• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.642-649
• /
• 2001

Precision parts and instruments are tested to evaluate performance in development-process and product-step to prement a potential defect due to a failure design. In this paper, Environmental test technology, which is the basis of reliability analysis, is introduced with examples of test criterion, test method for products, encoder and traffic signal controller, and measuring instruments. Recently, as the importance of the environmental test technology is recognised. It is proposed that tranining of test technician and technology of jig design and failure analysis are very essential.

• Journal of Technology Innovation
• /
• v.12 no.2
• /
• pp.185-208
• /
• 2004

Production of goods and services always necessarily depends on the use of knowledge. The knowledge intensity of production , however, has increased manifold in the last two decades or so. This is clearly indicated by the rise in the share of knowledge intensive products, which are traded. The production and export of these advanced products are not confined to developed countries alone, but also among developing countries. But in the latter there is considerable concentration of it in a handful of countries primarily in the Asian region. Knowledge underlying production, whether industrial or non-industrial, embodies two types of knowledge: formal and non-formal. In this paper we are entirely concerned with the financing of the creation of formalized knowledge in the context of two similar Asian developing countries, namely Singapore and Malaysia. Three broad types of financial instruments are considered: research grants, tax incentives and venture capital. Both the countries are shown to be having very similar financial instruments for promoting innovation. The timing of these instruments is quite similar too. But one country has performed much better than the other. The main argument of the paper is that while financial instruments are a necessary input for innovation, the sufficient condition lies in the supply of a sufficient quantity of scientists and engineers.

• Journal of Korean Elementary Science Education
• /
• v.27 no.4
• /
• pp.341-355
• /
• 2008

The purpose of this study was to analyze the measuring abilities of elementary school students by using a microgenetic method. The participants were seven elementary students in the fourth grade. To analyze their measuring abilities, students attended three physical quantities measuring tasks such as length, volume, and time task by six times. Results were as follows. First, in the measuring length task, students selected appropriate measuring instruments but they didn't consider measuring amounts. And as their measuring experience increased, they desirably improved management abilities of measuring instruments. In the measuring volume task, they dealed with measuring instruments, but not very well. And these tendency were maintained. In the measuring time task, they were not measure exactly. Second, as their measuring experience increased, their ability to read the scale marks improved. However, they had difficulties in estimating the volume between scale marks. Results indicate that, elementary students need to basic education about measuring instruments, their usage, and scale reading ability for their science experiment courses in schools.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.12
• /
• pp.1423-1436
• /
• 1992

In the paper, a CAT interface supporting multitask is realized. To interface a computer with measuring instruments, a GPIB card is designed and implemented. Controlling and displaying software using OOP and GUI are programmed with C++. A spectrum analyzer and a power meter are chosen as object instrument to be controlled. Total 9 modules are configured to manage the various resources and each module in integrated system. Also in case that several instruments are used, the system is realized to be capable of multitasking to exchange the data mutually. The multitasking is implemented under the time-sharing DOS environment. Thread-based method is used for processing, and Round Robin method for scheduling. Provided proper software modules for other object instruments are integrated, the system can control more measuring instruments simultaneously by the computer. Users can save the time and errors even without expert knowledge.

• Restorative Dentistry and Endodontics
• /
• v.37 no.4
• /
• pp.220-227
• /
• 2012

Objectives: The study was to compare the shaping ability of Reciproc (VDW) and WaveOne (Dentsply Maillefer) instruments compared with ProTaper, Profile and hand instrument during the preparation of simulated root canals. Materials and Methods: Five groups (n = 5) were established. Reciproc, WaveOne, ProTaper, Profile and K file (K-flexo file) were used to prepare the resin simulated canals. A series of preoperative and postoperative images were taken by a microscope and superimposed in 2 different layers. The amount of resin removed from both the inner and the outer sides of the canal was measured to the level of 10 mm from the apical tip, with a 1 mm increment. Results: The mean of resin removal from the inner canal wall was not different from the outer canal wall for Reciproc and WaveOne groups at apical third (1 - 3 mm level). There was no difference in the change of working length and maintenance of canal curvature. NiTi instruments are superior to stainless-steel K file in their shaping ability. Conclusions: Within the limitation of this present study, Reciproc and WaveOne instruments maintained the original canal curvature in curved canals better than ProTaper and Profile, which tend to transport towards the outer canal wall of the curve in the apical part of the canal.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.6
• /
• pp.689-698
• /
• 2007

Particular attention is paid to the validity of PM-10 measurement using beta attenuation method. In this study, the inter-comparison studies were undertaken for PM-10 sampler with different measuring methods. The three beta attenuation monitoring instruments (BAM1020, FH C-14, and DIGS-150) and filter based gravitational method using High Volume Air Sampler were collocated and mass concentrations were compared from August to November, 2006. The results of the investigation show that beta attenuation monitoring instruments are comparable with gravitational method within 10% of measurement error. For specific conditions under high humidity and high concentrations, the inter-comparison results also showed a relatively good agreement and this can be explained as the effect of inlet heating of beta attenuation instrument. Subsequently, this study shows that beta attenuation monitoring instruments can be equivalently used with reasonable validity when compared gravimetric method.

• The Journal of Korean Physical Therapy
• /
• v.23 no.6
• /
• pp.23-29
• /
• 2011

Purpose: The aim of this study was to validate the Korean version of World Health Organization Disability Assessment Schedule 2.0 (KWHODAS 2.0) in 12 item-self administered version (12-self). Methods: The KWHODAS 2.0 and Korean Functional Rating index (KFRI) were tested for internal consistency, ceiling and floor effects, and concurrent validity in 111 patients with low back pain and/or neck pain. Results: A very high level of internal consistency was shown for both instruments; ${\alpha}$=0.96 with KWHODAS 2.0; 12-self and ${\alpha}$=0.97 for KFRI. No ceiling and/or floor effects were found in both the instruments. The KWHODAS 2.0 and KFRI were highly correlated (r=0.77), and the relationship of each item between KWHODAS 2.0 and KFRI was ranging from r=0.09 to 0.72. Conclusion: We conclude that the KWHODAS 2.0: 12-self and KFRI are reliable and are valid instruments for the measurement of disability in Korean speaking patients with low back and/or neck pain. Both instruments, the KWHODAS 2.0; 12-Self and KFRI are now suitable for use in clinical practice and research applications.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.92-99
• /
• 2010

Photoexcitation of a precursor ion inside a cell floated at high voltage installed in a tandem time-of-flight (TOF) mass spectrometer provides triple tandem mass spectrometric information and allows kinetic and mechanistic studies. In this work, the factors affecting, or downgrading, the performance of the technique were identified. Ion-optical and computational analyses showed that an optimum instrument could be designed by utilizing a reflectron with linear-plus-quadratic potential inside. Theoretical predictions were confirmed by tests with instruments built with different ion-optical layout. With optimized instruments, masses of intermediate ions in the consecutive dissociation of a precursor ion could be determined with the maximum error of $\pm5$ Da. We also observed excellent agreement in dynamical parameters (critical energy and entropy) for the dissociation of a model peptide ion determined by instruments with different ion-optical layout operated under optimum conditions. This suggests that these parameters can be determined reliably by the kinetic method developed previously when properly designed and operated tandem TOF instruments are used.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.2
• /
• pp.184-190
• /
• 2008

This paper describes a message model based on XML (eXtensible Markup Language) to present real-time data from sensors and instruments at manufacturing processes for web service. HTML (Hyper Text Markup Language) is inadequate for describing real-time data from process control plants while it is suitable for displaying non-real-time multimedia data on web. For XML-based web service of process data, XML format for the data presentation was proposed after investigating data of various instruments at steel-making plants. Considering transmission delay inevitably caused from increased message length and processing delay from transformation of raw data into defined format, which was critical for operation of a real-time system, its performance was evaluated by simulation. In the simulation, we assumed two implementation models for conducting the transformation function. In one model, transformation was done at an SCC (Supervisory Control Computer) after receiving real-time data from instruments. In the other model, transformation had been carried out at instruments before the data were transmitted to the SCC. Various tests had been conducted under different conditions of offered loads and data lengths and their results were described.

• Research in Community and Public Health Nursing
• /
• v.29 no.2
• /
• pp.155-169
• /
• 2018

Purpose: The purpose of this study is to review the quantitative research literature on measuring caring in order to identify overall trends in measuring caring. Methods: Fifty three papers were selected from four databases including RISS4U, DBpia, KISS, and Korea Med. Results: The number of measuring caring papers has increased since 2000. Approximately 60 % of the total papers were descriptive and correlative design researches with convenience sampling. Jean Waston's theory was the most popular conceptual framework, but much of the research tended to be conducted without any conceptual framework. In that kind of research, 'caring' terms were used without definition. The most frequently used term for the concept of caring was nurses' caring behaviors. Also, 'nurses' was one of the most popular subjects. Thirty six measuring caring instruments were used. Twenty were developed in foreign countries and translated into Korean. The others were developed originally in Korean. Interpersonal Caring Technique - Communication Skills Scale, based on the interpersonal process model, was the most frequently used tool. Among the translated instruments, Coates' Caring Efficacy Scale was the most popular. Some instruments were used without validation. Conclusion: These results provide basic data on measuring caring and indicate directions for further research. In particular, validation studies of measuring caring instruments are needed.