36-44
• /
• 2008

This paper proposes a modeling and simulation process of a panel production line (PPL) in a shipyard. The panel production line is an assembly process to produce a main panel of a flat block and a curved block. In this paper, its activity analysis is carried out using expression of IDEF0, and its process is qualitatively and quantitatively analyzed and modeled by Petri Nets. A commercial discrete event simulation tool, $QUEST^{TM}$, is used for virtual PPL and simulation. The modeling results by Petri Net are mapped to elements of the simulation tool. Finally, an integrated simulation environment of PPL is implemented in order to efficiently utilize the virtual PPL model. With the help of IDEF0 and Petri Nets, we could systematically analyze and describe the PPL process that are characterized as being concurrent, asynchronous, distributed, parallel, nondeterministic, and/or stochastic. Also, the dynamic and concurrent activities of a PPL system were able to be simulated. A timing concept can be included into the Petri nets model to evaluate performance and dependability issues of the system.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.11a
• /
• pp.205-210
• /
• 2006

Nowaday manufacture technology and manufacture environment are changing rapidly. By development of computer and enlargement of technique, most of manufacture field are computerized. It is measured automatically do much quality characteristics thereby and great many data happen in a day. corporations is important if have gotten fast information that are useful from wide data to go first in international competition according to these change. Statistical process control(SPC) techniques are used as a problem solution tool at manufacturing process until present. However, this statistical methods is not applied more extensively because have much restrictions in realistic problem. In this paper, wish to develop more realistic and scientific new statistical design techniques doing to integrate data mining(DM) and statistical methods by the alternative to cope these problem. First step selects significant factor using DM techniques from datas of manufacturing process including much factors and second step wish to find optimum of process after get the estimated response function through response surf ace methodology(RSM) that is statistical techniques.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.37-37
• /
• 2012

The coated steels, mainly with zinc by either hot-dip galvanizing or electroplating, are widely used for panels of automotive, electrical appliances and construction, whose size of world market have reached 130 million tons in 2008. Current issues for the coated steels can be integrated in terms of high functionality, low cost, environment-friend and available resource. The best solution can be provided if thin layer coating with higher quality is produced by an eco-friendly process, and PVD, physical vapor deposition, can be an alternative practice to existing coating processes. PVD technologies have been very common ones in electronic and semiconductor industries, but recognized as non-profitable processes for the coated steels due to low process speed and lack of continuous operation skills. Systematic researches from 1990s in Europe, even though discouraged by a shutdown of the first Japanese PVD coating plant in 1999, have realized several continuous PVD coating plants, and also enhanced launching of developments in steel industries. To be successful with PVD coating technologies over existing ones, productivity to meet economics should be created from a highly sophisticated process. Some PVD technologies fit for the high-speed process will be introduced together with experiences from industrial applications.

• International Journal of Precision Engineering and Manufacturing
• /
• v.1 no.2
• /
• pp.124-131
• /
• 2000

A shop floor can be considered as and importand level to develop a Computer Integrated Manufacturing system (CIMs). The shop foor is a dynamic environment where unexpected events contrinuously occur, and impose changes to planned activities. The shop floor should adopt an appropriate control system that is responsible for scheduling coordination and moving the manufacturing material and information flow. In this paper, the architecture of the hybrid control model identifies three levels; i.e., the shop floor controller (SFC), the cell controller(CC) and the equipment controller (EC). The methodology for developing these controller is employ an object-oriented approach for static models and IDEF0 for function models for dispatching a job. SFC and CC are coordinated by employing a multi-factors bidding and an adapted Analytic Hierarchy Process(AHP) prove applicability of the suggested method. Test experiment has been conducted by with the shopfloor, consisting of six manufacturing cells.