• 한국전자파학회논문지
• /
• 제23권4호
• /
• pp.507-514
• /
• 2012

본 논문에서는 함체 내부의 PCB에 있는 트레이스 파원에 의한 함체의 공진 특성 해석법을 제안하고 있다. 함체 내부의 전자계를 계산하기 위해 PCB 트레이스에 형성되는 전류 분포 및 PCB 유전체의 경계면에서 만족하는 경계면 전계 분포에 관한 연립 적분방정식을 유도하였으며, 연립 적분방정식의 해는 Galerkin의 모멘트 법으로 구하고 있다. 그 결과, 함체의 공진 특성은 실험 결과 및 HFSS 툴에 의한 시뮬레이션 결과와도 잘 일치하고 있으며, 함체의 공진 주파수는 PCB 트레이스의 위치에 의해 달라진다는 것을 확인하고 있다. 이론 해석의 타당성을 검증하기 위해 반사 계수의 이론치를 측정치와도 비교하고 있다.

• Journal of Power Electronics
• /
• 제11권5호
• /
• pp.639-654
• /
• 2011

This paper presents a Current Distribution Control design for Paralleled Positive Output Elementary Super Lift Luo Converters (PPOESLLCs) operated in Continuous Conduction Mode using a Sliding Mode Controller (SMC). Manipulating the higher current requirement of the load through the paralleling of POESLLCs, results in a current inequality. This is mainly due to dissimilarities in the power semiconductor switches and circuit components used in POESLLCs, which may lead to converter failures. In order to balance the proper load current sharing and the load voltage regulation of PPOESLLCs, a SMC is developed. The SMC is designed for the inherently variable-structured of POESLLCs by using the state-space average based model. The static and dynamic performance of the developed controller with PPOESLLCs is validated for its robustness to perform over a wide range of operating conditions through both a laboratory prototype and MatLab/Simulink models, which are compared with a Proportional-Integral (PI) controller. Theoretical analysis, simulation and experimental results are presented to demonstrate the feasibility of the developed SMC along with the complete design procedure.

• Wind and Structures
• /
• 제28권1호
• /
• pp.49-62
• /
• 2019

In this paper, an analytical analysis for the study of vibratory behavior and wave propagation of functionally graded plates (FGM) is presented based on a high order shear deformation theory. The manufacture of these plates' defects can appear in the form of porosity. This latter can question and modify the global behavior of such plates. A new shape of the distribution of porosity according to the thickness of the plate was used. The field of displacement of this theory is present of indeterminate integral variables. The modulus of elasticity and the mass density of these plates are assumed to vary according to the thickness of the plate. Equations of motion are derived by the principle of minimization of energies. Analytical solutions of free vibration and wave propagation are obtained for FGM plates simply supported by integrating the analytic dispersion relation. Illustrative examples are given also to show the effects of variation of various parameters such as(porosity parameter, material graduation, thickness-length ratio, porosity distribution) on vibration and wave propagation of FGM plates.

• Structural Engineering and Mechanics
• /
• 제86권4호
• /
• pp.535-546
• /
• 2023

In the present paper, multiple interface cracks between a functionally graded orthotropic coating and an orthotropic half-plane substrate under concentrated loading are considered by means of the distribution dislocation technique (DDT). With the use of integration of Fourier transform the problem is reduced to a system of Cauchy-type singular integral equations which are solved numerically to compute the dislocation density on the surfaces of the cracks. The distribution dislocation is a powerful method to calculate accurate solutions to plane crack problems, especially this method is very good to find SIFs for multiple unequal cracks located at the interface. Hence this technique allows considering any number of interface cracks. The primary objective of this paper is to investigate the effects of the interaction of multiple interface cracks, load location, material orthotropy, nonhomogeneity parameters and geometry parameters on the modes I and II SIFs. Numerical results show that modes I/II SIFs decrease with increasing the nonhomogeneity parameter and the highest magnitude of SIF occurs where distances between the load location and crack tips are minimal.

• Steel and Composite Structures
• /
• 제45권3호
• /
• pp.305-330
• /
• 2022

This article aims to investigate the static deflection and stress analysis of bi-directional functionally graded porous plate (BDFGPP) modeled by unified higher order kinematic theories to include the shear stress effects, which not be considered before. Different shear functions are described according to higher order models that satisfy the zero-shear influence at the top and bottom surfaces, and hence refrain from the need of shear correction factor. The material properties are graded through two spatial directions (i.e., thickness and length directions) according to the power law distribution. The porosities and voids inside the material constituent are described by different cosine functions. Hamilton's principle is implemented to derive the governing equilibrium equation of bi-directional FG porous plate structures. An efficient numerical differential integral quadrature method (DIQM) is exploited to solve the coupled variable coefficients partial differential equations of equilibrium. Problem validation and verification have been proven with previous prestigious work. Numerical results are illustrated to present the significant impacts of kinematic shear relations, gradation indices through thickness and length, porosity type, and boundary conditions on the static deflection and stress distribution of BDFGP plate. The proposed model is efficient in design and analysis of many applications used in nuclear, mechanical, aerospace, naval, dental, and medical fields.

• 무역학회지
• /
• 제47권3호
• /
• pp.191-209
• /
• 2022

Whether or not insurance policies are securities has been debated for nearly a century. The position of claiming that an insurance policy has securities properties is premised on the concomitant nature of the maritime cargo insurance policy to the bill of lading. However, in reality today, marine cargo insurance policies are transferred between parties involved in international trade as an integral part of the bill of lading, and the two securities go through the same distribution process. The issue of recognizing the securities properties of an insurance policy is particularly debated when the insurance policy is issued in a order or bearer form. In a normal insurance policy, the name of the right holder, such as the claimant, is written on the insurance policy, and it is not usually transferred by endorsement. In principle, insurance policies are interpreted as neither securities nor negotiable securities. Sometimes, research is being done on legal reform to respond to digitalization of securities, and bills of lading are the subject of research. If marine cargo insurance policies, which are sometimes premised on distribution, have securities properties, the status of the regulations on digitization of bills of lading currently being studied may be helpful for digitization of marine cargo insurance policies. Under these circumstances, the securities of marine cargo insurance policies are reviewed based on recent practices.

• 산경연구논집
• /
• 제15권3호
• /
• pp.1-9
• /
• 2024

Purpose: This research aimed at understanding the dynamics of consumer behavior in the context of nostalgic desserts. The primary objective is to scrutinize how different attributes like quality, health, convenience, and trend influence customer satisfaction and their subsequent decision to repurchase nostalgic desserts. Research Method: The study leverages structural equation modeling, incorporating statistical tools such as SPSS and AMOS for a thorough analysis. It involves collecting data over a specified period, followed by correlation and trend analyses to deduce patterns and relationships. Results: The findings reveal that attributes such as quality, health, convenience, and trend significantly impact customer satisfaction and repurchase intentions. Interestingly, economic factors appeared to have a negligible effect on these decisions. The study offers a comprehensive understanding of the factors that influence consumer decisions in the context of nostalgic desserts, providing valuable implications for both academic research and practical marketing strategies. Conclusions: The insights garnered from this research are pivotal for formulating marketing strategies for nostalgic dessert brands. It underscores the importance of accentuating quality, health, and trend in product offerings to boost customer satisfaction and encourage repurchases. The study also sheds light on the evolving nature of consumer preferences and the integral role of nostalgia in shaping purchasing behaviors.

• 한국수자원학회논문집
• /
• 제36권6호
• /
• pp.961-969
• /
• 2003

토양수분 분포의 시공간적인 예측을 위하여 유사 동력학 상태의 습윤지수 계산과정을 정리하였고, 우량 자료를 회귀적분한 동력학적 습윤지수의 계산 알고리즘을 개발하였다. 설마천 유역의 수치고도 모형과 2년간의 우량자료를 활용하여 동력학적 상태의 습윤지수의 시ㆍ공간적인 거동을 분석하였다. 공간적인 거동은 동력학적인 습윤지수가 유사 동력학적 상태나 정적인 습윤지수와 비교하여 흐름분산 특성이 강조된 분포특성을 보여주었다. 통계적인 특성으로는 시간이 경과함에 따라 유사동력학적 습윤지수나 동력학적 습윤지수 모두 정상상태 습윤지수에 근접하나, 동력학적 습윤지수의 경우 두 개의 상이한 분포특성이 나타났다.

• 보존과학회지
• /
• 제36권1호
• /
• pp.1-14
• /
• 2020

This study investigates the crystallinity distribution of ancient silk. Owing to the inherent multi-hierarchical structure of silk protein and the complicated structural changes that occur due to various burial environments, it is challenging but worthwhile to study ancient silk ageing behavior, which is based on the fact that ageing begins with a single fiber and then spreads to a whole fabric. Crystallinity was one of the most effective indicators found to reveal the ageing status of silk. Therefore, a synchrotron radiation-based X-ray diffraction(SR-XRD) method was employed to study the crystallinity distribution of single fibers of ancient silk unearthed from seven archaeological sites in China from historical periods including the warring states, Han dynasty, Song dynasty, and Ming dynasty. In comparison, the conventional X-ray diffraction method, which uses large amounts of samples, was also performed to determine the integral crystallinity of ancient silk. Thermal stability experiments by thermogravimetry(TG) as well as morphology observations by scanning electron microscopy(SEM) and optical microscopy(OM) all confirmed the deterioration of ancient silk. Moreover, the ageing mechanism of ancient silk was proposed with the assistance of an artificial ageing study. The results confirmed the effectiveness of SR-XRD as an ageing indicator, revealing the crystallinity distribution. This research could provide motivation to determine the deterioration status of ancient silk, and would also aid in explaining the fragility of ancient silk due to ageing.

• Structural Engineering and Mechanics
• /
• 제89권2호
• /
• pp.103-119
• /
• 2024

The present research investigates the thermodynamically bending behavior of FG sandwich plates, laying on the Winkler/Pasternak/Kerr foundation with various boundary conditions, subjected to harmonic thermal load varying through thickness. The supposed FG sandwich plate has three layers with a ceramic core. The constituents' volume fractions of the lower and upper faces vary gradually in the direction of the FG sandwich plate thickness. This variation is performed according to various models: a Power law, Trigonometric, Viola-Tornabene, and the Exponential model, while the core is constantly homogeneous. The displacement field considered in the current work contains integral terms and fewer unknowns than other theories in the literature. The corresponding equations of motion are derived based on Hamilton's principle. The impact of the distribution model, scheme, aspect ratio, side-to-thickness ratio, boundary conditions, and elastic foundations on thermodynamic bending are examined in this study. The deflections obtained for the sandwich plate without elastic foundations have the lowest values for all boundary conditions. In addition, the minimum deflection values are obtained for the exponential volume fraction law model. The sandwich plate's non-dimensional deflection increases as the aspect ratio increases for all distribution models.